2019 Ford Edge Ignition and Tune-Up Products

Name: Double Platinum Spark Plug: Long-Lasting Performance & Durability
Brand: ACDelco
SKU: 41-814
Price: 10.99 USD

Below you will find various in-demand Ford Ignition and Tune-Up Products, components and accessories for your 2019 Edge. Advance Auto Parts has popular Edge parts like Ignition Coils and Boots, Ignition Switches, Distributors and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other Edge model years including 2015, 2016, 2017, 2018, 2020, 2021, 2022, 2023, 2024 and more. Select a category of 2019 Ford Edge Ignition and Tune-Up Products below and start saving instantly.

Popular 2019 Ford Edge Ignition and Tune-Up Products Categories

Spark Plugs

Ignition Coils

Ignition Starter Switches

Air Distribution Duct Clips

Essential Ignition and Tune-Up Products for 2019 Ford Edges

from

$10.99

ACDelco Gold (Professional) Double Platinum Spark Plug are a high quality alternative to Original Equipment (OE) parts. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

from

$17.99

NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributor less ignition systems.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs

from

$17.99

NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:

SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhance fuel efficiency, making them ideal for performance enthusiasts.
Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and anti-fouling properties, ensuring reliable performance and longevity.

from

$4.99

The Platinum Spark Plug is expertly crafted to deliver enhanced durability and performance for older engine applications. Featuring a platinum center electrode firing tip, it ensures quicker firing, smoother starts, and improved fuel efficiency while resisting gap erosion for a longer service life. Its high alumina ceramic insulator provides superior thermal conductivity and insulation, boosting strength and reliability under demanding conditions. The multi-rib insulator design prevents flash-over, ensuring consistent performance, while the nickel-plated shell offers exceptional corrosion resistance for extended durability. With a mid-projection standard electrode design and a tapered seat type, this performance-grade spark plug is built to meet the needs of discerning drivers. Whether you’re seeking better acceleration or reliable ignition, this spark plug delivers value and dependability with every drive.

Product Features:

Engineered with a platinum firing tip that prevents gap erosion for longer service life.
Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
The multi-rib insulator prevents flash-over.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
Built with a mid-projection standard electrode design to optimize ignition performance and support smoother engine starts.

from

$16.99

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs

from

$6.99

Engineered to meet strict Ford engineering standards, these spark plugs deliver original equipment performance and reliability. Matched to specific engines, they enhance durability, eliminate misfires, reduce fuel consumption, and optimize emissions. With an exact fit for Ford, Lincoln, and Mercury vehicles, they are resistant to oxidation and arc erosion. The multi-rib insulator protects against misfire, and they offer service intervals of up to 100,000 miles. Designed with high-quality materials, including an iridium center electrode tip and platinum ground electrode tip, these spark plugs provide reliable performance for almost any application. Backed by Motorcraft’s Service Parts Warranty, they help prevent false check engine lights and are what was in the vehicle when it was manufactured.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.
Engineered for Durability: The Motorcraft Fine Wire Platinum Spark Plug is designed to meet strict Ford engineering standards, ensuring long-lasting performance and reliability.
High-Quality Materials: Featuring an iridium center electrode tip and a platinum ground electrode tip, these spark plugs are built with premium materials for enhanced performance and longevity.

from

$44.99

ACCEL HP Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL HP Spark Plugs are capable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL HP Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.

Product Features:

The Copper core is a better conductor than Iridium or Platinum plugs
Copper dissipates heat much better than other materials
C – Cut Design un-shrouds the spark kernel for a better burn
Unlike Iridium or Platinum plugs, the ACCEL HP plugs are capable
Machine rolled threads for precise thread engagement
Stock Heat Range
Whether using on the street or on the strip, ACCEL HP Copper Core spark plugs deliver.

from

$70.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Copper alloy conductors ensure superior electrical conductivity with low resistive losses
Our parts are 100% tested to verify both mechanical and electrical switching performance
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$83.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Direct-fit, OE replacement parts – identical to factory installed parts. Robust design helps provide long operating life and excellent performance.
All OE switch functions are maintained. Factory connectors help ensure a solid, positive connection. Provided factory mounting points ensure easy installation – new gaskets and attaching hardware is included, where applicable.

from

$70.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$28.49

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$7.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$92.99

Benefits of Bosch original equipment quality ignitions coils include the right ignition voltage, long lasting spark, better engine running conditions, lower fuel consumption, and reduced exhaust emissions.

Product Features:

Meets or exceeds OEM specification
Ensures reliable voltage for smooth engine performance

from

$399.99

Coil;RED;Ford Eco-Bo

from

$78.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$99.99

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 years’ experience and are driven by extreme dedication to innovation, performance and quality. With state-of-the-art manufacturing, inventory and distribution facilities in North America and globally, NGK is dedicated to providing customers with world-class products and services. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience. NGK ignition coils have vast coverage including late-model domestic and import vehicles. NGK’s OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist.

Product Features:

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$96.99

Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.

Product Features:

Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues

from

$271.99

Coil; Ford EcoBoost

from

$122.99

ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

Product Features:

Specialized silicone magnetic steel cores are surrounded by precision wrapped windings using advanced bobbin technology which helps maintain the proper resistance and turn ratios necessary to deliver improved performance spark
Specialized Silicone Magnetic Steel Cores with Optimized Windings
Direct Plug In Replacement results in a Direct OE Fit
OBD ll Safe, so you won’t be throwing codes, just sparks
These Are A Direct Performance Bolt On Upgrade
The Accel Bodies Are Molded In High Dielectric Strength Material

from

$102.99

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.

Product Features:

These coils provide the exact spark timing that helps maximize the engine and emissions performance
RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
Engineered to help withstand temperature extremes
Internal insulation displacement connection is helps make high-reliability internal connections
Interior insulation helps ensure no internal arcing
Right fit for each application; helps provide ease of installation and removal
High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
Housings engineered to help resist cracking in the most extreme conditions
Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output

from

$80.99

As the innovator and leader in stick coil technology DENSO has conducted superior testing and inspection processes to insure the highest quality ignition coil. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:

First Time Fit
Built to DENSO Original Equipment Standards

from

$368.99

Coil; Ford EcoBoost

from

$233.99

Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$46.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$97.99

First Time Fit
Built to DENSO Original Equipment Standards

from

$74.99

These coils provide the exact spark timing that helps maximize the engine and emissions performance
RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
Engineered to help withstand temperature extremes
Internal insulation displacement connection is helps make high-reliability internal connections
Interior insulation helps ensure no internal arcing
Right fit for each application; helps provide ease of installation and removal
High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
Housings engineered to help resist cracking in the most extreme conditions
Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output

from

$88.99

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

from

$90.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

Upgrade your 2019 Ford Edge with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2019 Ford Edge, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your Edge functioning at its best. At Advance Auto Parts, we offer a wide selection of 16 Ignition and Tune-Up Products for the 2019 Ford Edge, designed to meet your needs without breaking the bank. From Ignition Coils and Boot replacements to Ignition Switches upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 2019 Ford Edge at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $6.99 to $99.99, with an average price of $31.72. Our 16 Ignition and Tune-Up Products in stock come from 8 trusted brands, so you’re sure to find the right part for your 2019 Ford Edge without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2019 Ford Edge, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like Autolite E3, and more. Autolite Ignition and Tune-Up Products start at just $6.99 and boast an impressive 4.6 stars average rating from customers. With 546 customer reviews and counting, our 2019 Ford Edge Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2019 Ford Edge is always ready to roll. We’re committed to providing you with everything you need to keep your Edge in top shape, all in one place. Start shopping confidently below for your 2019 Ford Edge!

Best-Selling Ignition Coils and Boots for 2019 Ford Edges

Enhance the driving experience in your Ford with 2 quality Ignition Coils and Boot components, starting at $78.99.

show more show less

from

$78.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$99.99

OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
THE NGK DIFFERENCE: Featuring superior materials and design enhancements
EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

Top Picks for 2019 Ford Edge Distributors

Upgrade Ford Edges with top-quality Distributors parts, including 1 OEM and aftermarket selections for your 2019 model.

show more show less

from

$7.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

In-Demand Spark Plugs for 2019 Ford Edges

Select from 11 premium Spark Plugs parts for your 2019 Ford Edge, with prices ranging from $6.99 to $44.99.

show more show less

from

$6.99

The Double Platinum Spark Plug is engineered for exceptional durability and performance, making it a top choice for distributor-less ignition system (DIS) engines. Featuring a platinum-to-platinum design, it minimizes gap erosion and reduces misfires, ensuring a longer service life compared to copper and standard platinum plugs. Its yttrium-enhanced ground electrode delivers superior heat transfer, providing unmatched durability under high temperatures and pressure. The high alumina ceramic insulator optimizes thermal conductivity and dielectric strength, while the multi-rib insulator prevents flash-over for reliable operation. With a mid-projection center electrode and tapered seat type, this performance-grade spark plug is designed to meet demanding engine requirements. Both the center and ground electrode tips are crafted from platinum, ensuring consistent ignition and enhanced efficiency. Whether you’re seeking improved durability or superior performance, this spark plug delivers value and reliability for your engine’s needs.

Product Features:

Engineered with a platinum-to-platinum design that prevents gap erosion, extending the life of the spark plug.
The yttrium-Enhanced Ground Electrode delivers superior heat transfer that delivers more durability under high temps and pressure for greater life.
Its high alumina ceramic insulator provides optimum thermal conductivity and dielectric strength.
The multi-rib insulator prevents flash-over.
Designed with a mid-projection center electrode and tapered seat type to meet the demanding requirements of high-performance engines.

from

$8.49

The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.74 is a 14mm, 1.000 reach plug with a taper seat. It fits a wide variety of late model applications, especially Ford applications. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:

E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn
Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
Enhanced Heat Transfer: Three legs securing the Diamond FIRE electrode to the shell ensure excellent heat transfer and create more turbulence in the cylinder.
Wide Compatibility: The E3.74 spark plug is a 14mm, 1.000 reach plug with a taper seat, fitting a wide variety of late model applications, especially Ford vehicles.
Eco-Friendly Performance: Proven to reduce fuel consumption and improve hydrocarbon emissions, contributing to a cleaner environment.
Long-Term Efficiency: The Diamond FIRE side wire is designed for long-term use, maintaining increased power and reduced fuel consumption over time.

from

$13.49

ACDelco GM Original Equipment Iridium Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They are our latest in spark plug technology and an exact replacement for your vehicle’s original components. Iridium composition provides a high melting point and great strength, and provides excellent wear resistance and durability. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Iridium is the latest in spark plug technology and is an exact replacement for vehicles’ original components
Iridium composition provides a high melting point and great strength, helps to provide excellent wear resistance and durability
Iridium offers excellent engine idle stability, reliable cold starting, quick acceleration and smooth performance
Three Piece Fired in Suppressor seal meters spark energy for long electrode life, helps prevent combustion leakage and helps block radio frequencies that can affect vehicle electronics
Iridium plugs are laser-welded which provides precision welds, reduces excess debris and wear rate, thus increasing durability
Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$15.99

NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug, Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.

Product Features:

HIGH IGNITABILITY PROJECTED SQUARE PLATINUM ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with a unique cut-back PSPE ground electrode
RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
PSPE DESIGN: Projected square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modern vehicles using OE PSPE type spark plugs or for those seeking an aftermarket plug with the latest OE technology

from

$9.79

Spark Plug (CYFS12YPT) delivers reliable performance and durability, making it the ideal choice for maintaining your vehicle’s efficiency. Engineered to meet strict Ford standards, these Motorcraft spark plugs are specifically matched to engines for enhanced durability, reduced fuel consumption, and optimized emissions. Designed with high-quality materials, they resist oxidation and arc erosion, ensuring long-lasting reliability. The multi-rib insulator protects against misfires, while the exact fit guarantees seamless compatibility with Ford, Lincoln, and Mercury vehicles. With service intervals of up to 100,000 miles, these spark plugs provide exceptional value and peace of mind. Backed by Motorcraft’s Service Parts Warranty, they help prevent false check engine lights, delivering confidence and performance for a broad range of domestic and import cars and trucks. Whether you’re replacing original equipment or upgrading, Motorcraft spark plugs are the trusted solution for maintaining your vehicle’s peak performance.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

from

$15.99

SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
Outstanding Acceleration and High Fuel Efficiency: NGK Iridium IX spark plugs are engineered to deliver superior acceleration and enhance fuel efficiency, making them ideal for performance enthusiasts.
Extreme Ignitability and Anti-Fouling: These spark plugs offer exceptional ignitability and are designed to resist fouling, ensuring reliable performance in various driving conditions.
Improved Starting, Idling, and Throttle Response: The tapered cut ground electrode design enhances starting, idling, and throttle response, contributing to a smoother driving experience.

from

$9.99

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

0.6 mm finewire design improves ignitability
Patented V-trimmed platinum sidewire technology resists wear
OE equivalent design is engineered for every engine
Designed for better overall durability with virtually no gap erosion
Double Iridium-Enhanced Alloy Technology Center Electrode: Offers improved durability and wear resistance for a longer-lasting spark plug.
Engineered in the USA: Designed with over 100 years of Autolite engineering experience for superior quality and performance.
Proven Track Record: Autolite has sold over 11 billion spark plugs, showcasing a legacy of reliability and trust.

from

$9.49

NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:

SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
Enhanced Durability: Designed to last longer and perform better under various driving conditions.

from

$16.99

NGK Laser Iridium spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium spark plugs are tested to the highest standards to ensure quality and durability. Iridium tipped center electrode provides durability six times harder than platinum. NGKs high grade pure alumina ceramic and 98 percent pure copper core prevents the spark plug from overheating while providing reliable starts. Most Laser Iridium spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:

ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire iridium alloy center electrode provides consistent performance
IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
RECOMMENDED USAGE: Best for vehicles with OE fine wire iridium alloy plugs
Superior Durability: The iridium-tipped center electrode is six times harder than platinum, ensuring long-lasting performance.
OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring a perfect fit and optimal performance.
Even Wear: Features a platinum pad on the ground electrode for even wear, particularly beneficial in distributorless ignition systems.
Fine Wire Tip Design: The fine wire tip design of the ILTR6R8G model enhances ignition efficiency and performance.

from

$44.99

The Copper core is a better conductor than Iridium or Platinum plugs
Copper dissipates heat much better than other materials
C – Cut Design un-shrouds the spark kernel for a better burn
Unlike Iridium or Platinum plugs, the ACCEL HP plugs are capable
Machine rolled threads for precise thread engagement
Stock Heat Range
Whether using on the street or on the strip, ACCEL HP Copper Core spark plugs deliver.

from

$13.99

Motorcraft Spark Plugs are expertly crafted to deliver enhanced durability, optimized performance, and unmatched reliability for Ford, Lincoln, and Mercury vehicles. Designed with high-quality materials, these spark plugs feature an iridium center electrode tip and platinum ground electrode tip, ensuring resistance to oxidation and arc erosion for long-lasting performance. The multi-rib insulator minimizes misfires, while the tapered seat type guarantees an exact fit for seamless installation. Engineered to meet strict Ford standards, these spark plugs help reduce fuel consumption, optimize emissions, and prevent false check engine lights, making them ideal for service intervals of up to 100,000 miles. Backed by Motorcraft’s Service Parts Warranty, they are the original equipment choice for maintaining your vehicle’s factory performance and reliability. Whether for domestic or import cars and trucks, Motorcraft Spark Plugs provide confidence and efficiency, ensuring your engine runs smoothly and efficiently.

Product Features:

Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
Backed by Motorcraft’s Service Parts Warranty
Exact fit for Ford, Lincoln and Mercury vehicles
Resistant to oxidation and arc erosion.
Multi-rib insulator protects against misfire.
Service intervals of up to 100,000 miles.
Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
Motorcraft ignition components help prevent false check engine lights.

Top-Rated Ignition and Tune-Up Products Brands For Your 2019 Ford Edge

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 2019 Ford Edges. Below you’ll find some of our best rated Ignition and Tune-Up Products from Autolite and E3, and more. Ignition and Tune-Up Products from these brands that fit a 2019 Edge start at just $6.99 and are rated as high as 4.6 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Autolite 2019 Ford Edge Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2019 Ford Edge, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. Autolite ticks all of those boxes. We offer a wide selection of Autolite Ignition and Tune-Up Products, specifically designed for the 2019 Ford Edge. With over 1 Autolite brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99. Plus, with over 6 customer reviews and an average rating of 4.6 stars, you can trust that our Autolite Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $6.99

(6)

Double Platinum Spark Plug: Enhanced Durability & Performance

“better than OEM”

Popular E3 2019 Ford Edge Ignition and Tune-Up Products

E3 auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 2019 Ford Edge owner should feel confident when installing genuine E3 parts in their vehicle. To ensure the best fit and performance for your 2019 Edge, Advance Auto Parts carries a full inventory of 1 E3 Ignition and Tune-Up Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these E3 Ignition and Tune-Up Products range up to $8.49, plus, with more than 176 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from $8.49

(176)

DiamondFIRE Automotive Spark Plug: More Power, Saves Gas

“Professional help thank you!!!”

FAQs for 2019 Ford Edge Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 2019 Ford Edges?

Out of 16 Ignition and Tune-Up Products that fit 2019 Ford Edges, the following parts are the top sellers:

Iridium Spark Plug: Reliable Cold Starts & Smooth Performance (11400044) – $13.49
Ruthenium HX Spark Plug (LTR6BHX): High Ignitability & Durability (12069668) – $15.99
Spark Plug (CYFS12YPT): Reliable Performance & Durability (12090773) – $9.79

What’s the price range for 2019 Ford Edge Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 2019 Ford Edge start at $6.99 and go up to $99.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 2019 Ford Edge?

The average price for Ignition and Tune-Up Products for the 2019 Ford Edge is $31.72. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Ford Edge model years?

Yes, we currently carry Ignition and Tune-Up Products for 16 model years of Ford Edges between 2007 and 2024. Ignition and Tune-Up Products are bought most frequently for the following model years: 2023, 2022, 2024, 2021, 2020, 2018, 2017, 2016, and 2015.

What are the cheapest Ignition and Tune-Up Products for my 2019 Ford Edge?

The cheapest 2019 Ford Edge Ignition and Tune-Up Products we carry in stock are:

Double Platinum Spark Plug: Enhanced Durability & Performance (11469055) – $6.99
Door Trim Panel Retainer with Sealer – Triple Head Fits 9mm Hole – Ideal solution (50201697) – $7.29
DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (11333297) – $8.49
G-Power Platinum Spark Plug (LTR6GP-8): Enhanced Durability & Efficiency (12102028) – $9.49
Spark Plug (CYFS12YPT): Reliable Performance & Durability (12090773) – $9.79

What are the top-rated Ignition and Tune-Up Products that fit the 2019 Ford Edge?

Out of 546 reviews by customers, our 2019 Ford Edge Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 2019 Ford Edge and their top-rated products:

Spark Plugs
- Double Platinum Spark Plug: Enhanced Durability & Performance (11469055) – $6.99
- DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (11333297) – $8.49

What types of Ignition and Tune-Up Products do you sell for my 2019 Ford Edge?

As of 11/2/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 2019 Ford Edge:

Can I get help with 2019 Ford Edge Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Ignition and Tune-Up Products and more.

What is your return policy for Ford Edge Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Ford Edge Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2019 Ford Edge Ignition and Tune-Up Products

ACDelco – Double Platinum Spark Plug: Long-Lasting Performance & Durability (Part No.41-814)

NGK – OE Series Laser Platinum Spark Plug: Fine Wire Tip, PTR5A-13 (Part No.2467)

NGK – Iridium IX Spark Plug (LTR6IX-11): Extreme Ignitability & Durability (Part No.6509)

Autolite – Platinum Spark Plug: Enhanced Durability & Performance (Part No.AP5364)

NGK – Laser Platinum Spark Plug (LTR6BP13): Fine Wire Tip for High Ignitability (Part No.94806)

Motorcraft – Fine Wire Platinum Spark Plug: Enhances Durability & Reduces Misfires (Part No.SP-550)

Accel – HP Copper Spark Plug: Superior Heat Dissipation & Stronger Spark (Part No.578-6)

Carquest – Ignition Switch (Part No.CS804)

Motorcraft – Original Equipment (O.E.) Switch Assembly – Ignition (Part No.SW-6958)

Carquest Premium – Ignition Switch (Part No.CSC1044)

Carquest Premium – Ignition Switch (Part No.CSC4177)

Dorman – Door Trim Panel Retainer with Sealer – Triple Head Fits 9mm Hole – Ideal solution (Part No.963-139D)

Bosch – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.0221604700)

MSD Ignition – Coil;RED;Ford Eco-Bo (Part No.82606)

Carquest Premium – Ignition Coil (Part No.EBC1052)

NGK – Premium COP Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.48770)

Delphi – Ignition Coil (Part No.GN10621)

MSD Ignition – Coil; Ford EcoBoost (Part No.82594)

Accel – Coil:Ford 4.0L V6 2Pin Harness (Part No.140061)

Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-520)

DENSO – Direct Ignition Coil – Original Equipment Quality (Part No.673-6013)

MSD Ignition – Coil; Ford EcoBoost (Part No.825945)

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 6 Count (Part No.EBC1013-6)

Carquest Premium – Ignition Coil (Part No.EBC1336)

DENSO – Direct Ignition Coil – Original Equipment Quality (Part No.673-6203)

Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-563)

NGK – Premium COP Pencil Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.48856)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1013)

Carquest Premium – Ignition Coil (Part No.EBC1052)

NGK – Premium COP Type Ignition Coil: Meets or Exceeds OE Specifications (Part No.48770)

Carquest Premium – Ignition Switch (Part No.CSC1044)

Motorcraft – Original Equipment (O.E.) Switch Assembly – Ignition (Part No.SW-6958)

Dorman – Door Trim Panel Retainer with Sealer – Triple Head Fits 9mm Hole – Ideal solution (Part No.963-139D)

Autolite – Double Platinum Spark Plug: Enhanced Durability & Performance (Part No.APP5863)

E3 – DiamondFIRE Automotive Spark Plug: More Power, Saves Gas (Part No.E3.74)

ACDelco – Iridium Spark Plug: Reliable Cold Starts & Smooth Performance (Part No.41-988)

NGK – Ruthenium HX Spark Plug (LTR6BHX): High Ignitability & Durability (Part No.90495)

Motorcraft – Spark Plug (CYFS12YPT): Reliable Performance & Durability (Part No.SP-578)

NGK – Iridium IX Spark Plug (LTR6IX): Extreme Ignitability & Durability (Part No.94374)

Autolite Iridium – Iridium XP Fine wire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP5362)

NGK – G-Power Platinum Spark Plug (LTR6GP-8): Enhanced Durability & Efficiency (Part No.94372)

NGK – Laser Iridium Spark Plug (ILTR6R8G): Fine Wire Tip for Precision (Part No.91794)

Accel – HP Copper Spark Plug: Superior Heat Dissipation & Stronger Spark (Part No.578-6)

Motorcraft – Spark Plug: Enhanced Durability & Optimized Performance (Part No.SP-594)