2019 Chevrolet Silverado 2500 HD Exhaust System Kits

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade 304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Easy Bolt-On Installation
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

Interested in a new exhaust system for your L5P Duramax? Check out the ATLAS dual DPF-Back exhaust system by aFe. This system is constructed from 4″ mandrel-bent aluminized steel tubing and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations and comes with a bolt-on bracket that supports the driver side tailpipe. This provides for a quick, hassle-free installation with no modification necessary. Also included in this exhaust system are dual massive 6″ polished 304 stainless steel tips with laser-cut stainless steel aFe power badges. ATLAS exhaust systems are the perfect combination of performance, fit and value. Single To Dual Exhaust Conversion: This exhaust is designed to convert the standard single exhaust into an aggressive dual exhaust. Fits With Spare Tire: This exhaust system fits perfectly without relocating the spare tire. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: This ATLAS exhaust system is constructed of 4″ mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. Dual Massive 6″ Black Tips: Finishing off the exhaust are dual powder-coated high temp black 304 stainless steel exhaust tips. This tip features a laser-cut stainless steel aFe power badge for an aggressive style.

Product Features:

• Mandrel Bent Aluminized Steel Tubing
• High Quality Band Clamp
• OE Style Bayonet Hangers For Secure Fitment
• Factory Mounting Locations

Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are included for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance This exhaust system is constructed of 4″ mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. 5″ Diameter Polished Intercooled Tips: Finishing off the exhaust are 5″ diameter, polished, stainless steel straight cut tips with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style. **Cutting stock exhaust is required.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• High Quality Band Clamp
• OE Style Bayonet Hangers For Secure Fitment
• Factory Mounting Locations For A Quick Hassle Free Installation

The MagnaFlow PRO DPF Series 17870 utilizes it’s weight-optimized, durable, corrosion resistant stainless steel design to enhance your truck with MagnaFlow¿s signature sound and dyno-tested performance. 17870¿s 5in. diameter mandrel bent main piping features a muffler delete and terminates in a Single Passenger Side Rear exit with 6in. Polished Welded-Single Wall-Angle Cut-Rolled Edge-Intercooled tips. This emissions-legal filter-back exhaust kit has been tuned to create Mild interior and Moderate exterior sound levels. Exhaust system 17870 is emissions-legal and produced using CNC precision robotic manufacturing techniques that result in a direct-fit design that you can install yourself, all backed by MagnaFlow¿s limited lifetime warranty.

Product Features:

• Throaty, powerful performance sound Magnaflow is famous for
• Attention grabbing design thanks to an aggressive style
• Intercooled tips

Interested in a new exhaust system for your L5P Duramax? Check out the ATLAS dual DPF-Back exhaust system by aFe. This system is constructed from 4″ mandrel-bent aluminized steel tubing and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations and comes with a bolt-on bracket that supports the driver side tailpipe. This provides for a quick, hassle-free installation with no modification necessary. Also included in this exhaust system are dual massive 6″ polished 304 stainless steel tips with laser-cut stainless steel aFe power badges. ATLAS exhaust systems are the perfect combination of performance, fit and value. Single To Dual Exhaust Conversion: This exhaust is designed to convert the standard single exhaust into an aggressive dual exhaust. Fits With Spare Tire: This exhaust system fits perfectly without relocating the spare tire. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: This ATLAS exhaust system is constructed of 4″ mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. Polished Tips: Finishing off the exhaust are dual high luster, polished 304 stainless steel slash-cut tips. This tip features a laser-cut stainless steel aFe power badge for an aggressive style.

Product Features:

• Mandrel Bent Aluminized Steel Tubing
• High Quality Band Clamp
• OE Style Bayonet Hangers For Secure Fitment
• Factory Mounting Locations

Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are included for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance: This Large Bore-HD exhaust system is constructed of 5″ mandrel-bent 409 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s. 6″ Diameter Black Intercooled Tip: Finishing off the exhaust is a 6″ diameter, black, stainless steel slash cut tip with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style.

Product Features:

• Mandrel Bent 409 Stainless Steel Tubing
• High Quality Band Clamps
• OE Style Bayonet Hangers
• Factory Mounting Locations

Made of 100 Percent heavy Gauge aluminized steel our Installer Series is designed to provide the cost conscious consumer with the same high quality design and craftsmanship as our other systems, but at a value price. Installer Series is suitable for areas with moderate environmental conditions. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere, and also provided with the free exhaust tip with this Installer Series.

Product Features:

• The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
• Vehicle Maintains Optimal Operating Temperatures
• Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
• Made Of 100 Percent Heavy Gauge Aluminized Steel
• Designed To Provide The Cost Conscious Consumer With The Same High Quality Design And Craftsmanship
• Easy, Bolt-On Design, Makes Easy To Install