2019 Audi A5 Quattro Engine Parts

On certain Audi and Volkswagen vehicles equipped 2.0 liter engines, the mesh screen oil filter in the original equipment camshaft bridge cover tends to fail from the pressure of pulsations generated by the oil circuit. The pulsations can clog the filter with debris or cause the junction between the mesh screen and its plastic housing to fail and push the separated filter components into the engine lubrication system. Either condition starves the engine for oil, reduces engine power and can cause stalling, irregular idle, and a check engine light. The dealer only offers a replacement cover with the same failure-prone integrated oil filter or recommends removing the screen in the failed cover entirely. This Dorman OE FIX camshaft bridge cover features an upgraded one-piece stainless steel housing with a mesh screen laser-welded into place instead of the factory design’s plastic housing that holds the screen in place with a brass ring that can loosen and fall off. The screen mesh in our filter also has 3X the tensile strength and larger openings than the original equipment filter – small enough to capture damaging debris, while mitigating the harmful effects of oil pressure pulsations. This improved cover design is engineered to provide the protection specified Audi and Volkswagen engines need for peak performance and eliminate worries about costly damage from unfiltered contaminants and a factory-designed filter prone to breakage during normal engine operations..

Product Features:

• Better fix – this engine timing cover features a redesigned oil filter that resists clogging and breakage to better protect the engine from harmful oil pulsations and oil contaminants.
• Upgraded materials – the integrated filter is a one-piece stainless steel housing with the mesh screen laser-welded into place, rather than the factory’s multi-piece plastic design
• Fully tested – in hot oil immersion tests simulating extreme engine temperatures, the mesh screen in the upgraded filter tested to 3X the tensile strength of the original screen
• Ensures performance – engineered to help ensure optimal engine performance and component protection while reducing the potential for future failures

Timing Guide Rail

Timing Cover Gasket

Turbo Diverter Valve

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Rocker Arm

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool
• Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

Balance Shaft Chain

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Corteco Harmonic Balancers feature a stress-resistant rubber bond that withstands the damaging effects of heat, salt, ozone and general wear and tear. Corteco Harmonic Balancers undergo detailed dimensional checks of the full assembly and critical components to ensure the strength and integrity of the part.

Product Features:

• OE Quality
• Includes woodruff key, bolts, and washers for a complete repair (where applicable)
• Direct replacement to ensure proper fit

Water Pump O-Ring

Elring Intake Manifold Gaskets are engineered to meet the specific requirements of the installation site. Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring Intake Manifold Gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials.

Product Features:

• High-quality design and engineering for perfect performance
• Premium materials and high-precision curing processes for perfect shore hardness and superior reliability
• Majority of Elring valve cover gaskets sold as kits for improved convenience and efficient installation

Camshaft Follower

Camshaft Adjuster Ma

Crank Position Senso

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:

• Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
• Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
• Manufactured in an anti-static environment to ensure reliability and stability.
• Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
• Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

Rein Automotive OE quality oil caps fit European vehicles the way the original manufacturer intended. Designed to be direct replacement for the OE cap. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life.

Product Features:

• Prevents moisture and debris from entering and contaminating the system
• Direct fit
• Manufactured to strict engineering standards/specifications in materials and tolerances
• Produced by an original equipment supplier

Rein Automotive OE quality oil caps fit European vehicles the way the original manufacturer intended. Designed to be direct replacement for the OE cap. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life.

Product Features:

• Prevents moisture and debris from entering and contaminating the system
• Direct fit
• Manufactured to strict engineering standards/specifications in materials and tolerances
• Produced by an original equipment supplier

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

• Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
• Offers noise reduction and minimum dimensional tolerances for precise valve timing
• Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
• Timing marks are applied on the belt for proper installation

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

• Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
• Offers noise reduction and minimum dimensional tolerances for precise valve timing
• Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
• This belt has a round, reinforced tooth w/ grooved tip profile; designed to fit the timing sprockets precisely

Valve Keeper

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Established in 1972, Ajusa is a leading international manufacturer of automotive gaskets/sets, cylinder head bolt sets, and hydraulic lifters. Manufactured in Spain, Ajusa offers the world’s largest range of European and Asian applications and offers excellent coverage for European and Asian vehicles in the U.S. and Canadian marketplace. Ajusa’s extensive OE quality product line coupled with its dedication and proven track record in providing the customer with excellent service is right in line with the CRP Automotive mission and commitment to the marketplace.

Product Features:

• Manufactured from high quality materials
• Right fit the first time
• Direct replacement for the original component
• Vehicle specific application

Product Features:

• Brand may vary by location

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Crankshaft Pulley

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

• Designed as premium OEM replacement balancers for serpentine and V-belt drives
• Manufactured with ductile iron casting and injection bonded dampening rubber
• Engineered to offer superior bonding strength between the balancer rings

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

• Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
• Durable construction – stringent specifications and careful construction help ensure longevity
• Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience