2019 Acura ILX Cooling and Climate Controls

The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.

Product Features:

• OE-Equivalent and direct fit application.
• 100% new with no remanufactured parts.
• Advanced technological design.
• Carbon ceramic sealing.
• Resistant to corrosion.
• Optimum cooling performance and longevity.

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part..

Product Features:

• Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
• Ideal solution – engineered for a seamless installation
• Durable construction – manufactured from quality materials to withstand underhood heat and vibration
• Trustworthy design – backed by 100 years of automotive aftermarket experience

Carquest Premium Integrated Housing Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Product Features:

• Motors built and tested to OE specifications
• OE fit and design
• Out of box installation
• Wide selection of early/late model applications for domestic and import vehicles

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:

• Ideal for rigid cast aluminum parts
• Meets OEM Specifications
• Sensor safe & non-corrosive
• Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
• Blowout resistant, allowing leakproof gaskets to be made in just one minute
• Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
• Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
• Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
• Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part.

Product Features:

• Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles
• Complete package – assembly is designed with the same materials and components as the original part
• Quality assured – motors are tested in laboratory settings to ensure performance
• Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

• Maintains proper cooling system pressure
• Easy installation and removal
• 100% tested to ensure proper pressure and longevity
• Meets all OEM specifications

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

• Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
• Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
• Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
• Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

• All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
• Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
• All accumulators and receiver driers are helium leak tested prior to packaging.
• O-Rings necessary for installation are included.

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

• Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
• Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
• Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
• Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

• This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
• This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
• The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
• Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
• Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
• All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
• We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
• Our condensers are manufactured from rigid design standards to fit OEM dimensions.
• Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
• Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
• All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
• We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
• Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
• Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
• vibration testing
• blast testing
• and salt spray testing to simulate real world conditions.

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

New Platinum Pro A/C Condenser, With Receiver Drier, Includes Hybrid

Product Features:

• With Receiver Drier, Includes Hybrid, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

• Delphi temperature sensors deliver accurate readings and optimal performance
• Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
• Each sensor is electrically insulated to eliminate interference from other components in the vehicle
• Delphi temperature sensors are impervious to electrical noise and interference

Water Pump Gasket

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

• All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
• Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
• Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
• Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
• Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

• Thermal tested under real-life temperature simulations
• High tensile strength aluminum for maximum crimp strength
• Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
• Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
• Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
• OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

DENSO is a leading supplier of radiators to OE car makers around the world. Manufacturers rely on our quality and innovation to remain on the leading edge of engine cooling technology. Our OE experience and know-how ensure our products provide unmatched performance, reliability and fitment. Radiator performance is essential for proper engine cooling and function. DENSO’s radiator configurations, tanks, fin pitch, core dimensions and materials meet OE manufacturer’s rigid standards. All DENSO radiators pass our strict durability and function tests. As the result, our radiators deliver reliable performance even under the most demanding conditions. Radiator types: Plastic tank with aluminum core. Plastic tank with copper core. Cross-flow and down-flow configurations. DENSO is known for the unsurpassed quality of its products. Plastic, copper or aluminum components: it doesn’t matter. Our DENSO radiators are dependable, lightweight and made to last. An investment in a DENSO radiator will pay dividends in the long run. Radiators can fail causing leaks or inefficient cooling. This can lead to your engine to run hotter which in turn creates excess wear and tear on the engine. DENSO radiators are designed with our First Time Fit® philosophy in mind. You get radiators that drop in easily without the need for adjustment, brackets or modification of any kind. Our radiators are precision built to provide the right part, the right fit, the first time.

Product Features:

• Fin Pitch – Superior fin waves provide a higher heat transfer.
• Flow Configuration – Available in cross-flow and down-flow configurations.
• Aluminum or Copper Core – Thin-tube construction assures maximum cooling efficiency.

Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:

• Machined metal construction
• Works with MT-300 pressure tester
• Tests coolant caps
• Professional quality

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

• Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
• Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
• All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
• All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

HVAC Pressure Transd

Blower Motor

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor

High quality OE replacement part with all components needed to complete the job

Product Features:

• Endurance tested the equivalent of 50k miles
• Includes specific electrical connector to eliminate splicing
• Charged with lubricant to reduce internal friction promoting enhanced system performance and longevity
• For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, O-rings, or seals needed to repair your car
• Each unit is individually leak, vacuum and pressure tested prior to packaging to ensure leak free performance

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

• Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
• New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
• The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
• All new compressors must pass a helium leak test and pump up function test prior to packaging.
• O-Rings and gaskets necessary for installation are included.
• O-Rings and gaskets necessary for installation are included.