from

$41.49

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The Highest Quality Replacement Strut Mount Available
Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
Superior Rubber Reduces Noise, Vibration And Harshness
Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
Matched Grade Studs And Nuts

from

$195.99

ReadyLift(R) OEM style rear block kits are now available for model specific applications. Based on OEM designs and never made out of light weight extrusions our 2 Inch GMC Sierra or Chevy Silverado Rear Blocks are made from cast iron and have Anti-Rotation ears built-In. Fits classic and new body style 6-lug model GM trucks. New model 2007-UP 2WD and 4WD Trucks with OEM 1.25 Inch blocks will want to take advantage of the additional 1 Inch of lift for towing and hauling, particularly when using a front leveling kit. This block is 2.25 Inch which when removing the factory 1.25 Inch block, results in an increased rear lift of 1 Inch. ReadyLift(R) Block Kits will put a slight rake back in your Truck for hauling or towing and are designed to work in concert with your ReadyLift(R) Suspension Leveling Kit.

Product Features:

Made From Cast Iron/Not Light Weight Extrusions
Built In Locator Pin/Not Pressed In
Puts Rake Back In Your Truck For Towing/Hauling
Installation Time Is About An Hour

from

$51.99

Daystar Comfort Ride Suspension systems are truly Driven by Design. Comfort Ride kits are specially designed to work with stock suspension components to keep costs down and quality high. High-density Progressive Polyurethane strut and spring spacers act as isolators to combine moderate amounts of lift without losing the comfortable ride you have come to expect. In torsion bar applications, re-indexed torsion keys allow you to dial-in the desired amount of lift in order to plus-size tire and wheel packages. These front lifts are often combined with Daystar Greaseable Super Shackles, add-a-leafs, or blocks and u-bolts to provide complete front and rear kits. Daystar offers a the most complete line of kits for most of the popular vehicles, including virtually all late-model domestic and import applications Almost all of the lift and leveling kits used on strut applications feature an easy-install design, no disassembly of the strut is required Comfort Ride Kits are the perfect start to achieving that custom look without compromising performance, reliability, or affordability.

Product Features:

No Metal-On-Metal Contact, Daystar Uses Polyurethane Material In Its Leveling Kits For A Reason, It is An Insulator, Absorbs The Noise, Vibration And Harmonics (NVH) That Come From The Suspension
Maintains Factory Ride Quality, Daystar Products Work With The Factory Springs With No Preloading Involved, So Vehicle Will Ride Just Like It Did Off The Showroom Floor
Long Lasting Finish, Polyurethane Is Resistant To The Elements, Road Grime And All Automotive Chemicals, So Comfort Ride Kits Will Look Just Like They Came Out Of The Box For Years To Come
Top Mount Easy Install Design

from

$217.99

ReadyLift(R) OEM style rear block kits are now available for model specific applications. Based on OEM designs and never made out of light weight extrusions our 2 Inch GMC Sierra or Chevy Silverado Rear Blocks are made from cast iron and have Anti-Rotation ears built-In. Fits classic and new body style 6-lug model GM trucks. New model 2007-UP 2WD and 4WD Trucks with OEM 1.25 Inch blocks will want to take advantage of the additional 1 Inch of lift for towing and hauling, particularly when using a front leveling kit. This block is 2.25 Inch which when removing the factory 1.25 Inch block, results in an increased rear lift of 1 Inch. ReadyLift(R) Block Kits will put a slight rake back in your Truck for hauling or towing and are designed to work in concert with your ReadyLift(R) Suspension Leveling Kit.

Product Features:

Made From Cast Iron/Not Light Weight Extrusions
Built In Locator Pin/Not Pressed In
Puts Rake Back In Your Truck For Towing/Hauling
Installation Time Is About An Hour

from

$99.99

TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.

Product Features:

Fastest, Safest, Least Expensive Way To Bring The Front Of Your Vehicle Level With The Rear
Strut Extension Will Maintain A Smooth OEM Ride Without Adding Pressure To Stock Suspension Components
Toughest Finish. Safest Way To Level Lift
Smart Strut Technology Mounts On Top Of The Strut Assembly, Eliminating The Hassle, Time And Danger Of Compressing Springs
Installation Is Simple And Requires No Strut Preloading, Cutting, Or Modification Of Factory Installed Parts

from

$519.99

Ride-Rite(TM) air helper springs mount between the frame and the suspension of light trucks, vans, and motor homes. The heavy duty convoluted air springs will handle all leveling needs with load carrying capacities between 3,200 to 5,000 Pounds per set.

Product Features:

Level The Vehicle Front-To-Rear And Side-To-Side
Adjustability 5 To 100 PSI
Stabilize The Vehicle While Loaded
Maximize Vehicles Load Carrying Capacity
Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

from

$306.99

Timbren suspension enhancement system The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
Control Trailer Sway: A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
Control Body Roll: During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
Improve The Ride: By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesn’t Have To Mean Poor Ride Quality
Economical And Trouble Free
Simple And Easy To Install

from

$306.99

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
Economical And Trouble Free
Simple And Easy To Install

from

$487.99

Level out the front of your Toyota® Tacoma truck or 4Runner SUV by 2.25-in. with the LEVEL IT system from Rancho®. This leveling system features sway bar spacers and Rancho RS9000®XL struts for superior on-road comfort and off-road performance.

Product Features:

COMPATIBILITY — Designed for Toyota Tacoma trucks and 4Runner SUVs
LEVELED STANCE — Reduces factory rake and levels out truck’s stance by 2.25-in. (aftermarket bumpers, winches, etc. affect lift height)
COMPLETE SOLUTION — Kit includes two sway bar spacers, two Rancho RS9000®XL struts (coil springs not included) and mounting hardware to accommodate tires up to 33-in. (must use OE springs and top mounting components)
DELIVERS SUPERIOR PERFORMANCE — Rancho RS9000®XL struts with nine-position damping control for superior on-road comfort and off-road performance
ENHANCED CONTROL — Sway bar spacers correct end link angles for roll and sway control
EASY TO INSTALL — Bolt-on installation for an easy upgrade
COMPLETE PERFORMANCE UPGRADE FOR TACOMA– Transform your suspension with Rancho RS9000®XL rear shocks (RS999319), performance upper control arms (RS64901) and rear block kit (RS70901), all sold separately
COMPLETE PERFORMANCE UPGRADE FOR 4RUNNER — Transform your suspension with Rancho RS9000®XL rear shocks (RS999305), performance upper control arms (RS64903) and rear block kit (RS70080), all sold separately
NOTES — Allows the use of OE wheels/tires, must use OE springs and top mounting components, trimming required for 33-in. wheel/tire (tire size varies between manufacturers)

from

$14.49

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$14.99

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
Formulated to help prevent gear wear and protect against rust and corrosion
Formulated to deliver enhanced protection against deposits
Helps provide better protection during extreme operating conditions

from

$11.99

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Enhanced anti-shudder protection for smooth shifting and maximum power transfer
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$6.29

Max Performance Synthetic Power Steering Fluid

from

$796.99

aFe Control introduces these Sway-A-Way High Performance replacement shock absorbers for the 2005-2020 Toyota Tacoma.. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:

CNC Machined Components Made To The Strictest Tolerances
Polished Nitro Steel Shaft for Strength And Durability
Teflon Lined Steel Spherical Bearings
Multi-Seal Carrier To Ensure Zero Leakage

from

$39.99

Shock Kit

2018 Toyota Tacoma Air Suspension and Kits

More 2018 Toyota Tacoma Air Suspension and Kits

Essential 2018 Toyota Tacoma Air Suspension and Kits

KYB – Strut Mount, Insulator, Bushing and Washers (Part No.SM5640)

ReadyLift – 1 Inch Rear Lift, Cast Iron, Includes 2 Rear Blocks/4 U-Bolts And Hardware (Part No.66-5001)

Daystar – 1" Lift, Strut Assembly Spacer, With 2 Strut Spacers And All Necessary Hardware (Part No.KT09105BK)

ReadyLift – 2 Inch Rear Lift, Cast Iron, Includes 2 Rear Blocks/4 U-Bolts And Hardware (Part No.66-5002)

TrailFX – 2"Lift, Strut Assembly Extensions, With Strut Assembly Extensions/Hardware (Part No.T20LL1)

Firestone Ride-Rite – Air Spring, Frame Mount, 3200 To 5000 Pound Leveling Capacity (Part No.2304)

Timbren SES – Rubber Spring, Inside Coil Spring Mount, 14,000Lb, Aeon Hollow Rubber (Part No.TOFTUN4)

Timbren SES – Rubber Spring, Inside Coil Spring Mount, Aeon Hollow Rubber, With Helper Springs (Part No.TORTUN4L)

Rancho – Suspension Kit (Part No.RS66903R9)

Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)

Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)

aFe POWER – Sway-A-Way Shock Kit (Part No.102-0052-01)

Suncore – Shock Kit (Part No.2-12S254051-001)

Popular 2018 Toyota Tacoma Air Suspension and Kits Categories

2018 Toyota Tacoma Air Suspension and Kits

Air Suspension and Kits Brands To Make Your 2018 Toyota Tacoma Last

Popular Valvoline Air Suspension and Kits

FAQs for 2018 Toyota Tacoma Air Suspension and Kits

What are the most purchased Air Suspension and Kits for the 2018 Toyota Tacoma?

More Popular Parts for All Makes