2018 Toyota Land Cruiser Ignition and Tune-Up Products
More 2018 Toyota Land Cruiser Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 2018 Toyota Land Cruiser, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 2018 Toyota Land Cruiser Ignition and Tune-Up Products
NGK – Coil on Plug Boot (Part No.59009)
from
$7.99
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
NGK – Ignition Wire Set (Part No.F1020115939NGK)
from
$89.77
NGK Resistor Spark Plug Wire Sets utilize a construction method known as variable pitch wire winding to create resistance to radio frequency interference. The variable pitch winding (loose/tight/loose) provides suppression throughout a very wide range by scrambling and breaking up the electrical waves radiated by the firing of the spark plugs. A ferrite magnetic layer consisting of a mixture of rubber, plastic and powdered ferrite magnetic materials, offers uniform resistance and unsurpassed conductivity. NGK wires have a lower resistance than conventional carbon core wires (8k ohm/meter versus 16k ohm/meter). This comparison is important to remember when you consider that many manufacturers recommend wires be replaced when the resistance exceeds 20k ohm/meter. This does not leave much margin for wear when the wire may only meet original standards at the very early stages of its life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Superior Firing and Fuel Savings
- Outstanding Durability and Performance
- Excellent Noise Suppression
- Numbered for easy cylinder identification.
- High quality EPDM and Silicone coverings.
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1549)
from
$29.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest – Ignition Coil (Part No.E70)
from
$39.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Manufactured with copper windings and permanent magnets to ensure strong signal emission and improved performance
- High temperature enameled wires were specified for better insulation and performance
- A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
- As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)
from
$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1028)
from
$31.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Champion – Double Platinum & Power Spark Plug Exceptional Perf OE Replacement REC10PYPB4 (Part No.7975)
from
$7.99
Champion® Double Platinum Power¿ spark plugs deliver more powerful performance. Featuring exclusive Heat-Active¿ alloy, platinum fine wire center electrode and platinum pad ground electrode provide maximum life and sharper spark focus.
Product Features:
See More
Product Features:
- Double Platinum Power – Premium Spark Plug. More Powerful Performance.
- Platinum center and ground electrode for greater wear resistance
- Maintains stable operating temperature under all engine loads
- Fine-wire center electrode for greater ignitability
- V-trimmed ground electrode promotes sharper spark focus
- Heat-Active┐ alloy allows electrodes to reach optimal temperature
DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IKH20TT (Part No.4704)
from
$10.99
Durability of an OE style plug combined with Power & Torque of high performance.
Product Features:
See More
Product Features:
- 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
- 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
- DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
- DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
- Durability of an OE style plug combined with Power & Torque of high performance.
- Withstands temperatures greater than 4000° Fahrenheit
- Iridium TT
Champion – Iridium Spark Plug: Maximum Performance, OE Replacement, REC10WMPB4 (Part No.9775)
from
$10.99
Champion® Iridium – the ultimate element. This spark plug’s fine-wire iridium center and platinum ground electrodes provide the sharpest spark focus for maximum performance.
Product Features:
See More
Product Features:
- Fine-wire iridium center electrode laser-locked to center electrode
- Platinum ground to ensure high performance and long life
- Maintains stable operating temperature under all engine loads
- Greatest engine performance regardless of engine type or ignition system
DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IW16TT (Part No.4708)
from
$10.99
Durability of an OE style plug combined with Power & Torque of high performance.
Product Features:
See More
Product Features:
- 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
- 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
- DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
- DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
- Durability of an OE style plug combined with Power & Torque of high performance.
- Withstands temperatures greater than 4000┬░ Fahrenheit
- Iridium TT
- Enhanced Fuel Economy and Lower Emissions: Drive around the Earth over 4 times with improved fuel efficiency and reduced emissions.
- Reliable and Durable: The flat seat type design ensures a secure fit and consistent performance throughout its lifespan.
Encore Automotive – Genuine OE Ignition Knock (Detonation) Sensor (Part No.SKS-J50006)
from
$147.99
Encore Automotive Genuine OE knock sensor detects excessive/unusual pulses caused by the engine ignition and makes proper adjustments to reduce the risk of damaging pistons. Encore Automotive is dedicated to bringing the latest original equipment technologies to the Aftermarket to provide the highest overall value.
Product Features:
See More
Product Features:
- Genuine OE Part
- Highly accurate engine vibration detection
- Excellent material quality
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3674)
from
$181.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
NTK – Ignition Knock (Detonation) Sensor (Part No.ID0215)
from
$119.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
- NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
- The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA4133)
from
$165.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better
Carquest Premium – Ignition Switch (Part No.CSC4411)
from
$611.99
Ignition Switch
Carquest Premium – Ignition Switch (Part No.CSC4263)
from
$351.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
MAHLE Original – Spark Plug Tube Seal (Part No.B31693)
from
$22.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Nippon Reinz – Spark Plug tube Seal (Part No.A8027168107NRZ)
from
$4.49
Nippon Reinz Spark Plug tube Seal withstands high and low temperatures to provide a reliable seal with minimal tightening. Spark Plug tube Seals are increasingly produced with profiles and not flat; that is, the gasket surface is provided with beads or lips. Now, instead of the entire gasket surface, only the profile needs to be pressed, that is, the sealing bead or sealing lip, and just a slight amount of bolting force produces sufficient deformation and adaptation.
Product Features:
See More
Product Features:
- Stays cool at temperature up to 1800F
- Designed to seal minor surface irregularities
- No re-torque required
- Teflon® coating optional
Felpro – Spark Plug Tube Seal Set (Part No.ES 73110)
from
$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Idemitsu – Power Steering Fluid – 12 oz (Part No.30102-052A)
from
$6.29
IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.
Product Features:
See More
Product Features:
- Unique friction technology provides efficient and noise-free operation
- Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
- Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
- Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
- Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life
Popular 2018 Toyota Land Cruiser Ignition and Tune-Up Products Categories
2018 Toyota Land Cruiser Ignition and Tune-Up Products
You count on your 2018 Toyota Land Cruiser to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 33 Ignition and Tune-Up Products ranging in price from $2.29 to $351.99, you’re sure to find everything you need for your 2018 Toyota Land Cruiser.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 14 different brands like Autolite, DENSO, and NGK. 2018 Toyota Land Cruiser Ignition and Tune-Up Products start as low as $2.29!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 763 extensive product reviews on 2018 Toyota Land Cruiser Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IKH20 with 4.7 stars and Original Equipment Quality Direct Ignition Coil with 4.8 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2018 Toyota Land Cruiser below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 2018 Toyota Land Cruiser
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2018 Toyota Land Cruiser running right for years to come. In our inventory you’ll find brands like Autolite, DENSO, NGK, and even more.
Popular Champion Ignition and Tune-Up Products
You’ll find popular Champion brand products across Spark Plugs. All are waiting to get your 2018 Toyota Land Cruiser back on the road. Some of the top-rated Champion products in these categories are:
from
$7.99
(2)
Double Platinum & Power Spark Plug Exceptional Perf OE Replacement REC10PYPB4
Spark Plugs
Top-Rated Autolite Ignition and Tune-Up Products
If Autolite are what you’re looking for, our inventory holds plenty. We stock Autolite brand Ignition and Tune-Up Products for your 2018 Toyota Land Cruiser, and some of our most reviewed Autolite parts include:
from
$9.99
(166)
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
from
$4.79
(131)
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
Spark Plugs
from
$6.79
(87)
Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life
Spark Plugs
FAQs for 2018 Toyota Land Cruiser Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 2018 Toyota Land Cruiser?
Out of 33 Ignition and Tune-Up Products for the 2018 Toyota Land Cruiser, the most popular in our inventory are:
from
$11.49
(104)
Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK20HR11
Spark Plugs
What are the top-rated 2018 Toyota Land Cruiser Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 2018 Toyota Land Cruiser based on customer reviews/ratings are:
from
$12.29
(76)
Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IKH20
“Best plugs I used and already pre gaped
Awesome”
from
$141.99
(18)
Original Equipment Quality Direct Ignition Coil
“I had a misfire in cylinder 5, read the codes and it was a failing coil. Decided to replace all coils and plugs. This was on a 2009 RX350, be sure to ”
from
$10.99
(16)
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IKH20TT
“Vehicle”
