2018 Ram 3500 Clutch Systems

The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:

• Extended service life
• Compact, lightweight design
• Sealed for life with high performance, application-specific grease
• Simplified assembly
• Integrated functionality
• Design flexibility

Dual Mass Flywheels (DMF) are made up of many components and are not meant to be re-surfaced or re-ground. When they are worn out, they will slip, sometimes confused with clutch slippage. Please call our tech line on how to identify a worn out dual mass flywheel.

Product Features:

• All components are closely matched as an assembly to ensure maximum dampening
• Extends transmission gear life by absorbing drive train vibrations
• New ring gear ensures positive starter engagement
• Engineered to properly fit the intended application with no modifications

LuK dual-mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual-mass flywheels cannot be resurfaced. This all makes the LuK dual mass flywheel the ideal solution. With one drawback: the higher the mass reactance of the vibrating masses, the more excessive the resonance increase and associated torque peaks. With the dual mass flywheel, this would be easily perceived when starting and stopping the engine; much more easily than with a conventional clutch system. Additionally: the smaller flymass of the engine has less of a stabilizing effect on the speed fluctuation of the engine. Thanks to decades of experience in clutch building, the LuK specialists were able to find an excellent solution to this problem. An additional damping device effectively prevents resonance overload. In normal operation, however, this additional damping device has no function and the torsional vibrations of the engine are filtered out by spring dampers. Friction and spring rate – the correct ratio is important. For optimal vibration isolation and soft resonance passage when starting and stopping the engine, the ratio between friction and spring rate must be optimal. The length of the springs is a key factor: The softer a spring, the more efficiently vibrations are isolated. The extra-long springs of the latest generation of dual mass flywheels significantly reduce the spring rate compared to a first generation dual mass flywheel. In routine driving operations, excessive resonance increases are kept almost completely away from the gearbox.

Product Features:

• Top driving comfort
• Absorbs vibrations
• Prevents noise
• Enables comfortable, low-revs driving
• Saves fuel
• Relieves crankshaft and gearbox

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to

LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.

New Perfection Clutch Sets include the following: New OEM-style cover assembly, computer-tested for clamp load, plate lift, and finger height; new OEM-style clutch disc with facings built to exceed OEM specifications; new clutch release bearing meeting or exceeding OEM specifications (where supplied); new pilot bearing/bushing (where used); alignment tool for the perfect clutch installation (where available); hydraulic line disconnect tool (where used).

Product Features:

• New clutch disc with non-asbestos facings built to exceed OEM specifications for durability, safety, and positive engagement.
• Cover assembly is computer tested for clamp load, plate lift and finger height to ensure uniform and smooth operation
• Alignment tool included where available to ensure professional installation
• Where required, includes new pilot bearing or bushing to complete the job

New Perfection Clutch Sets include the following: New OEM-style cover assembly, computer-tested for clamp load, plate lift, and finger height; new OEM-style clutch disc with facings built to exceed OEM specifications; new clutch release bearing meeting or exceeding OEM specifications (where supplied); new pilot bearing/bushing (where used); alignment tool for the perfect clutch installation (where available); hydraulic line disconnect tool (where used).

Product Features:

• New clutch disc with non-asbestos facings built to exceed OEM specifications for durability, safety, and positive engagement.
• Cover assembly is computer tested for clamp load, plate lift and finger height to ensure uniform and smooth operation
• Alignment tool included where available to ensure professional installation
• Where required, includes new pilot bearing or bushing to complete the job

Voted #1 recommended Clutch products by installers since 2015. Luk, a Schaeffler brand pioneered the way from the conventional and self-adjusting clutch to the innovative double clutch. We carry a comprehensive product portfolio of complete clutch sets, pressure plates, discs, flywheels, slave and master cylinders and release bearings, The Luk product range also includes a large number of available single components, dampers and absorbers and hydraulic clutch lines.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

Voted #1 recommended Clutch products by installers since 2015. Luk, a Schaeffler brand pioneered the way from the conventional and self-adjusting clutch to the innovative double clutch. We carry a comprehensive product portfolio of complete clutch sets, pressure plates, discs, flywheels, slave and master cylinders and release bearings, The Luk product range also includes a large number of available single components, dampers and absorbers and hydraulic clutch lines.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

• Application matched for OE form, fit, and function
• Manufactured with high-quality materials, using cutting edge technology and processes
• Stock photo – Actual parts and materials may vary.

Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability.

Product Features:

• Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
• Each unit includes vehicle-specific bulletins for accurate installation
• Online videos show step-by-step installation and bleeding procedures
• Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels

The Sachs Clutch Master and Slave Cylinder Assembly saves time, money and labor. The Sachs master/slave cylinder assembly is a direct OE replacement, providing an additional layer of ease and convenience.

Product Features:

• OE Quality
• Durably constructed of reinforced nylon, cast iron or aluminum for a long service life
• Contains high quality EPDM rubber components for compatibility with brake fluid
• Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

Clutch Lever