2018 Ram 2500 Differentials

Essential 2018 Ram 2500 Differentials

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

Driveworks – Cylindrical Bearing (Part No.S-R1561TV)

Cylindrical Bearing

from

$31.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Bearing Install Kit For ’11 & Up Chrysler 9.25" Zf Rear (Part No.11125)

Bearing Install Kit For '11 & Up Chrysler 9.25" Zf Rear

from

$374.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits 2011 and up Chrysler 9.25″ ZF rear axles
  • Included are Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve , thread locker, marking compound and brush.
See More

National – Bearings (Part No.28622)

Bearings

from

$17.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Steel Cover For Chrysler & GM 11.5", With O Fill Plug (Part No.32330)

Steel Cover For Chrysler & GM 11.5", With O Fill Plug

from

$146.99
Product Features:
  • Fits GM and Chrysler 11.5″
  • Steel
See More

Yukon Gear – Standard Open Carrier Case, Chrysler 11.5" (Part No.20001)

Standard Open Carrier Case, Chrysler 11.5"

from

$749.99
11.5″ Chrysler standard Open carrier case, loaded with spiders.

Product Features:
  • Standard open carrier case
  • Includes spider gears
  • Fits Chrysler and GM 11.5″
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

Tapered Roller Bearing

from

$16.99
Product Features:
  • Brand may vary by location
See More

Motive Gear – Differential Gear Install Kit (Part No.C11.5IK)

Differential Gear Install Kit

from

$97.99
Product Features:
  • INSTALL KIT-CHRYSTLER 11.5″
See More

Yukon Gear – 2007 & Up 9.25" Chrysler Standard Open 33 Spline Straight Axle Front Spider Set (Part No.16067)

2007 & Up 9.25" Chrysler Standard Open 33 Spline Straight Axle Front Spider Set

from

$409.99
2007 & Up 9.25″ Chrysler standard Open 33 spline straight axle front spider set (not rear). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits 2007 and up Chrysler 9.25″ front open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Pro-King – Crush Sleeve (Part No.724A034)

Crush Sleeve

from

$11.29
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

National – Bearings (Part No.HM807010)

Bearings

from

$27.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Pro-King – Differential Ring and Pinion (Part No.745A730A)

Differential Ring and Pinion

from

$938.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – 11.5" Chrysler & GM Helical Gear Type Positraction (Part No.32244)

11.5" Chrysler & GM Helical Gear Type Positraction

from

$1806.99
11.5″ Chrysler Helical gear Type positraction.

Product Features:
  • Fits GM and Chrysler 11.5″
  • 30 spline
See More

Yukon Gear – Axle For 03 & Up Chrysler 10.5Aam/ 11.5Aam, 30Spline (Part No.21435)

Axle For 03 & Up Chrysler 10.5Aam/ 11.5Aam, 30Spline

from

$299.99
Cut to length axle for 10.5″ & 11.5″ Dodge rear. This cut to length axle will accomodate applications from 36.4″ to 40.1″. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler 10.5″ and 11.5″ rear
  • 30 spline
  • Cut to length design fits 36.4″-40.1″ applications
  • 8 x 3.562″ bolt pattern
See More

Felpro – Differential Cover Gasket (Part No.RDS 55473)

Differential Cover Gasket

from

$72.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Pinion Nut (Part No.33142)

Pinion Nut

from

$10.99
Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

Product Features:
  • Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
  • 7/8″ x 14 thread
See More

Yukon Gear – Differential Pinion (Part No.30356)

Differential Pinion

from

$45.99
Differential Pinion

National – Pinion Seal (Part No.711076)

Pinion Seal

from

$43.99
Pinion Seal

Yukon Gear – Pinion Install Kit For ’03 And Newer Chrysler Dodge Truck 9.25" Front Differential (Part No.13094)

Pinion Install Kit For '03 And Newer Chrysler Dodge Truck 9.25" Front Differential

from

$284.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Chrysler 9.25″ front
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Pinion Install Kit For 2011 & Up GM & Chrysler 11.5" Differential (Part No.13103)

Pinion Install Kit For 2011 & Up GM & Chrysler 11.5" Differential

from

$462.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 2011 and up GM and Chrysler 11.5″
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

USA Standard Gear – Master Overhaul Kit for the Chrysler 9.25" Front Differential (Part No.37083)

Master Overhaul Kit for the Chrysler 9.25" Front Differential

from

$399.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Chrysler 9.25″ front
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

USA Standard Gear – Master Overhaul Kit for Mid 2011 & Up GM & Chrysler 11.5" AAM Differential (Part No.37074)

Master Overhaul Kit for Mid 2011 & Up GM & Chrysler 11.5" AAM Differential

from

$604.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 2011 and up GM and Chrysler 11.5″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Bearing Race Driver (Part No.56012)

Bearing Race Driver

from

$215.99
Bearing race driver for rear GM 9.5″, 9.25″ IFS, and Ford 9″ HD. (TK HM804810). No return.

Product Features:
  • Bearing race driver
  • Fits HM804810 race
  • All steel construction
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

Yukon Gear – DiffrPinionYoke (Part No.41222)

DiffrPinionYoke

from

$187.99
DiffrPinionYoke

Yukon Gear – Dura Grip For GM & Chrysler 11.5", 30 Spline (Part No.26033)

Dura Grip For GM & Chrysler 11.5", 30 Spline

from

$1485.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM and Chrysler 11.5″ with 30 spline axles
  • Clutch style positraction
  • Smooth design
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

2018 Ram 2500 Differentials

Maybe you’re in the middle of a full rebuild of that 2018 Ram 2500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 68 different Differentials in our inventory ranging from $2.99 to $1,806.99. That means you can find the exact parts or products you need to keep that 2018 Ram 2500 running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 2018 Ram 2500. Royal Purple, Valvoline, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2018 Ram 2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 1,449 reviews in this category, some of the top rated parts include Bearings with 3.9 stars and Taper Bearing Set with 2.5 stars.

So if you’re in the market for aftermarket Differentials to keep your 2018 Ram 2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2018 Ram 2500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2018 Ram 2500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your 2500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Dorman Differentials

We carry Dorman parts in our stock across Differential Covers categories, plus more. For a 2018 Ram 2500, our most popular Dorman Differentials include:
Rear Differential Cover
from $77.99
(2)
Rear Differential Cover
Differential Covers

FAQs for 2018 Ram 2500 Differentials

What are the most purchased Differentials for the 2018 Ram 2500?

Out of 68 Differentials for the 2018 Ram 2500, the most popular in our inventory are:
DEX/MERC Automatic Transmission Fluid, 1 Gallon
from $35.99
(17)
DEX/MERC Automatic Transmission Fluid, 1 Gallon
Differential Oil
Transfer Case Fluid, 1 Quart
from $14.99
(36)
Transfer Case Fluid, 1 Quart
Differential Oil
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil

What are the top-rated 2018 Ram 2500 Differentials?

Top-rated Differentials for your 2018 Ram 2500 based on customer reviews/ratings are:
Bearings
from $23.99
(7)
Bearings
“Good price”
Taper Bearing Set
from $13.79
(4)
Taper Bearing Set
“Worked great on my 1981 Chevy C20”
Bearings
from $39.49
(2)
Bearings
“I have a 2002 Saturn SL Series and this part doesn’t fit in my car when the site says exact fit. For my car the back needs a full assembly and the fro”