2016 Ram 2500 Differentials

Find your specific 2016 Ram 2500 original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 2016 Ram 2500 Differentials

from

$244.99

Yukon serrated pinion flange for 9.25″ AAM front, Dodge Ram trucks. Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 9.25″ front
29 spline

from

$19.99

We’ve squeezed innovation into every ounce of Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil, the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Our unique new flexible pouch makes getting into the tightest places to lubricate gears easier than ever and with less waste. The superior detergent package-based formulation contains fully synthetic basestocks and special additives that help protect parts from rust and corrosion while providing exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity, wear resistance additives that assist in protecting gear teeth, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. Valvoline FlexFill SAE 75W-140 Full Synthetic Gear Oil is recommended for use in axle applications requiring factory-fill or drain-and-fill levels for limited slip performance.

Product Features:

FLEXIBLE POUCH FOR EASIER USE WITH LESS WASTE in tight, hard to reach undercarriage situations
EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -30F to 300F degrees for dependable coverage year-round
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5

from

$13.99

Crush Sleeve for Chrysler 9.25″ front, GM 8.6″ IRS, 9.25″ IFS & 9.5″. Approx 0.640″ long.

Product Features:

Crush sleeve for Chrysler 9.25″ front, GM 8.6″ IRS, 9.25″ IFS and 9.5″
0.640″ tall

from

$27.49

Product Features:

Brand may vary by location

from

$31.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$23.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$12.99

GM 9.5″ ring gear bolt. 12mm x 1.5.

Product Features:

Ring gear bolt for GM 9.2″
12mm x 1.5

from

$1806.99

11.5″ Chrysler Helical gear Type positraction.

Product Features:

Fits GM and Chrysler 11.5″
30 spline

from

$215.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits HM88610 race
All steel construction

from

$409.99

2007 & Up 9.25″ Chrysler standard Open 33 spline straight axle front spider set (not rear). Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fits 2007 and up Chrysler 9.25″ front open differential
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$72.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$889.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits GM and Chrysler 11.5″
11.50″ ring gear diameter
30 spline pinion
12 ring gear bolts
4.44 ratio

from

$1485.00

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:

Fits GM and Chrysler 11.5″ with 30 spline axles
Clutch style positraction
Smooth design
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$10.99

Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

Product Features:

Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
7/8″ x 14 thread

from

$146.99

Product Features:

Fits GM and Chrysler 11.5″
Steel

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$809.99

Differential Parts K

from

$454.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits Chrysler 9.25″ front
Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.

from

$97.99

Product Features:

INSTALL KIT-CHRYSTLER 11.5″

from

$279.99

Chrysler 10.5″ standard Open carrier case (bare).

Product Features:

Standard open carrier case
Does not include spider gears
Fits Chrysler 10.5″

from

$319.99

38 spline upgraded cut to length axle for 10.5″ & 11.5″ Dodge rear. This cut to length axle will accomodate applications from 36.4″ to 40.1″. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects. The factory spindles will need to be machined in order to accept these axles.

Product Features:

38 spline
Cut to length design fits 36.4″-40.1″ applications
Fits Chrysler 11.5″

from

$299.99

Cut to length axle for 10.5″ & 11.5″ Dodge rear. This cut to length axle will accomodate applications from 36.4″ to 40.1″. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 10.5″ and 11.5″ rear
30 spline
Cut to length design fits 36.4″-40.1″ applications
8 x 3.562″ bolt pattern

from

$284.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Chrysler 9.25″ front
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$759.99

Differential Pinion

from

$44.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$57.01

PINION SEAL

from

$187.99

DiffrPinionYoke

Popular 2016 Ram 2500 Differentials Categories

Differential Oil

Differential Open Unit and Components

Differential Covers

Differential Bearings

Differential Pinion Flanges

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Ring and Pinions

Differential End Yokes

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Limited Slip Differential Assemblies

Maybe you’re in the middle of a full rebuild of that 2016 Ram 2500. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 89 different Differentials in our inventory ranging from $2.99 to $1,806.99. That means you can find the exact parts or products you need to keep that 2016 Ram 2500 running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 2016 Ram 2500. Royal Purple, Valvoline, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2016 Ram 2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,261 reviews in this category, some of the top rated parts include Bearings with 3.9 stars and Taper Bearing Set with 2.5 stars.

So if you’re in the market for aftermarket Differentials to keep your 2016 Ram 2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2016 Ram 2500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2016 Ram 2500 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your 2500 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Dorman Differentials

We carry Dorman parts in our stock across Differential Covers categories, plus more. For a 2016 Ram 2500, our most popular Dorman Differentials include:

from $77.99

(2)

Rear Differential Cover

Differential Covers

Top 2016 Ram 2500 Differentials from Royal Purple

Royal Purple products are another trusted brand when it comes to Differentials for your 2016 Ram 2500. Popular Royal Purple parts include:

from $12.99

(82)

High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT

Differential Oil

FAQs for 2016 Ram 2500 Differentials

What are the most purchased Differentials for the 2016 Ram 2500?

Out of 89 Differentials for the 2016 Ram 2500, the most popular in our inventory are:

from $35.99

(17)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

Differential Oil

from $14.99

(36)

Transfer Case Fluid, 1 Quart

Differential Oil

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

What are the top-rated 2016 Ram 2500 Differentials?

Top-rated Differentials for your 2016 Ram 2500 based on customer reviews/ratings are:

from $23.99

(7)

Bearings

“Good price”

from $13.79

(4)

Taper Bearing Set

“Worked great on my 1981 Chevy C20”

from $16.99

(2)

Tapered Cone Wheel Bearing Assembly

“Worked sell”

2016 Ram 2500 Differentials

More 2016 Ram 2500 Differentials

Essential 2016 Ram 2500 Differentials

Yukon Gear – Serrated Pinion Yoke For 9.25" Aam Front, Dodge Truck (Part No.41117)

Valvoline – Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart (Part No.889787)

Yukon Gear – Crush Sleeve (Part No.33099)

Driveworks – Tapered Roller Bearing (Part No.S-A-42)

Driveworks – Cylindrical Bearing (Part No.S-R1561TV)

National – Bearings (Part No.M802048)

Yukon Gear – GM 9.5" Ring Gear Bolt (Part No.33047)

Yukon Gear – 11.5" Chrysler & GM Helical Gear Type Positraction (Part No.32244)

Yukon Gear – Bearing Race Driver (Part No.56015)

Yukon Gear – 2007 & Up 9.25" Chrysler Standard Open 33 Spline Straight Axle Front Spider Set (Part No.16067)

Felpro – Differential Cover Gasket (Part No.RDS 55473)

Yukon Gear – High Performance Ring & Pinion Gear Set For GM 11.5" In A 4.44 Ratio (Part No.24604)

Yukon Gear – Dura Grip For GM & Chrysler 11.5", 30 Spline (Part No.26033)

Yukon Gear – Pinion Nut (Part No.33142)

Yukon Gear – Steel Cover For Chrysler & GM 11.5", With O Fill Plug (Part No.32330)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Differential Parts K (Part No.14219)

Yukon Gear – Bearing Install Kit For ’03 And Newer Chrysler 9.25" Differential For Dodge Truck (Part No.11096)

Motive Gear – Differential Gear Install Kit (Part No.C11.5IK)

Yukon Gear – Standard Open Carrier Case, Chrysler 10.5" (Part No.20000)

Yukon Gear – Axle For 03 & Up Chrysler 10.5/ 11.5Aam, 38Spline (Part No.21436)

Yukon Gear – Axle For 03 & Up Chrysler 10.5Aam/ 11.5Aam, 30Spline (Part No.21435)

Yukon Gear – Pinion Install Kit For ’03 And Newer Chrysler Dodge Truck 9.25" Front Differential (Part No.13094)

Yukon Gear – Differential Pinion (Part No.13114)

National – Multi Purpose Seal (Part No.710508)

SKF – PINION SEAL (Part No.J7010218383SKF)

Yukon Gear – DiffrPinionYoke (Part No.41222)

Popular 2016 Ram 2500 Differentials Categories