2018 Nissan Altima Camshafts

The Crankshaft or Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position or speed of the crankshaft or camshaft to the ECM. The ECM then uses this information to determine fuel and spark timing. A failed sensor can result in a check engine light, failure to start, intermittent stalling or misfire. NTK Crankshaft or Camshaft Position Sensors are premium quality products with outstanding support and leading innovation bred from our OE heritage.

Product Features:

• THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
• OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function ensures proper position, rotating speed of the camshaft or crankshaft
• EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
• PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output

DENSO’s Camshaft Position Sensors are manufactured to the stricktest OE standards resulting in unsurpassed reliability, durability, and detection accuracy.

Product Features:

• Innovative MRE sensor design uses a pair of MREs on an Integrated Circuit (IC) chip for extreme accuracy
• Molded IC chip located inside the cylindrical magnet is positioned closer to the gears
• Polyphenylene sulfide resin coating resists damage from engine oil, fuel and emission byproducts

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• 100% testing to meet OE performance
• High temperature resistance for longer life

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• 100% testing to meet OE performance
• High temperature resistance for longer life

Hitachi’s Camshaft Position Sensors (CPS) accurately signals to your vehicles’ Electrical Control Unit (ECU) the position of your engine’s camshaft. Designed to meet the exact needs of each specific vehicle, Hitachi’s Camshaft Position Sensors are the premium choice.

Product Features:

• Hitachi is a Tier 1 OE supplier for camshaft position sensors
• Meets the OE performance and durability standards for this application
• Accurate and reliable measurements
• Accurate and reliable measurements

Delphi Digital Speed and Position Sensors are based on integrated adaptive threshold Hall effect technology. They sense the speed and position of a target created with various sense features that are machined, stamped, drawn, or magnetically encoded. They can sense speeds as low as zero RPM. Delphi Speed and Position Sensors feature silicon Hall sense elements. The sensor assembly uses proven design features and assembly processes to provide a reliable solution in demanding automotive environments. The sensor design is modular to enable re-use of proven components and to provide low risk package modifications for new applications. They utilize an adaptive threshold control scheme providing robust performance that improves the air gap capability and reduces the placement accuracy requirements between the sensor and the target. Delphi also offers designs that help protect the sensor from transients and from electromagnetic interference (EMI). Power can be provided by either battery or regulated voltage supplies, enabling even more controller flexibility. Delphi’s Digital Speed and Position Sensors can operate on conditioned voltage from 4.5 to 16 volts.

Product Features:

• Modular design based on proven features and assembly processes provides rapid application optimization with flexible package geometry and high reliability
• Three-wire open collector output, open drain output, or two-wire current output allow flexible controller design
• Accurate square wave output eliminates square-up function in the controller
• Transient protection helps protect against stray electro-magnetic fields interface
• Various mounting applications provide choice of many existing designs, or custom designs
• Adaptive Hall signal schemes provide improved timing accuracy, optimized sensor air gap and tilt sensitivity, and zero speed sensing capability
• Single element option offers simplified design, and valid power on state (VPOS) for camshaft applications to minimize engine synchronization timing
• Dual element differential option offers extremely accurate gear edge detection, peak detector circuitry that is immune to tilt or off-center failure mode, and gain-adjust circuitry that reduces the effect of minor gear anomalies
• Enhanced sensing capability helps reduce emissions and improve reliability and drivability

Hitachi’s Camshaft/Crankshaft Position Sensors (CPS) accurately signals to your vehicles’ Electrical Control Unit (ECU) the position of your engine’s camshaft or the position and RMP of your engine’s crankshaft. Designed to meet the exact needs of each specific vehicle, Hitachi’s Camshaft/Crankshaft Position Sensors are the premium choice.

Product Features:

• Hitachi is a Tier 1 OE supplier for camshaft/crankshaft position sensors
• Meets the OE performance and durability standards for this application
• Accurate and reliable measurements
• Accurate and reliable measurements

DENSO’s camshaft position sensors are manufactured to the strictest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s camshaft position sensors offer leading edge sensing technology which helps control ignition timing more precisely.

Product Features:

• OE technology adapted for the aftermarket
• Reduces emissions, increased performance
• Delivers the highest reliability and detection accuracy

Hitachi’s Camshaft/Crankshaft Position Sensors (CPS) accurately signals to your vehicles’ Electrical Control Unit (ECU) the position of your engine’s camshaft or the position and RMP of your engine’s crankshaft. Designed to meet the exact needs of each specific vehicle, Hitachi’s Camshaft/Crankshaft Position Sensors are the premium choice.

Product Features:

• Hitachi is a Tier 1 OE supplier for camshaft/crankshaft position sensors
• Meets the OE performance and durability standards for this application
• Accurate and reliable measurements
• Accurate and reliable measurements

The Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. NTK Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

• THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
• OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
• EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
• PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output

The Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. NTK Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

• THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
• OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
• EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
• PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

• Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
• Manufactured in an anti-static environment to ensure reliability and stability.
• Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
• Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

Engine Camshaft Position Sensor

Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:

• Delphi products are manufactured in a Delphi ISO certified facility
• Designed digital output for maximum signal to noise ratio
• All parts used in the manufacture process are Delphi validated
• Not impacted by temperature changes and provide robust, long-lasting sensor protection

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Product Features:

• Brand may vary by location

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool
• Installation tool reduces sleeve distortion and allows for installation without removal from the shaft