2018 Lexus LX570 Steering and Chassis Parts

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• Hardened ball stud made of OE equivalent or better materials to withstand higher loads
• Easy to install.
• Construction and design validated by MOOG engineers
• Premium forged housing with increased cross section of up to 52% more material in key areas
• Broad coverage for foreign and domestic applications
• Designed to meet or exceed original equipment performance

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Heat treated components
• Dust seal to prevent contamination
• Restores vehicle handling
• Restores OE alignment

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

• Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
• Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
• Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed – additional coatings offer long-lasting rust and corrosion resistance

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

• Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
• Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
• Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed – additional coatings offer long-lasting rust and corrosion resistance

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Restores vehicle handling
• Restores OE alignment
• Reduces tire wear
• Improves steering response

Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation. 

Product Features:

• EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
• Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
• Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

• Double lock beading with barbed tube end provides superior hose/coupling integrity
• Zinc coated tubes protect against rust and corrosion
• Banjo end lock tabs prevent hose end from loosening
• Restrictor helps absorb vibration and reduce noise

Rein OE Quality power steering high pressure feed and return hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch all as specified by the OE manufacturer.

Product Features:

• A direct fit, replacement hose and line assembly
• SAE J188 compliant high pressure rubber compound hose with internal noise absorber
• SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
• Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
• Pre attached protective jacket(s) and heat sleeve(s), where required

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

• Zinc coated tubes protect against rust and corrosion

With over 28 years of Steering Systems manufacturing experience, you can expect Best In Class performance from AAE’s New products The first NEW Rack and Pinion and Power Steering Pump Product line for the Automotive Aftermarket. By eliminating original design flaws and taking advantage of AAE’s vast product specific manufacturing experience, these NEW racks and pumps are the Best In Class alternative replacement parts

Product Features:

• All NEW products have been re-engineered for improved durability and performance
• Every part is 100% hydraulically tested under load for vehicle simulation.

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

• PWR Rack and Pinions are 100% NEW and Engineered In North America
• All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
• Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
• Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
• Precision Routed and Constructed Fluid Transfer Tubes
• Manufactured to meet or exceed OE requirements
• Engineering, test, and quality validation in the USA

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Rubber or Thermoplastic material
• No Squeak
• Restores vehicle handling
• Improves body roll

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Rubber or Thermoplastic material
• No Squeak
• Restores vehicle handling
• Improves body roll

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

• Heat/abrasion tubing protects vital areas

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Protects Rack & Pinion surfaces from contamination
• Hardware included

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Manufactured using premium materials
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features

The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Manufactured to meet or exceed OE specifications

Product Features:

• Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
• Small size provides an easy fit, even in cramped systems
• Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
• Filter can be easily serviced, extending its functional lifespan considerably

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

• In-line filter with serviceable filter element
• Patented built-in bypass that filters up to 190 micron particles
• Designed to extend the life of the steering system
• Sure-grip barb connections are included to ensure proper hose fitment

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

• In-line filter with serviceable filter element
• Patented built-in bypass that filters up to 190 micron particles
• Designed to extend the life of the steering system
• Sure-grip barb connections are included to ensure proper hose fitment

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

• In-line filter with serviceable filter element
• Patented built-in bypass that filters up to 190 micron particles
• Designed to extend the life of the steering system
• Sure-grip barb connections are included to ensure proper hose fitment

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

• In-line filter with serviceable filter element
• Patented built-in bypass that filters up to 190 micron particles
• Designed to extend the life of the steering system
• Sure-grip barb connections are included to ensure proper hose fitment

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Provides caster and pinion angle adjustments on vehicles with frozen OEM bolts
• Greaseable allowing for ease of future adjustments
• Adjustment Range: +/- 1.5 Degrees
• Easy to install
• Construction and design validated by MOOG engineers