2018 Ford Police Interceptor Utility Towing Products

Essential Towing Products for 2018 Ford Police Interceptor Utilities

CURT – Trailer Hitch: 2" Receiver, 4,000 LB Capacity, Installs as low as 30 Mins (Part No.13386)

Trailer Hitch: 2" Receiver, 4,000 LB Capacity, Installs as low as 30 Mins

from

$194.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Explorer and Ford Police Interceptor Utility (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 4,000 lbs. gross trailer weight and 400 lbs. tongue weight
  • Compatible with weight distribution hitch (5,000 lbs. WD / 500 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Dual-Output 7/4-Way Connector (Plugs into USCAR) (Part No.55774)

Dual-Output 7/4-Way Connector (Plugs into USCAR)

from

$31.49
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 7-way RV blade connector. It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:
  • Plugs into USCAR socket to provide 4-way and 7-way trailer wiring connectors
  • Fits USCAR-equipped vehicles with factory tow plugs only
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • 7-way RV blade socket adds reverse lights, electric brakes and auxiliary power
  • Dust covers included to keep connectors clean when not in use
  • Slit loom keeps wires contained and well protected
  • Metal bracket securely mounts wiring to the vehicle or trailer hitch
See More

CURT – Dual-Output 6/4-Way Connector (Plugs into USCAR) (Part No.55664)

Dual-Output 6/4-Way Connector (Plugs into USCAR)

from

$46.49
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM USCAR connector and offers a 4-way flat and 6-way round connector (see application info to verify fitment with your vehicle). It also comes with a mounting bracket for easy installation. CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:
  • Plugs into USCAR socket to provide 4-way and 6-way trailer wiring connectors
  • Fits USCAR-equipped vehicles with factory tow plugs only
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • 6-way round socket adds connection for electric brakes and auxiliary power
  • Dust covers included to keep connectors clean when not in use
  • Slit loom keeps wires contained and well protected
  • Metal bracket securely mounts wiring to the vehicle or trailer hitch
See More

CURT – Trailer Brake Controller Harness (Part No.51322)

Trailer Brake Controller Harness

from

$11.49
A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle’s factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Ford Bronco, E150, E250, E350, E450 Club Wagon, Econoline, Excursion, Expedition, Explorer, Flex, F150, F150 Heritage, F250, F250 HD, F350 Super Duty, Police Interceptor Utility, Windstar, Land Rover LR3, LR4, Range Rover, Evoque, Sport, Lincoln Mark LT, MKT, Navigator and Mercury Mountaineer (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. They’re also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.

Product Features:
  • Allows a CURT trailer brake controller to be plugged into OEM socket
  • Quick plug harness installs with plug-and-play convenience
  • Wire colors match standard brake controller harnesses
  • Includes 24″ of 12 gauge wire for flexible installation
  • Slit-loom sleeve keeps wires contained and protected
See More

CURT – Replacement OE 7-Way RV Blade Socket (Plugs into USCAR) (Part No.55415)

Replacement OE 7-Way RV Blade Socket (Plugs into USCAR)

from

$20.99
Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer connector, plugging into a standard USCAR socket (see application info to verify fitment with your vehicle). It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection.

Product Features:
  • Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
  • Spring-loaded dust cover keeps connector clean when not in use
See More

CURT – Replacement OE 7-Way RV Blade Socket (Twists into USCAR) (Part No.56415)

Replacement OE 7-Way RV Blade Socket (Twists into USCAR)

from

$24.49
Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way OEM USCAR replacement connector is designed to plug into a twist-in OEM vehicle socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection (see application info to verify fitment with your vehicle).

Product Features:
  • Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
  • Twist-in, plug-and-play design eliminates the need for cutting or splicing
  • 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
  • Spring-loaded dust cover keeps connector clean when not in use
See More

CURT – Replacement OE 4-Way Flat Socket (Plugs into USCAR) (Part No.55515)

Replacement OE 4-Way Flat Socket (Plugs into USCAR)

from

$30.99
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This custom wiring connector provides a 4-way flat connector socket and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:
  • Plugs into USCAR socket to provide 4-way flat trailer wiring connector
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
  • Slit loom keeps wires contained and well protected
  • Backed by a limited one-year warranty
See More

CURT – Replacement USCAR Socket with 24in. Wires (Vehicle Side) (Part No.56229)

Replacement USCAR Socket with 24in. Wires (Vehicle Side)

from

$24.99
Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way USCAR replacement harness is designed to replace an existing USCAR plug and supply power for tail lights, turn signals, electric trailer brakes, a battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with color-coded wires and 24″ of bonded wire for easy splicing into your vehicle’s wiring system. This 7-way USCAR connector is a female-end socket, specifically designed for the vehicle side of the connection.

Product Features:
  • Replaces damaged or missing USCAR vehicle harness
  • Includes 24″ color-coded, bonded wires for easy installation
See More

CURT – Heavy-Duty Replacement OE 7-Way RV Blade Socket (Plugs into USCAR) (Part No.55416)

Heavy-Duty Replacement OE 7-Way RV Blade Socket (Plugs into USCAR)

from

$20.99
Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer wiring connector, plugging into a standard USCAR socket (see application info to verify fitment with your vehicle). It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection (see application info to verify fitment with your vehicle).

Product Features:
  • Weather-resistant dust cover features a rubber insert to seal out moisture
  • Spring-loaded cover also helps keep connector clean when not in use
  • Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
See More

CURT – Replacement OE 4-Way Flat Socket (T s into USCAR) (Part No.55384)

Replacement OE 4-Way Flat Socket (T s into USCAR)

from

$33.49
Stress is the last thing you should feel when towing a trailer — whether you’re hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it. CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Though this special socket is not equipped on every vehicle, a CURT custom wiring connector (also called a T-connector) utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle’s wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular connector provides a 4-way flat socket while retaining use of the existing OEM socket. It is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). It comes with a dust cover to keep the connector socket clean when not in use.

Product Features:
  • Plugs into USCAR connection to add 4-way flat and retain use of existing socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
  • Slit loom keeps wires contained and well protected
See More

Upgrade your 2018 Ford Police Interceptor Utility with Top-Quality Towing Products

When it comes to maintaining or upgrading your 2018 Ford Police Interceptor Utility, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Towing Products are key to keeping your Police Interceptor Utility functioning at its best. At Advance Auto Parts, we offer a wide selection of 10 Towing Products for the 2018 Ford Police Interceptor Utility, designed to meet your needs without breaking the bank. From Trailer Wiring replacements to Trailer Hitches upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Towing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Towing Products for your 2018 Ford Police Interceptor Utility at great prices. Our Towing Products inventory for this model ranges from just $11.49 to $194.99, with an average price of $44.04. Our 10 Towing Products in stock come from trusted brands, so you’re sure to find the right part for your 2018 Ford Police Interceptor Utility without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Towing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 Ford Police Interceptor Utility is always ready to roll. We’re committed to providing you with everything you need to keep your Police Interceptor Utility in top shape, all in one place. Start shopping confidently below for your 2018 Ford Police Interceptor Utility!

Best-Selling Trailer Wiring for 2018 Ford Police Interceptor Utilities

Enhance the driving experience in your Ford with 8 quality Trailer Wiring components, starting at $20.99.

CURT – Dual-Output 7/4-Way Connector (Plugs into USCAR) (Part No.55774)

Dual-Output 7/4-Way Connector (Plugs into USCAR)

from

$31.49
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 7-way RV blade connector. It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:
  • Plugs into USCAR socket to provide 4-way and 7-way trailer wiring connectors
  • Fits USCAR-equipped vehicles with factory tow plugs only
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • 7-way RV blade socket adds reverse lights, electric brakes and auxiliary power
  • Dust covers included to keep connectors clean when not in use
  • Slit loom keeps wires contained and well protected
  • Metal bracket securely mounts wiring to the vehicle or trailer hitch
See More

CURT – Replacement USCAR Socket with 24in. Wires (Vehicle Side) (Part No.56229)

Replacement USCAR Socket with 24in. Wires (Vehicle Side)

from

$24.99
Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way USCAR replacement harness is designed to replace an existing USCAR plug and supply power for tail lights, turn signals, electric trailer brakes, a battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with color-coded wires and 24″ of bonded wire for easy splicing into your vehicle’s wiring system. This 7-way USCAR connector is a female-end socket, specifically designed for the vehicle side of the connection.

Product Features:
  • Replaces damaged or missing USCAR vehicle harness
  • Includes 24″ color-coded, bonded wires for easy installation
See More

CURT – Replacement OE 4-Way Flat Socket (T s into USCAR) (Part No.55384)

Replacement OE 4-Way Flat Socket (T s into USCAR)

from

$33.49
Stress is the last thing you should feel when towing a trailer — whether you’re hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it. CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Though this special socket is not equipped on every vehicle, a CURT custom wiring connector (also called a T-connector) utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicle’s wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular connector provides a 4-way flat socket while retaining use of the existing OEM socket. It is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). It comes with a dust cover to keep the connector socket clean when not in use.

Product Features:
  • Plugs into USCAR connection to add 4-way flat and retain use of existing socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
  • Slit loom keeps wires contained and well protected
See More

CURT – Replacement OE 4-Way Flat Socket (Plugs into USCAR) (Part No.55515)

Replacement OE 4-Way Flat Socket (Plugs into USCAR)

from

$30.99
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This custom wiring connector provides a 4-way flat connector socket and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:
  • Plugs into USCAR socket to provide 4-way flat trailer wiring connector
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Dust cover included to keep connector clean when not in use
  • Slit loom keeps wires contained and well protected
  • Backed by a limited one-year warranty
See More

CURT – Heavy-Duty Replacement OE 7-Way RV Blade Socket (Plugs into USCAR) (Part No.55416)

Heavy-Duty Replacement OE 7-Way RV Blade Socket (Plugs into USCAR)

from

$20.99
Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer wiring connector, plugging into a standard USCAR socket (see application info to verify fitment with your vehicle). It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection (see application info to verify fitment with your vehicle).

Product Features:
  • Weather-resistant dust cover features a rubber insert to seal out moisture
  • Spring-loaded cover also helps keep connector clean when not in use
  • Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
See More

CURT – Dual-Output 6/4-Way Connector (Plugs into USCAR) (Part No.55664)

Dual-Output 6/4-Way Connector (Plugs into USCAR)

from

$46.49
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM USCAR connector and offers a 4-way flat and 6-way round connector (see application info to verify fitment with your vehicle). It also comes with a mounting bracket for easy installation. CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:
  • Plugs into USCAR socket to provide 4-way and 6-way trailer wiring connectors
  • Fits USCAR-equipped vehicles with factory tow plugs only
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • 6-way round socket adds connection for electric brakes and auxiliary power
  • Dust covers included to keep connectors clean when not in use
  • Slit loom keeps wires contained and well protected
  • Metal bracket securely mounts wiring to the vehicle or trailer hitch
See More

CURT – Replacement OE 7-Way RV Blade Socket (Plugs into USCAR) (Part No.55415)

Replacement OE 7-Way RV Blade Socket (Plugs into USCAR)

from

$20.99
Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer connector, plugging into a standard USCAR socket (see application info to verify fitment with your vehicle). It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection.

Product Features:
  • Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
  • Spring-loaded dust cover keeps connector clean when not in use
See More

CURT – Replacement OE 7-Way RV Blade Socket (Twists into USCAR) (Part No.56415)

Replacement OE 7-Way RV Blade Socket (Twists into USCAR)

from

$24.49
Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way OEM USCAR replacement connector is designed to plug into a twist-in OEM vehicle socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection (see application info to verify fitment with your vehicle).

Product Features:
  • Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
  • Twist-in, plug-and-play design eliminates the need for cutting or splicing
  • 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
  • Spring-loaded dust cover keeps connector clean when not in use
See More

Most Popular 2018 Ford Police Interceptor Utility Trailer Hitches

Customize your Ford with 1 Trailer Hitches products like Trailer Hitch – Class I, all priced under $194.99.

CURT – Trailer Hitch: 2" Receiver, 4,000 LB Capacity, Installs as low as 30 Mins (Part No.13386)

Trailer Hitch: 2" Receiver, 4,000 LB Capacity, Installs as low as 30 Mins

from

$194.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Explorer and Ford Police Interceptor Utility (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 4,000 lbs. gross trailer weight and 400 lbs. tongue weight
  • Compatible with weight distribution hitch (5,000 lbs. WD / 500 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Top Picks for 2018 Ford Police Interceptor Utility Trailer Brake Control Parts

Upgrade Ford Police Interceptor Utilities with top-quality Trailer Brake Control Parts parts, including 1 OEM and aftermarket selections for your 2018 model.

CURT – Trailer Brake Controller Harness (Part No.51322)

Trailer Brake Controller Harness

from

$11.49
A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle’s factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Ford Bronco, E150, E250, E350, E450 Club Wagon, Econoline, Excursion, Expedition, Explorer, Flex, F150, F150 Heritage, F250, F250 HD, F350 Super Duty, Police Interceptor Utility, Windstar, Land Rover LR3, LR4, Range Rover, Evoque, Sport, Lincoln Mark LT, MKT, Navigator and Mercury Mountaineer (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. They’re also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.

Product Features:
  • Allows a CURT trailer brake controller to be plugged into OEM socket
  • Quick plug harness installs with plug-and-play convenience
  • Wire colors match standard brake controller harnesses
  • Includes 24″ of 12 gauge wire for flexible installation
  • Slit-loom sleeve keeps wires contained and protected
See More

FAQs for 2018 Ford Police Interceptor Utility Towing Products

Which Towing Products are best-sellers for 2018 Ford Police Interceptor Utilities?

Out of 10 Towing Products that fit 2018 Ford Police Interceptor Utilities, the following parts are the top sellers:

What’s the price range for 2018 Ford Police Interceptor Utility Towing Products?

Towing Product prices for the 2018 Ford Police Interceptor Utility start at $11.49 and go up to $194.99 for the most premium parts.

What’s the average price of a Towing Product for a 2018 Ford Police Interceptor Utility?

The average price for Towing Products for the 2018 Ford Police Interceptor Utility is $44.04. Keep in mind the variety of part types within our Towing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Towing Products for other Ford Police Interceptor Utility model years?

Yes, we currently carry Towing Products for 8 model years of Ford Police Interceptor Utilities between 2013 and 2021. Towing Products are bought most frequently for the following model years: 2021, 2020, 2019, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Towing Products for my 2018 Ford Police Interceptor Utility?

The cheapest 2018 Ford Police Interceptor Utility Towing Products we carry in stock are:

What types of Towing Products do you sell for my 2018 Ford Police Interceptor Utility?

As of 2/5/25, these are some of the most in-demand types of Towing Products for a 2018 Ford Police Interceptor Utility:

Can I get help with 2018 Ford Police Interceptor Utility Towing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Towing Products and more.

What is your return policy for Ford Police Interceptor Utility Towing Products?

Advance Auto Parts keeps returns simple. For new Ford Police Interceptor Utility Towing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.