2018 Ford Mustang Engine Parts

Essential Engine Parts for 2018 Ford Mustangs

NTK – Engine Cylinder Head Temperature Sensor (Part No.EJ0009)

Engine Cylinder Head Temperature Sensor

from

$33.99
The Engine Cylinder Head Temperature Sensor determines the exact temperature of the cylinder head by sending an analog signal to the ECM to calculate timing and fuel delivery for maximum engine performance, efficiency and engine operating temperature. The Engine Cylinder Head Temperature Sensor is located on the cylinder head. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:
  • OE MATCHED: Probe length matched to OE. Thread sealer pre-applied if necessary
  • FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
  • THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor
See More

Felpro – Engine Conversion Gasket Set (Part No.CS 8471-5)

Engine Conversion Gasket Set

from

$37.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
  • Includes all the parts necessary to complete the repair unless otherwise noted
  • Includes all the parts necessary to complete the repair unless otherwise noted
See More

Dorman – Rear Main Seal Retainer (Part No.635-557)

Rear Main Seal Retainer

from

$62.99
This direct replacement rear main seal cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards..

Product Features:
  • Direct replacement – this rear main seal cover matches the fit and function of the original equipment cover for a trouble-free installation.
  • Durable construction – this rear main seal cover is made of quality materials for a reliable fit and enduring service life
  • Convenient solution – get a quality repair solution without the hassle of buying original equipment
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
See More

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S447)

Engine Timing Crankshaft Sprocket

from

$19.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:
  • Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Refer to our online catalog for detailed application-specific information
See More

Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.15330)

Remanufactured Crankshaft Kit

from

$349.99
Remanufactured precision machined OE crankshafts.

Product Features:
  • Includes matching rod and main bearings.
  • Journals Micropolished.
  • All units subject to complete quality inspection.
See More

NTK – Camshaft Position Sensor (Part No.EC0117)

Camshaft Position Sensor

from

$32.99
The Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. NTK Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:
  • THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
  • OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
  • EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
  • PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
See More

Rotomaster – Turbocharger (Part No.A1220115N)

Turbocharger

from

$787.99
Turbocharger

Sealed Power – Engine Valve Lifter (Part No.HT-900B)

Engine Valve Lifter

from

$29.99
Engine Valve Lifter

aFe POWER – Hot Charge Pipe (Part No.46-20258-L)

Hot Charge Pipe

from

$384.99
aFe Powers Charge Pipes are constructed from mandrel-bent aluminum tubing for maximum flow then, powder-coated for a nice finish. The high-temp wrinkle-black powder-coating also insulates the tubes from engine heat and protects the tube from corrosion. The smooth transitional bends decrease turbulence and minimize loss pressure to maximize horsepower and torque. Also included is one 1/8 NPT port on each tube which is provided for a sensor or water-methanol injection. Each set of aFe Charge Pipes comes with a unique laser-cut aFe Power logo plate attached for an aggressive style.

Product Features:
  • Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
  • 4-Ply Heavy Duty Silicone Couplings To Endure High Pressures
  • Includes Heavy Duty T-Bolt Clamps To Ensure A Secure Fit
  • This Item Is Not CARB Exempt And Isn’t Legal For Purchase In CA
See More

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC1124)

Coolant Temperature Sensor with O-Ring

from

$117.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

National – Multi Purpose Seal (Part No.710600)

Multi Purpose Seal

from

$85.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

ARP Auto Racing – For Use With 289/ 460 Cubic" Ford, 5/8" Socket Size, 5/8" – 18 Thread Size (Part No.150-2501)

For Use With 289/ 460 Cubic" Ford, 5/8" Socket Size, 5/8" - 18 Thread Size

from

$30.99
As the crankshaft flexes and twists, the balancer absorbs incredible amounts of kinetic energy. To ensure that the balancer is locked in position, ARP has developed these ultra strong 200,000 Pounds Per Square Inch bolts that let you exert maximum clamping force. Special features comes with 1/4 Inch thick, wide area washer and an extra tall 12 point head that accepts a deep socket and eliminates the worry of stripping the head.

Product Features:
  • Ultra Strong Bolt Rated At 200,000 Pounds Per Square Inch
  • Professional Quality Fasteners
  • Delivers ARP Quality And Reliability
  • Made In USA
  • 2.05″ Underhead Length
  • Ford 289-460 (except 351C)
  • Sold Individually
  • 200,000 PSI
See More

National – Shaft Repair Sleeve (Part No.99363)

Shaft Repair Sleeve

from

$63.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

aFe POWER – BladeRunner Series (Part No.46-20250AS)

BladeRunner Series

from

$354.99
These couplings feature high temperature 5-Ply reinforced silicone material which meet or exceed SAEJ20 Standard.

Product Features:
  • 5-Ply Reinforced High Temp Silicone Couplings w/Clamps Set
  • Coupler Hose Allows For Expansion/Movement/Vibration
  • This Kit Fits aFe Intercooler Tubes 46-20254-B Or 46-20254-L Only
See More

Felpro – Engine Oil Pump Gasket (Part No.70141)

Engine Oil Pump Gasket

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Cloyes Gear – Engine Timing Chain Tensioner (Part No.P441)

Engine Timing Chain Tensioner

from

$35.99
A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Meet or exceed OEM performance requirements
  • Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
See More

Cloyes Gear – Engine Timing Chain Kit (Part No.9-0387SJ)

Engine Timing Chain Kit

from

$388.99
Timing Chain Kits includes all components for a quick and efficient replacement

Product Features:
  • Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience
  • Utilizes the latest in design and technology to offer a complete chain kit solution
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • CAD designed and manufactured using premium materials
  • Refer to our online catalog for detailed application-specific information
See More

Motorcraft – Engine Oil Filler Cap (Part No.A6140201834MTR)

Engine Oil Filler Cap

from

$11.91
Motorcraft® offers a wide variety of caps to support the ongoing maintenance needs of Ford and Lincoln vehicles. Plus, all are recommended by Ford Motor Company.

Product Features:
  • Engineered to conform to strict emission control standards
  • Both twist-lock and push-on types are available
See More

Felpro – OIL PAN GASKET SET (Part No.OS 30408 C)

OIL PAN GASKET SET

from

$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
  • OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
  • ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
See More

Febi – EXHAUST NUT (Part No.H1001570904FEB)

EXHAUST NUT

from

$2.19
EXHAUST NUT

Anchor – Engine Mount: Front Right, 1 Piece (Part No.3001)

Engine Mount: Front Right, 1 Piece

from

$52.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to FORD 96-04;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 1996-2004
  • Weight approx: 5 Lbs
  • PART GROUP: 3001, 3002
  • THREAD: M14-2.0
See More

Mahle – Timing Guide Rail (Part No.A5040196036MAH)

Timing Guide Rail

from

$35.42
Timing Guide Rail

Dorman – Harmonic Balancer Assembly (Part No.594-725)

Harmonic Balancer Assembly

from

$93.99
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:
  • Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction – stringent specifications and careful construction help ensure longevity.
  • Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Felpro – VALVE COVER GASKET SET (Part No.VS 50029 C)

VALVE COVER GASKET SET

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Dorman – Camshaft Phaser- Variable Timing Camshaft Gear (Part No.917-250XD)

Camshaft Phaser- Variable Timing Camshaft Gear

from

$219.99
The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.

Product Features:
  • Upgraded replacement – this VVT sprocket directly replaces the original equipment on certain Ford, Lincoln and Mercury vehicles.
  • Enhanced reliability – features stronger alloy plate and friction-reducing rotor design to prevent future failure.
  • Hardware included – comes with torque to yield bolt for secure fit
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Cloyes Gear – Engine Timing Chain (Part No.C189)

Engine Timing Chain

from

$33.99
A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
  • CAD designed and manufactured using premium materials
  • Refer to our online catalog for detailed application-specific information
  • Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
See More

Dorman – Steel Cup Expansion Plug 1-45/64 In. SC, Height 0.270 (sold by each) (Part No.555-033)

Steel Cup Expansion Plug 1-45/64 In. SC, Height 0.270 (sold by each)

from

$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Turbocharger Mounting Stud Kit (Part No.675-229)

Turbocharger Mounting Stud Kit

from

$17.49
This turbocharger stud is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this turbocharger stud matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Upgrade your 2018 Ford Mustang with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2018 Ford Mustang, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Engine Parts are key to keeping your Mustang functioning at its best. At Advance Auto Parts, we offer a wide selection of 96 Engine Parts for the 2018 Ford Mustang, designed to meet your needs without breaking the bank. From Engine Mount replacements to Engine Gaskets and Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2018 Ford Mustang at great prices. Our Engine Parts inventory for this model ranges from just $2.19 to $1,293.99, with an average price of $85.26. Our 96 Engine Parts in stock come from 23 trusted brands, so you’re sure to find the right part for your 2018 Ford Mustang without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 Ford Mustang, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, National, Carquest Premium, and more. FELPRO Engine Parts start at just $7.99 and boast an impressive 5 stars average rating from customers. National and Carquest Premium also bring quality to the table, with Engine Parts available starting at $8.99, and at an average 4 stars rating. With 72 customer reviews and counting, our 2018 Ford Mustang Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 Ford Mustang is always ready to roll. We’re committed to providing you with everything you need to keep your Mustang in top shape, all in one place. Start shopping confidently below for your 2018 Ford Mustang!

Best-Selling Engine Mounts for 2018 Ford Mustangs

Enhance the driving experience in your Ford with 1 quality Engine Mount components, starting at $163.99.

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.3250)

Engine Mount: Front Left, Front Right, 1 Piece

from

$163.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to FORD 05-22;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2005-2022
  • Weight approx: 4 Lbs
  • HYDRAULIC
  • PART GROUP: 3250, 3250
See More

Most Popular 2018 Ford Mustang Engine Gaskets and Seals

Customize your Ford with 13 Engine Gaskets and Seals products like Valve Cover Gaskets, Oil Pan Gaskets, and Timing Cover Gasket Sets, all priced under $108.99.

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50878 R)

Engine Valve Cover Gasket Set

from

$51.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – Oil Pan Gasket Set: Molded Rubber With Rigid Carrier, 1 Piece Set (Part No.OS 30850 R)

Oil Pan Gasket Set: Molded Rubber With Rigid Carrier, 1 Piece Set

from

$18.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – TIMING COVER GASKET SET (Part No.TCS 46159)

TIMING COVER GASKET SET

from

$59.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50902 R)

Engine Valve Cover Gasket Set

from

$51.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SUPERIOR SEAL — Manufactured with rubber compounds to help ensure a consistent and long-life seal
  • PRECISE DESIGN — Engineered to work with the embossed cover and pan flanges
  • PREVENTS OVERTIGHTENING — Features compression limiters incorporated into the design to help eliminate overtightening (application specific)
  • OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72917)

Engine Valve Stem Oil Seal Set

from

$33.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Felpro – Engine Oil Pump Seal (Part No.72705)

Engine Oil Pump Seal

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Each gasket is built to meet or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – CONVERSION GASKET SET/ LOWER GASKET SET (Part No.CS 26250)

CONVERSION GASKET SET/ LOWER GASKET SET

from

$108.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
  • Includes all the parts necessary to complete the repair unless otherwise noted
  • Includes all the parts necessary to complete the repair unless otherwise noted
See More

Dorman – Rear Main Seal Retainer (Part No.635-557)

Rear Main Seal Retainer

from

$62.99
This direct replacement rear main seal cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards..

Product Features:
  • Direct replacement – this rear main seal cover matches the fit and function of the original equipment cover for a trouble-free installation.
  • Durable construction – this rear main seal cover is made of quality materials for a reliable fit and enduring service life
  • Convenient solution – get a quality repair solution without the hassle of buying original equipment
  • Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
See More

Dorman – Rubber Valve Cover Gasket Set: Exact Fit, 4 Pieces (Part No.263-202)

Rubber Valve Cover Gasket Set: Exact Fit, 4 Pieces

from

$36.99
This valve cover gasket is designed to precisely match the original equipment gasket for specific engine applications. Made of durable materials, this gasket provides a long-lasting seal under extreme underhood conditions. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:
  • Direct replacement – this valve cover gasket is designed to match the fit, function and performance of an original equipment gasket on specified vehicles.
  • Ideal solution – engineered to help ensure a secure seal when an original gasket is due for service or damaged.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

NOK – Valve Stem Seal (Part No.A8070245108NOK)

Valve Stem Seal

from

$4.19
Valve Stem Seal

NOK – Valve Stem Seal (Part No.A8070284660NOK)

Valve Stem Seal

from

$2.96
Valve Stem Seal

Ishino – Valve Stem Seal (Part No.A8070245108ISH)

Valve Stem Seal

from

$2.27
Valve Stem Seal

Ishino – Valve Stem Seal (Part No.A8070284660ISH)

Valve Stem Seal

from

$2.24
Valve Stem Seal

Top Picks for 2018 Ford Mustang Camshafts

Upgrade Ford Mustangs with top-quality Camshafts parts, including 13 OEM and aftermarket selections for your 2018 model.

Carquest Premium – Camshaft Position Sensor (Part No.CSC1291)

Camshaft Position Sensor

from

$53.99
Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our camshaft position sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium camshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Engineered with technology that provides increased accuracy with a stronger, more consistent signal
  • Sensors are based on proven hall effect and variable reluctance technology
  • Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application
  • O-rings and seals are included if required
  • Weather-tight connectors prevent leaks and corrosion for longer life
  • Extensive design validation testing and 100% end-of-line tested
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Camshaft Sensor (Part No.CSC1283)

Camshaft Sensor

from

$29.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1481)

Engine Camshaft Position Sensor

from

$27.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:
  • Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

Motorcraft – Cam Position Sensor (Part No.A4015839999MTR)

Cam Position Sensor

from

$48.86
Motorcraft Cam Position Sensors are designed and tested to meet OE specifications for durability and reliability under extreme conditions. These are manufactured using high standards which ensure long lasting durability. They have high resistance and offer superior service life.

Product Features:
  • Ensures long lasting durability
  • Reliable under extreme conditions
  • Made of high quality material
  • Resists fatigue failure
  • Offers superior service life
See More

NTK – Camshaft Position Sensor (Part No.EC0128)

Camshaft Position Sensor

from

$31.99
The Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. NTK Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:
  • THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
  • OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
  • EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
  • PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
See More

Motorcraft – Cam Position Sensor (Part No.A4015520403MTR)

Cam Position Sensor

from

$100.54
Motorcraft Cam Position Sensors are designed and tested to meet OE specifications for durability and reliability under extreme conditions. These are manufactured using high standards which ensure long lasting durability. They have high resistance and offer superior service life.

Product Features:
  • Ensures long lasting durability
  • Reliable under extreme conditions
  • Made of high quality material
  • Resists fatigue failure
  • Offers superior service life
See More

Autopart International Inc – Camshaft Position Se (Part No.A40151958795API)

Camshaft Position Se

from

$61.72
Camshaft Position Se

WSO – Camshaft Position Se (Part No.A4015520403WSO)

Camshaft Position Se

from

$55.00
Camshaft Position Se

Delphi – Engine Camshaft Position Sensor (Part No.SS11385)

Engine Camshaft Position Sensor

from

$43.49
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Delphi products are manufactured in a Delphi ISO certified facility
  • Designed digital output for maximum signal to noise ratio
  • All parts used in the manufacture process are Delphi validated
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
See More

Dorman – Magnetic Camshaft Position Sensor (Part No.917-734)

Magnetic Camshaft Position Sensor

from

$37.99
This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:
  • Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
  • Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Delphi – Engine Camshaft Position Sensor (Part No.SS11386)

Engine Camshaft Position Sensor

from

$32.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
  • Designed digital output for maximum signal to noise ratio
  • All parts used in the manufacture process are Delphi validated
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
See More

Dorman – Camshaft Position Sensor (Part No.962-045)

Camshaft Position Sensor

from

$24.99
This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:
  • Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles.
  • Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Motorcraft – Cam Position Sensor (Part No.A4015671388MTR)

Cam Position Sensor

from

$12.95
Motorcraft Cam Position Sensors are designed and tested to meet OE specifications for durability and reliability under extreme conditions. These are manufactured using high standards which ensure long lasting durability. They have high resistance and offer superior service life.

Product Features:
  • Ensures long lasting durability
  • Reliable under extreme conditions
  • Made of high quality material
  • Resists fatigue failure
  • Offers superior service life
See More

In-Demand Engine Timing Parts for 2018 Ford Mustangs

Select from 30 premium Engine Timing Parts parts for your 2018 Ford Mustang, with prices ranging from $2.79 to $357.99.

National – Shaft Repair Sleeve (Part No.99187)

Shaft Repair Sleeve

from

$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Engine Harmonic Balancer Repair Sleeve (Part No.88187)

Engine Harmonic Balancer Repair Sleeve

from

$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Made of stainless steel
  • Designed to prevent timing cover seal leaks
  • Takes up gaps caused by worn-out harmonic balancer shafts
See More

Driveworks – Oil Seal (Part No.S-223750)

Oil Seal

from

$2.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Dorman – Variable Valve Timing Solenoid (Part No.918-000)

Variable Valve Timing Solenoid

from

$30.99
This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:
  • Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications.
  • Durable construction – this part is made from quality materials to ensure a long service life.
  • Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
  • Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
See More

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5514)

Engine Timing Chain Tensioner

from

$54.99
A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Meet or exceed OEM performance requirements
  • Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
  • Hydraulic
See More

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5735)

Engine Timing Chain Tensioner

from

$39.99
A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Meet or exceed OEM performance requirements
  • Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1055)

Engine Variable Valve Timing (VVT) Solenoid

from

$32.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Variable Valve Timing Solenoid (Part No.917-196)

Variable Valve Timing Solenoid

from

$29.99
This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:
  • Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications.
  • Durable construction – this part is made from quality materials to ensure a long service life.
  • Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
  • Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
See More

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 128, 54 Links, Timing Components, With Sprockets (Part No.9-0757S)

Primary Timing Chain Kit: Exact Fit, 128, 54 Links, Timing Components, With Sprockets

from

$357.99
Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:
  • Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
  • Utilizes the latest in design and technology to offer a complete chain kit solution
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVC1235)

Engine Variable Valve Timing (VVT) Sprocket

from

$112.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S1039)

Engine Timing Crankshaft Sprocket

from

$26.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:
  • Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Refer to our online catalog for detailed application-specific information
See More

Cloyes Gear – Engine Timing Chain Guide (Part No.9-5737)

Engine Timing Chain Guide

from

$3.99
A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements, timing guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Designed to meet or exceed OEM performance requirements
  • Refer to our online catalog for detailed application-specific information
See More

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 128, 54 Links, Timing Components, Without Sprockets (Part No.9-0757SX)

Primary Timing Chain Kit: Exact Fit, 128, 54 Links, Timing Components, Without Sprockets

from

$321.99
Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:
  • Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
  • Utilizes the latest in design and technology to offer a complete chain kit solution
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
See More

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 134 Links, Timing/Oil Pump Components, With Sprockets (Part No.9-0744SA)

Primary Timing Chain Kit: Exact Fit, 134 Links, Timing/Oil Pump Components, With Sprockets

from

$273.99
Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:
  • Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
  • Utilizes the latest in design and technology to offer a complete chain kit solution
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
See More

Cloyes Gear – Primary Timing Chain Kit: Exact Fit, 134 Links, Timing/Oil Pump Components, Without Sprockets (Part No.9-0744SAX)

Primary Timing Chain Kit: Exact Fit, 134 Links, Timing/Oil Pump Components, Without Sprockets

from

$197.99
Designed for the replacement of worn or damaged timing chains, tensioners, and guides, Timing Chain Kits includes all components for a quick and efficient replacement. Each part is CAD designed and manufactured using premium materials. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing.

Product Features:
  • Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
  • Utilizes the latest in design and technology to offer a complete chain kit solution
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVA1396)

Engine Variable Valve Timing (VVT) Sprocket

from

$76.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVA1379)

Engine Variable Valve Timing (VVT) Sprocket

from

$65.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Cloyes Gear – Engine Timing Chain (Part No.C744)

Engine Timing Chain

from

$53.99
A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
  • CAD designed and manufactured using premium materials
  • Refer to our online catalog for detailed application-specific information
  • Refer to our online catalog for detailed application-specific information
See More

Cloyes Gear – Engine Timing Chain (Part No.C757)

Engine Timing Chain

from

$46.99
A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
  • CAD designed and manufactured using premium materials
  • Refer to our online catalog for detailed application-specific information
  • Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
See More

Gates – Camshaft Solenoid Ad (Part No.A51321064552GAT)

Camshaft Solenoid Ad

from

$37.94
Camshaft Solenoid Ad

NTK – EN VAR TIME SOLENOID (Part No.VV0002)

EN VAR TIME SOLENOID

from

$35.99
NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.

Product Features:
  • NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
  • The NTK VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
  • The NTK VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
  • The NTK VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
  • The NTK VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
  • The NTK VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1437)

Engine Variable Valve Timing (VVT) Solenoid

from

$32.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

National – Shaft Repair Sleeve (Part No.99145)

Shaft Repair Sleeve

from

$32.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Dorman – Variable Valve Timing Solenoid (Part No.916-612)

Variable Valve Timing Solenoid

from

$29.49
This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:
  • Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications.
  • Durable construction – this part is made from quality materials to ensure a long service life.
  • Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
  • Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
See More

Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5799)

Engine Timing Chain Tensioner

from

$27.99
A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain. Please refer to our online catalog for detailed application-specific information

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Meet or exceed OEM performance requirements
  • Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
See More

Cloyes Gear – Tensioner Guide (Part No.9-5729)

Tensioner Guide

from

$24.99
Tensioner Guide

Cloyes Gear – Engine Timing Chain (Part No.9-4303)

Engine Timing Chain

from

$19.99
A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
  • CAD designed and manufactured using premium materials
  • Refer to our online catalog for detailed application-specific information
  • Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
See More

Cloyes Gear – Engine Timing Chain Guide (Part No.9-5736)

Engine Timing Chain Guide

from

$19.99
A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements, timing guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Designed to meet or exceed OEM performance requirements
  • Refer to our online catalog for detailed application-specific information
See More

Cloyes Gear – Engine Timing Chain Guide (Part No.9-5738)

Engine Timing Chain Guide

from

$19.99
A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements, timing guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • CAD designed and manufactured using premium materials
  • Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • Designed to meet or exceed OEM performance requirements
  • Refer to our online catalog for detailed application-specific information
See More

Cloyes Gear – Engine Timing Chain Tensioner Guide (Part No.9-5739)

Engine Timing Chain Tensioner Guide

from

$16.99
A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements, Timing Guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:
  • Extensively tested and measured for function, fitment, and durability to ensure optimal performance
  • CAD designed and manufactured using premium materials
  • Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
  • Refer to our online catalog for detailed application-specific information
See More

Most Sold 2018 Ford Mustang Valve Cover and Cylinder Heads

Explore our best-selling Ford parts for the 2018 Mustang among 6 OEM and aftermarket options starting from $9.99.

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72207)

Engine Cylinder Head Bolt Set

from

$72.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Carquest Premium – Engine Cylinder Head Temperature Sensor (Part No.WTA1292)

Engine Cylinder Head Temperature Sensor

from

$9.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Spartan – Engine Cylinder Head; Ford 5.0 DOHC Left Head (Part No.2FGRL)

Engine Cylinder Head; Ford 5.0 DOHC Left Head

from

$1293.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Spartan – Engine Cylinder Head; Ford 5.0 DOHC 18-20 Head (Part No.2FGRR)

Engine Cylinder Head; Ford 5.0 DOHC 18-20 Head

from

$902.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:
  • All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
  • All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
  • All threads and machined surfaces are and repaired with technology that exceeds the original metal
  • Non-sealing iron surfaces painted to prevent oxidization
See More

Dorman – Cylinder Head Temperature Sensor (Part No.926-711)

Cylinder Head Temperature Sensor

from

$27.99
This engine cylinder head temperature sensor is designed to match the fit, function and appearance of the original sensor on specified vehicles. It is engineered to help restore cylinder head temperature measurement function when an original sensor fails due to an internal short circuit, mechanical shock, or other damage.

Product Features:
  • Direct replacement – this engine cylinder head temperature sensor is designed to match the fit and function of an original sensor on specified vehicles
  • Ideal solution – engineered to help restore temperature sensor function when an original sensor fails as a result of electrical faults, shock, or other damage
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quaility – backed by team of product experts in the United States and more than a century of automotive experience
See More

Sealed Power – LIFTER (Part No.HT-2314)

LIFTER

from

$21.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Top-Rated Engine Parts Brands For Your 2018 Ford Mustang

Shop for the best-rated brands offering Engine Parts and other products for your 2018 Ford Mustangs. Below you’ll find some of our best rated Engine Parts from FELPRO, National, and Carquest Premium, and more. Engine Parts from these brands that fit a 2018 Mustang start at just $7.99 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2018 Ford Mustang Engine Parts

When it comes to maintaining or upgrading your 2018 Ford Mustang, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2018 Ford Mustang. With over 12 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.99, with an average price of just $43.85. Plus, with over 18 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

TIMING COVER GASKET SET
from
$59.99
This product is not rated

TIMING COVER GASKET SET

“”

Oil Pan Gasket Set: Molded Rubber With Rigid Carrier, 1 Piece Set
from
$18.99
This product is not rated

Oil Pan Gasket Set: Molded Rubber With Rigid Carrier, 1 Piece Set

“”

Engine Cylinder Head Bolt Set
from
$72.99
This product is not rated

Engine Cylinder Head Bolt Set

“”

Popular National 2018 Ford Mustang Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 2018 Ford Mustang owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2018 Mustang, Advance Auto Parts carries a full inventory of 8 National Engine Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these National Engine Parts range from $8.99 to $85.99, plus, with more than 8 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

Multi Purpose Seal
from
$85.99
This product is not rated

Multi Purpose Seal

“”

Shaft Repair Sleeve
from
$53.99
This product is not rated

Shaft Repair Sleeve

“”

Multi Purpose Seal
from
$8.99
This product is not rated

Multi Purpose Seal

“”

FAQs for 2018 Ford Mustang Engine Parts

Which Engine Parts are best-sellers for 2018 Ford Mustangs?

Out of 96 Engine Parts that fit 2018 Ford Mustangs, the following parts are the top sellers:

What’s the price range for 2018 Ford Mustang Engine Parts?

Engine Part prices for the 2018 Ford Mustang start at $2.19 and go up to $1,293.99 for the most premium parts.

What’s the average price of a Engine Part for a 2018 Ford Mustang?

The average price for Engine Parts for the 2018 Ford Mustang is $85.26. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Ford Mustang model years?

Yes, we currently carry Engine Parts for 56 model years of Ford Mustangs between 1964 and 2025. Engine Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2017, 2016, 2015, and 2014.

What are the cheapest Engine Parts for my 2018 Ford Mustang?

The cheapest 2018 Ford Mustang Engine Parts we carry in stock are:

What are the top-rated Engine Parts that fit the 2018 Ford Mustang?

Out of 72 reviews by customers, our 2018 Ford Mustang Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2018 Ford Mustang and their top-rated products:

What types of Engine Parts do you sell for my 2018 Ford Mustang?

As of 2/5/25, these are some of the most in-demand types of Engine Parts for a 2018 Ford Mustang:

Can I get help with 2018 Ford Mustang Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Engine Parts and more.

What is your return policy for Ford Mustang Engine Parts?

Advance Auto Parts keeps returns simple. For new Ford Mustang Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.