2018 Ford Expedition Ignition and Tune-Up Products
More 2018 Ford Expedition Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 2018 Ford Expedition, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 2018 Ford Expedition Ignition and Tune-Up Products
Motorcraft – Direct Ignition Coil – (Coil on Plug) (Part No.F3005387615MTR)
from
$73.93
Motorcraft ignition coils offer value without compromising quality. They are the right fit for Ford and Lincoln vehicles.
Product Features:
See More
Product Features:
- Helps ensure proper engine performance, maximize fuel economy, minimize both tailpipe emissions and RFI electronic interference
- Helps avoid spark plug failure, drivability complaints, pre-ignition and detonation
- Insulation provides multiple coats on the primary and secondary windings to ensure no internal arcing
- Radio-Frequency Interference (RFI) Suppression
- Magnets hold strength for the coil to maintain proper energy output
- Steel used in the lamination stack to ensure a consistent magnetic field needed to develop the required voltage
- Coil Housing is engineered to withstand extremes in temperature without cracking
Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 8 Count (Part No.EBC1342-8)
from
$299.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48688)
from
$79.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Motorcraft – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.DG-521)
from
$73.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles. Motorcraft and Ford Parts are used throughout Ford vehicles in a variety of applications that help ensure the proper build quality, integrity and long-lasting performance of every Ford car or truck. Motorcraft and Ford Parts are manufactured from first quality materials chosen specifically for maximum performance and application suitability. As with all Motorcraft and Ford Parts, any innovations or improvements developed since the vehicle’s manufacture are included in these after market replacement parts, ensuring the most current technology and performance.
Product Features:
See More
Product Features:
- These coils provide the exact spark timing that helps maximize the engine and emissions performance
- RFI suppression helps minimize electronic noise through a Ford patented spring assembly inside the coil boot
- Engineered to help withstand temperature extremes
- Internal insulation displacement connection is helps make high-reliability internal connections
- Interior insulation helps ensure no internal arcing
- Right fit for each application; helps provide ease of installation and removal
- High grade silicone rubber boot materials do not degrade or stick, aiding in environmental and dielectric sealing
- Housings engineered to help resist cracking in the most extreme conditions
- Ford-patented iron core lamination stack integrates rare earth magnets in the flux circuit to help deliver consistent high energy required for output
Accel – Ford 4-Twr.Dis Supercoil Pack (Part No.140018)
from
$116.99
Engineered to be the only true performance Ford 4-tower style EDIS coil. Advanced bobbin technology, highly specialized silicone magnetic steel core, optimized winding, resistance, and turns ratio result in higher energy and voltage outputs, and longer arc duration. Direct OEM replacement. Must use factory firing order. Compatible with Ford EDIS computer controlled ignition system as well as Crane or MSD capacitive discharged (CD) DIS ignition systems. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Secondary towers molded in high dielectric strength ACCEL Yellow. Packaged as single unit: 4 cyls require 1 coil pack, “”twin plug”” 4 cyls require 2 coil packs and 8 cyls require 2 coil packs. No tsuitable for some late 1999 applications.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Fd-487
- MSD 8241
Champion – Iridium Spark Plug: Maximum Performance, OE Replacement, RS12WYPB4 (Part No.9204)
from
$7.99
Champion® Iridium – the ultimate element. This spark plug’s fine-wire iridium center and platinum ground electrodes provide the sharpest spark focus for maximum performance.
Product Features:
See More
Product Features:
- Champion Iridium – Maximum Performance. Premium Spark Plug
- Iridium center electrode delivers maximum life
- Fine-wire center electrode and V-trimmed for greater ignitability
- V-trimmed ground electrode promotes sharper spark focus
- Maintains stable operating temperature under all engine loads
- Heat-Active┐ alloy allows electrodes to reach optimal temperature quickly
DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, ITV20TT (Part No.4719)
from
$10.99
Durability of an OE style plug combined with Power & Torque of high performance.
Product Features:
See More
Product Features:
- 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
- 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
- DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
- DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
- Durability of an OE style plug combined with Power & Torque of high performance.
- Withstands temperatures greater than 4000° Fahrenheit
- Iridium TT
ACDelco – Double Platinum Spark Plug: Original Equipment Replacement (Part No.41-950)
from
$9.79
ACDelco GM Original Equipment Double Platinum Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. With a copper core and double platinum pads on the center electrode, these plugs are designed to deliver long-lasting performance. ACDelco GM Original Equipment parts are the true OE parts installed during the production or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
Product Features:
See More
Product Features:
- One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life
- Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
- ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
- Copper Core: Designed with a copper core to provide excellent heat transfer and electrical conductivity.
- Conical Seat Type: Equipped with a conical seat type for a secure fit and optimal performance.
Motorcraft – Spark Plug (HJFS24FP) (Part No.SP-509)
from
$14.49
Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles engineered to meet strict Ford engineering standards to provide original equipment performance and reliability. Delivering performance, reliability and confidence, Motorcraft spa
Product Features:
See More
Product Features:
- Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
- Backed by Motorcraft’s Service Parts Warranty
- Exact fit for Ford, Lincoln and Mercury vehicles
- Resistant to oxidation and arc erosion.
- Multi-rib insulator protects against misfire.
- Service intervals of up to 100,000 miles.
- Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
- Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
- Motorcraft ignition components help prevent false check engine lights.
Champion – Copper Plus Spark Plug: Dependable Performance, OE Replacement, RS12YC (Part No.401)
from
$2.99
Dependable Performance, OE Replacement, RS12YC. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear. The Copper Plus design ensures dependable performance and durability, while the copper core center electrode allows for accurate control of heat range, extending the spark plug’s life. Built to ISO and SAE standards, it offers superior corrosion resistance and proven performance. The nickel center electrode tip and tapered seat type further enhance its reliability, making it an excellent choice for maintaining your engine’s efficiency.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance and Durability
- Copper core center electrode allows for accurate control of heat range for longer life
- Superior corrosion resistance
- Built to ISO and SAE standards for proven performance
- Built to ISO and SAE standards for proven performance
- Enhanced Conductivity and Heat Control: The Champion Copper Plus Spark Plug features a copper core electrode that provides increased conductivity and heat control, ensuring good overall wear and extending the spark plug’s life.
- Reliable Nickel Center Electrode Tip: Featuring a nickel center electrode tip and a tapered seat type, this spark plug enhances reliability and ensures optimal engine performance.
Bosch – Knock Sensor (Part No.0261231183)
from
$52.99
Bosch OE quality knock sensors for optimum engine protection and fuel consumption reduction up to 9%
Product Features:
See More
Product Features:
- Bosch OE quality knock sensors for optimum engine protection
- Bosch OE quality knock sensors improve combustion efficiency and reduce fuel consumption up to 9%
- Bosch OE quality knock sensors increase torque up to 5%
- Bosch OE quality knock sensors enable the use of multiple quality fuels with various anti-knock properties
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3884)
from
$49.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3798)
from
$55.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
NTK – Ignition Knock (Detonation) Sensor (Part No.ID0301)
from
$56.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
- NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
- The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3748)
from
$145.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3779)
from
$57.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Help – Spark Plug Boot (Part No.49818)
from
$24.49
Spark plug coil boot deteriorated or damaged? This replacement boot matches the fit and function of the original part on specified years, make and models. This boot is made from quality materials to resist damage from heat and oil saturation.
Product Features:
See More
Product Features:
- Ideal replacement – this spark plug coil boot directly replaces the boot on specified vehicle years, makes and models
- Durable construction – this spark plug coil boot is made from a tough rubber material that is resistant to damage from exposure to heat and oil saturation
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7169)
Motorcraft – Motorcraft Ignition Wire Set (Part No.F1020361158MTR)
from
$134.73
The Motorcraft Ignition wire set is a direct fit OEM replacement that guarantees the same performance and quality provided by the vehicle manufacturer.
Product Features:
See More
Product Features:
- OEM quality
- OEM connectors for easy Installation.
- Resistant to high temperatures, corrosion and vibration.
- Ignition noise suppressed.
- Reduces the chance of misfire
- Increases engine life
- Protects against wire set failure
Dorman – Help – Spark Plug Boot With Coil Wire Kit (Part No.49812)
from
$6.99
Spark plug coil boot deteriorated or damaged? This replacement boot matches the fit and function of the original part on specified years, make and models. This boot is made from quality materials to resist damage from heat and oil saturation.
Product Features:
See More
Product Features:
- Ideal replacement – this spark plug coil boot directly replaces the boot on specified vehicle years, makes and models
- Durable construction – this spark plug coil boot is made from a tough rubber material that is resistant to damage from exposure to heat and oil saturation
- Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life
- Trustworthy design – backed by team of product specialists in the United States
DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8100)
from
$129.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7087)
from
$11.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Carquest – Ignition Switch (Part No.CS287)
from
$27.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Copper alloy conductors ensure superior electrical conductivity with low resistive losses
- Our parts are 100% tested to verify both mechanical and electrical switching performance
- Robust design and high grade materials meet the stringent demands of today’s service professional
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest – Ignition Switch (Part No.CS804)
from
$70.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Copper alloy conductors ensure superior electrical conductivity with low resistive losses
- Our parts are 100% tested to verify both mechanical and electrical switching performance
- Robust design and high grade materials meet the stringent demands of today’s service professional
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Carquest Premium – Ignition Switch (Part No.CSA1045)
from
$28.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Switch (Part No.CSC1044)
from
$70.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Motorcraft – Original Equipment (O.E.) Switch Assembly – Ignition (Part No.SW-6958)
from
$83.99
The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.
Product Features:
See More
Product Features:
- Direct-fit, OE replacement parts – identical to factory installed parts. Robust design helps provide long operating life and excellent performance.
- All OE switch functions are maintained. Factory connectors help ensure a solid, positive connection. Provided factory mounting points ensure easy installation – new gaskets and attaching hardware is included, where applicable.
Motorcraft – Ignition Switch (Part No.M5050427791MTR)
from
$58.64
Ignition Switch
Popular 2018 Ford Expedition Ignition and Tune-Up Products Categories
2018 Ford Expedition Ignition and Tune-Up Products
You count on your 2018 Ford Expedition to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 18 Ignition and Tune-Up Products ranging in price from $5.99 to $83.99, you’re sure to find everything you need for your 2018 Ford Expedition.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 6 different brands like E3, Autolite, and DENSO. 2018 Ford Expedition Ignition and Tune-Up Products start as low as $5.99!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 944 extensive product reviews on 2018 Ford Expedition Ignition and Tune-Up Products.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2018 Ford Expedition below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 2018 Ford Expedition
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2018 Ford Expedition running right for years to come. In our inventory you’ll find brands like E3, Autolite, DENSO, and even more.
Popular Autolite Ignition and Tune-Up Products
You’ll find popular Autolite brand products across Spark Plugs. All are waiting to get your 2018 Ford Expedition back on the road. Some of the top-rated Autolite products in these categories are:
from
$6.49
(6)
Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life
Spark Plugs
from
$9.99
(40)
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
Top-Rated Ignition and Tune-Up Products
If are what you’re looking for, our inventory holds plenty. We stock brand Ignition and Tune-Up Products for your 2018 Ford Expedition, and some of our most reviewed parts include:
FAQs for 2018 Ford Expedition Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 2018 Ford Expedition?
Out of 18 Ignition and Tune-Up Products for the 2018 Ford Expedition, the most popular in our inventory are:
from
$10.99
(14)
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, ITV20TT
Spark Plugs
from
$14.99
This product is not rated
Ruthenium HX High Ignitability Spark Plug: PSPE Tip Design, LTR6BHX
Spark Plugs
from
$11.79
This product is not rated
Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, ITV20
Spark Plugs
