2018 Chevrolet Suburban 3500 HD Drivetrains

Essential 2018 Chevrolet Suburban 3500 HD Drivetrains

ACDelco – Differential Bearing (Part No.J7060366581ACD)

Differential Bearing

from

$137.90
Differential Bearing

Yukon Gear – Master Overhaul Kit For GM 9.25" IFS Differential, ’11 & Up (Part No.14170)

Master Overhaul Kit For GM 9.25" IFS Differential, '11 & Up

from

$932.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits 2011 and up GM 9.25″ IFS
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and silicone.
See More

SKF – PINION SEAL (Part No.J7010218383SKF)

PINION SEAL

from

$59.70
PINION SEAL

National – Trans Case Seal (Part No.711011)

Trans Case Seal

from

$45.49
Trans Case Seal

MTC – Differential Drain P (Part No.J7065587755MTC)

Differential Drain P

from

$11.58
Differential Drain P

Driveworks – Tapered Roller Bearing (Part No.S-HM-807010)

Tapered Roller Bearing

from

$17.29
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Driveworks – Tapered Roller Bearing (Part No.S-3920)

Tapered Roller Bearing

from

$14.79
Product Features:
  • Brand may vary by location
See More

Dorman – Help – U-Joint Repair Kit (Part No.81001)

U-Joint Repair Kit

from

$11.49
This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
  • Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – 4WD Front Differential Actuator (Part No.600-118)

4WD Front Differential Actuator

from

$205.99
This 4WD actuator directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:
  • Direct replacement – this 4WD axle actuator directly replaces the original equipment part on specific vehicle years, makes and models
  • Effective fix – installation addresses inoperative four-wheel drive caused by failed original actuator
  • Smart solution – delivers reliable fit and function for competitive price
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

Dorman – Front Drive Shaft (Part No.938-025)

Front Drive Shaft

from

$621.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

National – Shaft Repair Sleeve (Part No.99210)

Shaft Repair Sleeve

from

$47.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Driveworks – Clutch Release Bearing (Part No.S-B-2610)

Clutch Release Bearing

from

$15.99
Product Features:
  • Brand may vary by location
See More

Dorman – 4WD Transfer Case Motor Assembly (Part No.600-899)

4WD Transfer Case Motor Assembly

from

$385.99
Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.

Product Features:
  • Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications
  • Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion
  • 100% new – this transfer case motor is entirely new, not remanufactured like competitors
  • Quality assured – vehicle-specific application has been validation tested to ensure quality
See More

Cardone – Transfer Case Motor (Part No.48-121)

Transfer Case Motor

from

$275.99
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

Product Features:
  • All motors are 100% torque tested to ensure strength for proper gear engagement.
  • Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
  • Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
  • Motor magnets are 100% recharged for superior performance and reliability.
  • Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.235)

Greaseable Super Strength Universal Joint

from

$34.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

Driveworks – Universal Joint (Part No.DW-534G)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging to provide higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting allows for easy maintenance and the flexible use of the entire assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals are applied to optimize grease retention and reduce contamination
See More

Dorman – Flanged Hex Spindle Nut M27-2.0 Hex Size 34mm (Part No.615-144.1)

Flanged Hex Spindle Nut M27-2.0 Hex Size 34mm

from

$12.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Flanged Hex Spindle Nut M27-2.0 Hex Size 34mm (sold by each) (Part No.615-144)

Flanged Hex Spindle Nut M27-2.0 Hex Size 34mm (sold by each)

from

$13.29
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802011)

Tapered Roller Bearing

from

$10.49
Product Features:
  • Brand may vary by location
See More

Driveworks – Taper Bearing Cup (Part No.S-HM-88610)

Taper Bearing Cup

from

$6.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Felpro – Axle Housing Cover Gasket (Part No.RDS 55486)

Axle Housing Cover Gasket

from

$15.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

GM Genuine Parts – Rear Axle Shaft Seal (Part No.291-336)

Rear Axle Shaft Seal

from

$59.99
GM Genuine Parts Axle Shaft Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help keep dirt and water out of your axle shaft assembly and seal in lubricant. They conform to the rotating surface to help provide leak-free operation. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps keep dirt and water out of your axle shaft assembly
  • Conforms to the rotating surface to help provide leak-free operation
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Axle Seal (Part No.K4021429877ACD)

Axle Seal

from

$18.41
Axle Seal

GM Genuine Parts – Front Wheel Bearing Seal (O-Ring) (Part No.290-303)

Front Wheel Bearing Seal (O-Ring)

from

$4.99
GM Genuine Parts Engine Coolant Outlet O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

2018 Chevrolet Suburban 3500 HD Drivetrains

You count on your 2018 Chevrolet Suburban 3500 HD to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 44 Drivetrains ranging in price from $4.99 to $932.99, you’re sure to find everything you need for your 2018 Chevrolet Suburban 3500 HD.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 14 different brands like Valvoline, Moog, and Driveworks. 2018 Chevrolet Suburban 3500 HD Drivetrains start as low as $4.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 3,716 extensive product reviews on 2018 Chevrolet Suburban 3500 HD Drivetrains. Some of the top-rated Drivetrains products we carry are Ring and Pinion Bearing Installation Kit with 3.8 stars and Non-Greaseable Super Strength Universal Joint with 4.4 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 2018 Chevrolet Suburban 3500 HD below to get started!

Top-Rated Drivetrains Brands For Your 2018 Chevrolet Suburban 3500 HD

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2018 Chevrolet Suburban 3500 HD running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.

Popular Valvoline Drivetrains

You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 2018 Chevrolet Suburban 3500 HD back on the road. Some of the top-rated Valvoline products in these categories are:

FAQs for 2018 Chevrolet Suburban 3500 HD Drivetrains

What are the most purchased Drivetrains for the 2018 Chevrolet Suburban 3500 HD?

Out of 44 Drivetrains for the 2018 Chevrolet Suburban 3500 HD, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $26.99
(89)
Greaseable Premium Universal Joint
U-Joints
Universal Joint
from $15.99
(52)
Universal Joint
U-Joints
Greaseable Super Strength Universal Joint
from $34.99
(48)
Greaseable Super Strength Universal Joint
U-Joints

What are the top-rated 2018 Chevrolet Suburban 3500 HD Drivetrains?

Top-rated Drivetrains for your 2018 Chevrolet Suburban 3500 HD based on customer reviews/ratings are:
Ring and Pinion Bearing Installation Kit
from $282.99
(255)
Ring and Pinion Bearing Installation Kit
“good price”
Non-Greaseable Super Strength Universal Joint
from $32.99
(22)
Non-Greaseable Super Strength Universal Joint
“Used in drI’ve shaft”
Universal Joint
from $15.99
(9)
Universal Joint
“Fits perfect. If your changing OE GM ujoints, have fun.”