2018 Chevrolet Express 4500 Fuel and Emissions Systems
Find Your Specific 2018 Chevrolet Express 4500 Fuel and Emissions Systems
Below you will find various in-demand Chevrolet Fuel and Emissions Systems, components and accessories for your 2018 Express 4500. Advance Auto Parts has popular Express 4500 parts like Air Flow Sensors, Fuel Injectors, Fuel Tanks and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Express 4500 model years including
2013,
2014,
2015,
2016,
2017,
2019,
2020,
2021,
2022 and more. Select a category of 2018 Chevrolet Express 4500 Fuel and Emissions Systems below and start saving instantly.
Popular 2018 Chevrolet Express 4500 Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 2018 Chevrolet Express 4500s
Carquest Premium – New MAP SENSOR (Part No.ECE1033)
from
$63.99
The Premium CarQuest Vehicle Solutions line is designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Relief Valve is used in the automotive air conditioning system to prevent unusual over-pressure that may cause damage to critical components within the system or to the system as a whole. By opening it’s valve when the system pressure exceeds the preset pressure levels and closing when the internal pressure decreases to the preset pressure levels, proper factory designated system pressures are maintained.
Product Features:
See More
Product Features:
- Made to OE spec to ensure a proper fit, form and function.
- Sensors are engineered for precision performance, durability and a long service life.
- All units are tested using advanced end-of-line testing equipment that pressurizes the A/C Pressure Relief Valve and checks functionality to ensure each A/C Pressure Relief Valve meets manufacturing specifications before packaging.
Carquest Premium – Vapor Canister Vent Valve: Includes Mounting Hardware (Part No.CPA1302)
from
$33.99
Ensure that your vehicle’s emission control system performs at its best with Carquest premium Vapor Canister Vent Valves. Manufactured for long-lasting performance, these Vent Valves provide reliable operation and help maintain your vehicle’s compliance with environmental regulations. For cleaner emissions, optimal vehicle efficiency and perfomance, trust Carquest Vapor Canister Vent Valves.
Product Features:
See More
Product Features:
- Provides closure for the EVAP system (normally vented) during OBD II test cycle
- Includes integrated filter, where applicable, that captures contaminants and particulates from incoming air, preventing clogging and ensuring clean airflow
- Quick valve response to engine demands, ensuring efficient venting of vapors and optimizing overall engine performance
- Meets or exceeds all OEM specifications
Dorman – Fuel Tank O-Ring (Part No.911-245)
from
$44.99
This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles
- Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service
- Durable construction – recommended for replacement when the fuel pump or sensor is replaced
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
GM Genuine Parts – Vapor Canister Vent Hose (Part No.25815739)
from
$115.99
GM Genuine Parts Vapor Canister Vent Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6230)
from
$128.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.
Product Features:
See More
Product Features:
- CARQUEST MAF use all new high-quality components at the highest quality standards.
- Manufactured with new and advanced technology to perform, fit and function at OE specifications.
- All new product that is tested with OEM equipment to OEM standards
- Outperforms competition when tested in extreme environmental conditions
Dorman – Evaporative Emissions Charcoal Canister (Part No.911-095)
from
$226.99
As part of the Evap system, it stores fuel vapors from the gas tank and sends them to the engine for combustion. Replacement controls hydrocarbon emissions from escaping.
Product Features:
See More
Product Features:
- Direct replacement – this evaporative emissions charcoal canister matches the function and performance of the original canister on specified vehicles
- Restores performance – properly repairs issues with emissions controls to clear check engine light and pass inspection
- Application specific – reverse engineered from the original design on certain vehicle years, makes and models
- Trustworthy quality – backed by team of engineers and quality specialists in the United States
Spectra Premium – Fuel Tank Straps (Part No.ST397)
from
$60.99
Fuel Tank Straps
GM Genuine Parts – Fuel Tank Lock Ring (Right) (Part No.TR26)
from
$14.99
GM Genuine Parts Fuel Tank Sender Retainers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These retainers help align and secure your vehicle’s fuel tank sender. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Help align and secure fuel tank sender
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECA1048)
from
$67.99
Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Dorman – Help – Fuel Tank Strap Hardware Kit (Part No.55157)
from
$13.99
This fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles
- Recommended replacement for the original hardware when servicing or replacing the fuel tank
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61824)
from
$15.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
GM Genuine Parts – Barometric Pressure Sensor (Part No.19418812)
from
$129.99
GM Genuine Parts Multi Purpose Pressure Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Dorman – Evaporative Emissions Canister Vent Valve (Part No.911-516)
from
$47.99
A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.
Product Features:
See More
Product Features:
- Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation
- Quality construction – manufactured from premium materials for a long service life
- Excellent value – original equipment function at a lower price
- Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance
Dorman – Help – Vacuum Storage Canister (Part No.47083)
from
$29.99
This vacuum reservoir is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this vacuum reservoir is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this reservoir is a reliable replacement for an original part that is missing or damaged
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Bosch – Oxygen Sensor: 4 Wire, 19.88" Long, Heated, Exact Fit (Part No.15283)
from
$115.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Dorman – Fuel Pump Lock Ring (Part No.579-102)
from
$19.49
A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part
- Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank
- Durable construction – manufactured from quality materials for superior service and reliability
- Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience
GM Genuine Parts – Fuel Injector Assembly (Part No.97780360)
from
$578.99
ACDelco GM Original Equipment Remanufactured Fuel Injectors are GM-recommended replacements for your vehicle’s original components. They are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion. The engine control module (ECM) operates the injectors by applying an electric current to the injector solenoid winding – this causes the needle valve to open, allowing pressurized fuel to be atomized into the intake airstream. Remanufacturing the fuel injector is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and completed units are tested to help ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. These fuel injectors will provide the same performance, durability, and service life you expect from ACDelco.
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
- Allows for a quick throttle response
- Assists in cold engine starts
GM Genuine Parts – Vapor Canister Purge Valve (Part No.214-1680)
from
$68.99
Vapor Canister Purge Valves are GM-recommended replacements for your vehicle’s original components. The purge valve controls the flow of fuel vapor from the vapor canister to the intake manifold. These original equipment vapor canister purge valves have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Controls vapor flow from canister to engine
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Felpro – Fuel Injector O-Ring Kit (Part No.ES 73201)
from
$36.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
GM Genuine Parts – Fuel Tank Pressure Sensor Cover (Part No.20893611)
from
$4.99
GM Genuine Parts Fuel Pressure Sensor Covers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Multi-Purpose Wire Connector (Part No.PT2784)
from
$37.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – Multi-Purpose Pigtail (Part No.PT1799)
from
$54.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – Fuel Injector Retainer Kit with Clip (Part No.12570620)
from
$13.79
GM Genuine Parts Fuel Injector and Insulator Retainer Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Fuel Injector (Part No.19210900)
from
$471.99
ACDelco GM Original Equipment Fuel Injector Kits contain the necessary parts to service a fuel injector, and are GM-recommended replacements for your vehicle’s original components. The fuel injector atomizes the fuel with the air entering the engine cylinder to form a combustible mixture. These original equipment fuel injector kits have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
- Allows for a quick throttle response
- Assists in cold engine starts
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT288)
from
$59.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – Fuel Injection Fuel Rail Bolt (Part No.12554211)
from
$9.99
GM Genuine Parts Studs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Fuel Pump O-Ring (Part No.G41)
from
$13.99
GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Upgrade your 2018 Chevrolet Express 4500 with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2018 Chevrolet Express 4500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Express 4500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 39 Fuel and Emissions Systems for the 2018 Chevrolet Express 4500, designed to meet your needs without breaking the bank.
From
Air Flow Sensor
replacements to
Fuel Injectors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2018 Chevrolet Express 4500 at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $4.99 to $2,754.99, with
an average price of $138.83.
Our 39 Fuel and Emissions Systems in stock come from 10 trusted brands, so you’re sure to find the right part for your 2018 Chevrolet Express 4500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 Chevrolet Express 4500, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names
like FELPRO, GM Genuine, Carquest Premium, and more.
FELPRO Fuel and Emissions Systems
start at just $14.99 and boast an impressive 4.6 stars average rating from customers.
GM Genuine and Carquest Premium also bring quality to the table, with Fuel and Emissions Systems available starting at $16.99, and at an average 4.5 stars rating.
With 247 customer reviews and counting, our 2018 Chevrolet Express 4500 Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2018 Chevrolet Express 4500 is always ready to roll. We’re committed to providing you with everything you need to keep your Express 4500 in top shape, all in one place.
Start shopping confidently below for your 2018 Chevrolet Express 4500!
Best-Selling Air Flow Sensors for 2018 Chevrolet Express 4500s
Enhance the driving experience in your Chevrolet with 3 quality Air Flow Sensor components, starting at $54.99.
Delphi – Manifold Absolute Pressure Sensor (Part No.PS10247)
from
$61.99
Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.
Product Features:
See More
Product Features:
- Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
- Internally protected against moisture intrusion and vibration
- Long lasting and durable
- Designed and engineered with Delphi expertise
Carquest Premium – New MAP SENSOR (Part No.ECE1033)
from
$63.99
The Premium CarQuest Vehicle Solutions line is designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Relief Valve is used in the automotive air conditioning system to prevent unusual over-pressure that may cause damage to critical components within the system or to the system as a whole. By opening it’s valve when the system pressure exceeds the preset pressure levels and closing when the internal pressure decreases to the preset pressure levels, proper factory designated system pressures are maintained.
Product Features:
See More
Product Features:
- Made to OE spec to ensure a proper fit, form and function.
- Sensors are engineered for precision performance, durability and a long service life.
- All units are tested using advanced end-of-line testing equipment that pressurizes the A/C Pressure Relief Valve and checks functionality to ensure each A/C Pressure Relief Valve meets manufacturing specifications before packaging.
GM Genuine Parts – Multi-Purpose Pigtail (Part No.PT1799)
from
$54.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Most Popular 2018 Chevrolet Express 4500 Fuel Injectors
Customize your Chevrolet with 10 Fuel Injectors products
like Air Flow Meters and Mass Air,
Fuel Injectors, and
Fuel Injector Gaskets, all
priced under $2,754.99.
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61469)
from
$14.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Fuel Injector Seal Kit (Part No.AS053)
from
$7.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
ACDelco – Sequential Multi-Port Fuel Injector Assembly (Part No.217-3412)
from
$61.99
ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
- Allows for a quick throttle response
- Assists in cold engine starts
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Remanufactured Fuel Injector (Part No.A211-2183)
from
$54.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Felpro – Fuel Injector O-Ring Kit (Part No.ES 73217)
from
$27.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
GM Genuine Parts – Fuel Injector Retainer Kit with Clip (Part No.12570620)
from
$13.79
GM Genuine Parts Fuel Injector and Insulator Retainer Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Mass Airflow Sensor (Part No.23324767)
from
$145.99
GM Genuine Parts Mass Air Flow (MAF) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are key parts of the engine management system, and are GM-recommended replacements for your vehicle’s original components. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This helps ensure the most efficient air/fuel mixture for the best fuel economy and power. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Multi-Port Fuel Injector O-Ring Kit with 16 O-Rings (Part No.217-3092)
from
$41.99
GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps provide a seal to prevent fuel leaks
- Helps seal combustion chamber from the elements
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Edelbrock – Pro-Flo 4 EFI XT-Style Kit No. 35733 For Chevrolet LS Gen III/IV (Part No.35733)
from
$2754.99
The Edelbrock Pro-Flo 4 XT Sequential Port EFI Kit No. 35733 for Chevrolet LS GEN III/IV engines is equipped with the latest in technology and features. The EFI system comes complete with a Pro-Flo XT cathedral port black finish intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i. fuel pressure. The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU. It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection. We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for. The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations. The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance of your engine. E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals and performance.The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet.
See More
Delphi – Mass Air Flow Sensor (Part No.AF10682)
from
$150.46
Mass Air Flow Sensor
Top Picks for 2018 Chevrolet Express 4500 Fuel Tanks
Upgrade Chevrolet Express 4500s with top-quality Fuel Tanks parts, including 7 OEM and aftermarket selections for your 2018 model.
Carquest Premium – Fuel Tank Lock Ring LO1582926 (Part No.LO1582926)
from
$16.99
Carquest Premium offers a complete line of fuel tank lock rings covering a wide variety of North American vehicle applications. Carquest Premium fuel tank lock rings are engineered to meet or exceed all OEM specifications. Carquest Premium fuel tank lock rings are precision stamped and are treated with a rust proof finish to ensure durability and strength.
Product Features:
See More
Product Features:
- Engineered to meet or exceed all OEM specifications
- Precision stamped and are treated with a rust proof finish to ensure durability and strength
Dorman – Help – Fuel Tank Strap Hardware Kit (Part No.55157)
from
$13.99
This fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles
- Recommended replacement for the original hardware when servicing or replacing the fuel tank
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
GM Genuine Parts – Fuel Tank Lock Ring (Right) (Part No.TR26)
from
$14.99
GM Genuine Parts Fuel Tank Sender Retainers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These retainers help align and secure your vehicle’s fuel tank sender. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Help align and secure fuel tank sender
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Dorman – Fuel Tank O-Ring (Part No.911-245)
from
$44.99
This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles
- Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service
- Durable construction – recommended for replacement when the fuel pump or sensor is replaced
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
GM Genuine Parts – Fuel Pump O-Ring (Part No.G41)
from
$13.99
GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Dorman – Fuel Pump Lock Ring (Part No.579-102)
from
$19.49
A recommended replacement whenever the sending unit is serviced, this fuel tank lock ring is a direct match for the original part. Designed for a secure fit, it’s manufactured from durable materials for reliable service.
Product Features:
See More
Product Features:
- Direct replacement – this fuel tank lock ring matches the fit, function and performance of the original part
- Ideal solution – recommended for replacement whenever the sending unit is serviced to ensure a secure connection to the fuel tank
- Durable construction – manufactured from quality materials for superior service and reliability
- Trustworthy design – backed by a team of product designers and engineers with over 100 years of automotive aftermarket experience
Spectra Premium – Fuel Tank Straps (Part No.ST397)
from
$60.99
Fuel Tank Straps
In-Demand Oxygen Sensors for 2018 Chevrolet Express 4500s
Select from 5 premium Oxygen Sensors parts for your 2018 Chevrolet Express 4500, with prices ranging from $53.99 to $106.99.
Bosch – Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal (Part No.15741)
from
$72.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
GM Genuine Parts – Heated Oxygen Sensor (Part No.12657188)
from
$79.99
GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Detects oxygen content in the exhaust gases to help optimize emissions
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
NTK – Switching Oxygen Sensor: 4 Wire, 13.25" Long, Heated, Direct Fit (Part No.21075)
from
$53.99
NGK is the sensor specialist for import and domestic applications. Established under the NGK product family, oxygen sensors are part of our ongoing commitment to streamlining product types and increasing coverage. A ceramic company at our core, uses cutting-edge technology to control the ceramic used in our oxygen sensors from raw material to finished product. is the world’s largest supplier and manufacturer of OE oxygen sensors. Combining expertise and innovation, oxygen sensors deliver superior fit, form, and function. oxygen sensors undergo extensive testing during manufacturing to ensure quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for comprehensive market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
GM Genuine Parts – Heated Oxygen Sensor (Part No.12666612)
from
$106.99
GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
- Detects oxygen content in the exhaust gases to help optimize emissions
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
NTK – Switching Oxygen Sensor: 4 Wire, Heated, Direct Fit (Part No.21097)
from
$92.99
NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Most Sold 2018 Chevrolet Express 4500 Vapor Canister Purge Valves
Explore our best-selling Chevrolet parts for the 2018 Express 4500 among 6 OEM and aftermarket options starting from $39.99.
GM Genuine Parts – Vapor Canister Vent Solenoid (Part No.214-2324)
from
$39.99
GM Genuine Parts Vapor Canister Vent Solenoids are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These solenoids communicate with the valve to open and close, allowing air to pass in and out of the vapor canister vent. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Controls fresh air flow to the canister
- Sends fuel vapors to the engine for re-burn
- Helps control fuel tank pressure
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Vapor Canister (Part No.215-608)
from
$269.99
GM Genuine Parts Vapor Canisters are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These canisters capture and store evaporating fuel vapors from the fuel tank to be drawn into the intake manifold during engine operation. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps reduce harmful pollutants from entering the atmosphere
- Captures fuel vapors to be re-burned in the engine
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
GM Genuine Parts – Vapor Canister Purge Valve (Part No.214-1680)
from
$68.99
Vapor Canister Purge Valves are GM-recommended replacements for your vehicle’s original components. The purge valve controls the flow of fuel vapor from the vapor canister to the intake manifold. These original equipment vapor canister purge valves have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Controls vapor flow from canister to engine
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Dorman – Evaporative Emissions Charcoal Canister (Part No.911-095)
from
$226.99
As part of the Evap system, it stores fuel vapors from the gas tank and sends them to the engine for combustion. Replacement controls hydrocarbon emissions from escaping.
Product Features:
See More
Product Features:
- Direct replacement – this evaporative emissions charcoal canister matches the function and performance of the original canister on specified vehicles
- Restores performance – properly repairs issues with emissions controls to clear check engine light and pass inspection
- Application specific – reverse engineered from the original design on certain vehicle years, makes and models
- Trustworthy quality – backed by team of engineers and quality specialists in the United States
Carquest Premium – Vapor Canister (Part No.CPN1592)
from
$182.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
GM Genuine Parts – Vapor Canister Vent Hose (Part No.25815739)
from
$115.99
GM Genuine Parts Vapor Canister Vent Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Top-Rated Fuel and Emissions Systems Brands For Your 2018 Chevrolet Express 4500
Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2018 Chevrolet Express 4500s. Below you’ll find some of our best rated Fuel and Emissions Systems from FELPRO, GM Genuine, and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2018 Express 4500 start at just $14.99 and are rated as high as 4.6 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 2018 Chevrolet Express 4500 Fuel and Emissions Systems
When it comes to maintaining or upgrading your 2018 Chevrolet Express 4500, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Fuel and Emissions Systems, specifically designed for the 2018 Chevrolet Express 4500. With over 1 FELPRO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99. Plus, with over 3 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular GM Genuine 2018 Chevrolet Express 4500 Fuel and Emissions Systems
GM Genuine auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2018 Chevrolet Express 4500 owner should feel confident when installing genuine GM Genuine parts in their vehicle. To ensure the best fit and performance for your 2018 Express 4500, Advance Auto Parts carries a full inventory of 3 GM Genuine Fuel and Emissions Systems. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these GM Genuine Fuel and Emissions Systems range from $39.99 to $269.99, plus, with more than 20 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.
from
$39.99
(1)
Vapor Canister Vent Solenoid
“01 Impala needed vent valve solenoid due to the stock one checking bad. Quality AC Delco part fit perfect and solved problem.”
FAQs for 2018 Chevrolet Express 4500 Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 2018 Chevrolet Express 4500s?
Out of 39 Fuel and Emissions Systems that fit 2018 Chevrolet Express 4500s, the following parts are the top sellers:
- Vapor Canister Purge Valve (18057381) – $68.99
- Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal (11410320) – $72.99
- Vapor Canister Purge Solenoid: Includes Mounting Hardware (12448061) – $41.99
What’s the price range for 2018 Chevrolet Express 4500 Fuel and Emissions Systems?
Fuel and Emissions System prices for the 2018 Chevrolet Express 4500 start at $4.99 and go up to $2,754.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 2018 Chevrolet Express 4500?
The average price for Fuel and Emissions Systems for the 2018 Chevrolet Express 4500 is $138.83. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other Chevrolet Express 4500 model years?
What are the cheapest Fuel and Emissions Systems for my 2018 Chevrolet Express 4500?
The cheapest 2018 Chevrolet Express 4500 Fuel and Emissions Systems we carry in stock are:
- Fuel Tank Pressure Sensor Cover (12111389) – $4.99
- Fuel Injector Seal Kit (11692630) – $7.99
- Fuel Injection Fuel Rail Bolt (12113406) – $9.99
- Fuel Injector Retainer Kit with Clip (12151905) – $13.79
- Fuel Tank Strap Hardware Kit (22148579) – $13.99
What are the top-rated Fuel and Emissions Systems that fit the 2018 Chevrolet Express 4500?
Out of 247 reviews by customers, our 2018 Chevrolet Express 4500 Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2018 Chevrolet Express 4500 and their top-rated products:
- Vapor Canister Purge Valves
- Vapor Canister Vent Solenoid (11680466) – $39.99
- Vapor Canister (15730288) – $269.99
- Vapor Canister Purge Valve (18057381) – $68.99
What types of Fuel and Emissions Systems do you sell for my 2018 Chevrolet Express 4500?
As of 11/2/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2018 Chevrolet Express 4500:
Can I get help with 2018 Chevrolet Express 4500 Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Fuel and Emissions Systems and more.
What is your return policy for Chevrolet Express 4500 Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new Chevrolet Express 4500 Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
