from

$719.99

This transmission control module has been fully tested and validated to match the function and performance of the original TCM on specified vehicle applications.

Product Features:

Direct replacement – this transmission control module matches the function and performance of the stock TCM on specified years, makes and models
Ideal solution – this transmission control module is a reliable replacement for an original part that has failed due to corrosion or electrical failure
Thoroughly tested – this TCM has undergone full vehicle simulator testing to confirm full functionality for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$218.99

GM Genuine Parts Transmission Control Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules help control shifting in vehicles with automatic transmissions. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Dictates the operation of your vehicle’s vital systems, which is critical to the performance of your vehicle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$17.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$9.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$16.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$30.99

ACDelco GM Original Equipment ABS Wheel Speed Sensors are located at each wheel, monitoring the rotation of each wheel, and are GM-recommended replacements for your vehicle’s original components. The sensor provides this speed information to the antilock brake control module for the antilock braking function. These sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Restores ABS function and performance caused by failed wheel speed sensor
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured with GM Original Equipment specification for fit, form, and function

from

$15.99

Carquest Premium anti-lock brake system (ABS) wheel speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium ABS sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each ABS sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium ABS sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
O-rings or seals are included (where applicable)
Weather-tight connectors prevent leaks and corrosion for longer life
Includes all necessary brackets and grommets for easier installation
Extensive design validation testing and 100% end-of-line tested
Fluorocarbon high-temperature o-ring seals coated with lubricant for easy installation prevents hub contamination.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$67.99

Carquest Premium vehicle speed sensors are designed to perform in harsh environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium vehicle speed sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each vehicle speed sensor undergoes extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium speed sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
O-rings or seals are included (where applicable)
Magnet size and strength optimized for precise signal output.
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$26.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -30 Deg. F to 325 Deg. F / -34 Deg. C to 163 Deg. C
Superior thermal and chemical resistance
Good abrasion and dry running capability
Delivers quality and reliable performance for every type of repair

from

$21.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$4.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: springless; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$6.49

Product Features:

Brand may vary by location

from

$62.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$34.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$75.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$49.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$24.79

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS — Precision manufactured using high-quality materials for durability and performance
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$2816.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2563.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$2559.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$2816.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2563.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$2563.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$2559.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$2706.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2816.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2559.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

2018 Chevrolet Cruze Transmission Parts

Dorman – Remanufactured Transmission Electro-Hydraulic Control Module (Part No.609-015)

GM Genuine Parts – Transmission Control Module (Part No.24279973)

National – Automatic Transmission Torque Converter Seal (Part No.710889)

National – Multi-Purpose Seal (Part No.3543)

National – Multi-Purpose Bearing (Part No.A-4)

GM Genuine Parts – Wheel Speed Sensor (Part No.13470643)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC4337)

Carquest Premium – Automatic Transmission Speed Sensor (Part No.SNA1105)

National – Automatic Transmission Output Shaft Seal (Part No.710709)

National – Automatic Transmission Output Shaft Seal (Part No.711037)

National – Multi-Purpose Seal (Part No.710544)

Driveworks – Auto Transmission Manual Shaft Seal (Part No.S-221207)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-568)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-589)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-555)

Dorman – Transmission Oil Cooler Pressure Line (Part No.624-586)

National – Multi-Purpose Bearing (Part No.30206)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T6T40E1411CFW)

Moveras – 6T35 – Automatic Transmission (Part No.M02186)

Moveras – 6T40 – Automatic Transmission (Part No.M02198)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T6T40E1412JSW)

Moveras – 6T30 – Automatic Transmission (Part No.M02191)

Moveras – 6T40 – Automatic Transmission (Part No.M01928)

Moveras – 6T40 – Automatic Transmission (Part No.M02179)

Shift Pro by ETE – 6T40 Automatic Transmission Assembly (Part No.T281540)

Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T6T40E1412JFW)

Moveras – 6T40 – Automatic Transmission (Part No.M02195)

National – Automatic Transmission Output Shaft Seal (Part No.710709)

National – Multi-Purpose Seal (Part No.3543)

National – Multi-Purpose Seal (Part No.710544)

National – Multi-Purpose Bearing (Part No.A-4)

National – Multi-Purpose Bearing (Part No.30206)

GM Genuine Parts – Vehicle Speed Sensor (Part No.55568130)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC4337)

Dorman – Transmission Oil Cooler Pressure Line (Part No.624-587)

Dorman – Transmission Oil Cooler Pressure Line (Part No.624-586)

Moveras – 6T40 – Automatic Transmission (Part No.M02198)

GM Genuine Parts – Transmission Control Module (Part No.24279973)