2018 BMW 650i xDrive Gran Coupe Fuel and Emissions Systems
More 2018 BMW 650i xDrive Gran Coupe Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 2018 BMW 650i xDrive Gran Coupe, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 2018 BMW 650i xDrive Gran Coupe Fuel and Emissions Systems
Delphi – Fuel Pump Module Assembly (Part No.FG1692)
from
$521.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
aFe POWER – Sprint Booster (Part No.77-16304)
from
$297.99
Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.
Product Features:
See More
Product Features:
- Reduces Throttle Response Time
- Improves Acceleration
- Easy To Install
- Does Not Affect The Vehicles Electronic System
NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 18.8" Long, Heated, Direct Fit (Part No.24365)
from
$196.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Bosch – Air Mass Sensor for Precise Engine Performance, OEM Quality (Part No.B3150658147BOS)
from
$126.21
Bosch air mass sensors are built to exacting specifications as required for such a sensitive measuring device. Through a precise manufacturing process, the correct type and thickness of platinum wire or thick film ceramic measuring elements are selected and accurately calibrated to provide optimum performance.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Measurement of air mass (gas mass) through-flow per unit of time, independent of density and temperature
- Extensive measuring range
- Highly sensitive, particularly for small changes in flow rate
- Wear-free since there are no moving parts
- Insensitive to dirt and contamination
- Utilizes the factory style mounts, connectors and fittings
- Provides exceptional reliability
Bosch – Mass Air Flow (MAF) Sensor (Part No.0280218270)
from
$165.99
Bosch is the actual OE manufacture, plus or minus 5% deviation from OE specification can set a check engine light
Product Features:
See More
Product Features:
- OE Technology provides the correct function and calibration to ensure trouble-free operation and emission compliance.
- 100% new product
- Not re-manufactured or rebuilt
- Sensor and housing are calibrated and sold together ensuring precise sensor reading and optimal engine performance
- Guaranteed to match vehicle requirements for performance, drivability, fuel economy and emissions
- Can provide up to 20 percent better fuel consumption
Rein – OE Quality Automotive Fuel Tank Cap (Part No.E2010379639RIN)
from
$40.83
This is an OE quality fuel cap. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.
Product Features:
See More
Product Features:
- Original Equipment fit, form and function
- Manufactured from high quality materials
- Right fit the first time
- O ring is black in color
- For European vehicles
Rein – Cap-Fuel (Part No.CPF0031)
Bosch – Direct Injection Fue (Part No.E3027799755BOS)
from
$321.80
Direct Injection Fue
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Vaico – Fuel Pump Control Mo (Part No.E3006849427VCO)
from
$490.11
Fuel Pump Control Mo
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1098)
from
$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Original Equipment – AMBIENT TEMP SENSOR (Part No.P4025449414OEA)
from
$51.91
AMBIENT TEMP SENSOR
Carquest Premium – Fuel Cap Tester Adapter (Part No.12426)
from
$43.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Carquest Premium – Manifold Absolute Pressure Sensor (Part No.ECC1615)
from
$116.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Bosch – Fuel Injector Seal (Part No.C1010406080BOS)
from
$5.97
Fuel Injector Seal
Carquest Premium – Fuel Injector Seal Kit (Part No.AS067)
from
$6.49
CARQUEST fuel injector seal kits include the necessary o-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials.
- Services one injector.
Bosch – Oxygen Sensor: 4 Wire, 21.34" Long, Heated, Exact Fit (Part No.15167)
from
$143.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Bosch – Oxygen Sensor (Part No.C50101539658BOS)
from
$112.14
The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- OE Style connectors and wire lengths.
- Base ceramic probe of Zirconium and Yttrium.
- Patented Platinum Power Grid.
Bosch – Wideband Oxygen Sensor: 5 Wire, 27.95" Long, Heated, Exact Fit (Part No.17187)
from
$203.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Advanced Wideband sensing element for exact air/fuel measurement
- Robust sensor design increases sensor longevity
- Seared protection tube due to 100% functional quality test
- ‘True Direct-fit’ OE connectors and harness
- Pre-coated threads with anti-seize compound right out of the box
Bosch – Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (Part No.15733)
from
$80.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Includes Smart Link Connector, no soldering required
- No special tools required for installation
- Seared protection tube due to 100% functional quality test
- Performance meets or exceeds OE specifications
NTK – Switching Oxygen Sensor: 4 Wire, 21.75" Long, Heated, Direct Fit (Part No.25676)
from
$121.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
DENSO – Oxygen Sensor: Downstream, 4 Wire, 21.57" Long, Heated, Exact Fit (Part No.234-4876)
from
$155.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Bosch – Port Fuel Injector: For Enhanced Engine Performance (Part No.C1000427370BOS)
from
$126.22
Port Fuel Injection (PFI) is the world’s most widely used system for internal combustion engines and offers many advantages for engines with a low pressure output.
Product Features:
See More
Product Features:
- Low-pressure systems are less complex and more affordable than high-pressure systems
- Robust combustion process tolerates lower-quality fuel
- Maintenance-friendly design reduces the overhead for system diagnostics
Carquest Premium – REMAN FUEL INJECTOR (Part No.A512-1335)
from
$231.99
REMAN FUEL INJECTOR
Popular 2018 BMW 650i xDrive Gran Coupe Fuel and Emissions Systems Categories
2018 BMW 650i xDrive Gran Coupe Fuel and Emissions Systems
You count on your 2018 BMW 650i xDrive Gran Coupe to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 25 Fuel and Emissions Systems ranging in price from $5.97 to $577.54, you’re sure to find everything you need for your 2018 BMW 650i xDrive Gran Coupe.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 11 different brands like Bosch, Carquest Premium, and Delphi. 2018 BMW 650i xDrive Gran Coupe Fuel and Emissions Systems start as low as $5.97!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 182 extensive product reviews on 2018 BMW 650i xDrive Gran Coupe Fuel and Emissions Systems.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 2018 BMW 650i xDrive Gran Coupe below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 2018 BMW 650i xDrive Gran Coupe
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2018 BMW 650i xDrive Gran Coupe running right for years to come. In our inventory you’ll find brands like Bosch, Carquest Premium, Delphi, and even more.
Popular Rein Fuel and Emissions Systems
You’ll find popular Rein brand products across Gas Caps. All are waiting to get your 2018 BMW 650i xDrive Gran Coupe back on the road. Some of the top-rated Rein products in these categories are:
Top-Rated Fuel and Emissions Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 2018 BMW 650i xDrive Gran Coupe, and some of our most reviewed parts include:
FAQs for 2018 BMW 650i xDrive Gran Coupe Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 2018 BMW 650i xDrive Gran Coupe?
Out of 25 Fuel and Emissions Systems for the 2018 BMW 650i xDrive Gran Coupe, the most popular in our inventory are:
