2018 BMW 650i xDrive Gran Coupe Cooling and Climate Controls

Essential 2018 BMW 650i xDrive Gran Coupe Cooling and Climate Controls

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC1038)

Coolant Temperature Sensor with O-Ring

from

$26.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Engine Coolant Integrated Thermostat Housing (Part No.85956)

Engine Coolant Integrated Thermostat Housing

from

$85.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring  to ensure proper seal (where applicable
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • All-in-one bolt on solution for a complete repair
  • Includes quality thermostat
See More

Behr – Expansion Tank Cap (Part No.G1040458946BEH)

Expansion Tank Cap

from

$23.33
The Behr Expansion Tank Cap is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – New Compressor (Part No.T198367)

New Compressor

from

$1543.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:
  • Endurance tested the equivalent of 50k miles
  • Includes specific electrical connector to eliminate splicing
  • Charged with lubricant to reduce internal friction promoting enhanced system performance and longevity
  • For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, o-rings, or seals needed to repair your car
  • Each unit is individually leak, vacuum and pressure tested prior to packaging to ensure leak free performance
See More

Gates – Heater Valve (Part No.R3020656064GAT)

Heater Valve

from

$244.02
Heater Valve

Rein – Coolant Expansion Tank (Part No.G1030447750RIN)

Coolant Expansion Tank

from

$97.90
The Rein Engine Coolant Recovery Tank is designed for enduring use. It resists the expansion and cracking that extreme temperature fluctuations can cause. Plus, the virgin plastic construction prevents coolant fluid loss.

Product Features:
  • Includes Sensor and OE Cap (if applicable)
  • Produced from virgin plastic meeting/exceeding OE specifications, ensuring long life
  • Resistant to cracking and wear from heat cycles preventing coolant loss
  • Direct fitment allows easy installation
See More

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83147)

A/C Desiccant Bag Kit

from

$14.49
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Rein – Molded Radiator Hose (Part No.G2000377418RIN)

Molded Radiator Hose

from

$48.39
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old “quick connect” fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Carquest Premium – AC Pressure Sensor (Part No.ABA1128)

AC Pressure Sensor

from

$85.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees (Part No.606-221)

Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees

from

$84.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713896)

A/C Condenser and Receiver Drier Assembly

from

$202.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

Original Equipment – Coolant Level Sensor (Part No.G1050335088OEA)

Coolant Level Sensor

from

$25.60
Coolant Level Sensor

Rein – Water Pump Plug (Part No.G3015151330RIN)

Water Pump Plug

from

$14.08
Water Pump Plug

Behr – Radiator (Part No.G1000388233BEH)

Radiator

from

$451.55
Radiator

Victor Reinz – Engine Coolant Thermostat Housing Gasket (Part No.41-77548-00)

Engine Coolant Thermostat Housing Gasket

from

$2.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Rein – Cap-Expansion Tank (Part No.CPE0030P)

Cap-Expansion Tank

from

$18.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Direct fit.
  • Meets or exceeds pressure specifications demanded by the OE manufacturer.
  • Produced by an original equipment supplier.
See More

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39445)

A/C Block Type Flange Expansion Valve

from

$15.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

DENSO – First Time Fit A/C Conr (Part No.R1030660894ND)

First Time Fit A/C Conr

from

$241.94
Like all DENSO First Time Fit® A/C components, our condensers are designed and manufactured to integrate seamlessly with the vehicle’s original air conditioning system. DENSO condensers match up to OE condensers at every benchmark. Multiflow, subcooling, and the latest Ssrpentine condenser styles are offered to provide the optimum configuration for each application. Premium aluminum construction improves reliability, resisting corrosion to avoid expensive system leaks, while the superior fin wave design offers higher heat transfer and maximum refrigerant condensation. Heat exchanger cores are specially designed to shed airborne material buildup, allowing the A/C system to operate at peak efficiency with minimal maintenance, assuring years of trouble-free service.

Product Features:
  • Zinc diffusion layer improves corrosion resistance
  • Unique fin design to minimize airflow blockage
  • High performance design reduces the required compressor power
  • System Efficiency: Superior fin waves provide a higher heat transfer coefficient and full condensation.
  • Engineered to Perfection: OE quality engineered for unparalleled performance
  • Exact Fit: Condensers install with speed and ease
  • Reduces required compressor power, resulting improved fuel economy
  • Restores A/C performance to as-new condition
  • First Time Fit® assures bolt-in replacement; no brackets or adapters
  • Greater Durability: Pure aluminum construction provides greater resistance for corrosion
See More

Original Equipment – A/C Pressure Switch (Part No.R1054668713OEA)

A/C Pressure Switch

from

$29.54
A/C Pressure Switch

Original Equipment – Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G5030151345OEA)

Engine Cooling Auxiliary Thermo-Fan Switch

from

$34.68
The Original Equipment Engine Cooling Thermo-Fan Switch is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Original Equipment – Oil Temperature Send (Part No.P4033412906OEA)

Oil Temperature Send

from

$56.96
Oil Temperature Send

Carquest Premium – Blower Motor: With Wheel (Part No.75027)

Blower Motor: With Wheel

from

$159.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Pierburg – Pierburg Auxiliary Water Pump (Part No.G3050335584APG)

Pierburg Auxiliary Water Pump

from

$338.97
The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:
  • OE Quality, reliability and service life
  • Reduction in noise
  • Leak-proof sealing of the drive
  • Fuel savings and reduced emissions
  • Cooling even without operation of the engine
  • Water circulation pump can deliver as much as 800 liters per hour
  • Coolant pump can deliver more than 9,000 liters per hour
See More

Carquest Premium – Engine Electric Water Pump: New, Plastic Housing (Part No.T1630)

Engine Electric Water Pump: New, Plastic Housing

from

$85.99
Carquest Premium auxiliary water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, impeller, controller, gaskets, and seals are designed for long-lasting service life. These electric water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium auxiliary water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • Built to meet or exceed OE fit, form and function
  • All components necessary for installation are supplied with pump
  • 100% tested for reliable performance
  • Follow all enclosed instructions to maximize pump life and validate warranty
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Elring – Water Pump Gasket (Part No.G3040314647ELR)

Water Pump Gasket

from

$14.84
Water Pump Gasket

Rein – Water Pump- Metal Impeller (Part No.WPR0015)

Water Pump- Metal Impeller

from

$224.99
Rein Automotive OE quality water pumps are designed to be direct replacements for OE water pumps and water pump assembles. Rein water pumps are made to original casting specifications to ensure proper fitments for easy installation, proper water flow and maximum cooling. Pumps include the necessary OE style gaskets and/or o-rings to replace the old worn out parts. Seals are made from a high quality silicate carbide compound. Bearings of OE design and materials are also used to meet or exceed OEM standards and ensure long service life. Our quality water pumps aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component. Please read and follow all enclosed instructions to maximize pump life and validate warranty.

Product Features:
  • Pump is produced with silicon carbide seals providing improved durability and service life
  • Pump uses OE designed bearings by ensuring to extend pumps service life
  • Read and follow all enclosed instructions to maximize pump life and to qualify for extended warranty
  • Includes OEM quality sensor and metal pulley to replace all wearable parts for easy installation
See More

Geba – Geba Water Pump (Part No.G3000458067GEB)

Geba Water Pump

from

$214.31
The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • High quality cast aluminum.
  • Advanced bearing design for high axial and radial stresses.
  • Unitized sealing technology that ensures optimal leak tightness and longevity.
  • Optimum cooling performance and longevity.
See More

2018 BMW 650i xDrive Gran Coupe Cooling and Climate Controls

You count on your 2018 BMW 650i xDrive Gran Coupe to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 46 Cooling and Climate Controls ranging in price from $2.99 to $1,543.99, you’re sure to find everything you need for your 2018 BMW 650i xDrive Gran Coupe.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 18 different brands like Carquest Premium, Motorad, and Original Equipment. 2018 BMW 650i xDrive Gran Coupe Cooling and Climate Controls start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 19 extensive product reviews on 2018 BMW 650i xDrive Gran Coupe Cooling and Climate Controls.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2018 BMW 650i xDrive Gran Coupe below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 2018 BMW 650i xDrive Gran Coupe

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2018 BMW 650i xDrive Gran Coupe running right for years to come. In our inventory you’ll find brands like Carquest Premium, Motorad, Original Equipment, and even more.

Popular MAHLE Original Cooling and Climate Controls

You’ll find popular MAHLE Original brand products across Engine Cooling Parts. All are waiting to get your 2018 BMW 650i xDrive Gran Coupe back on the road. Some of the top-rated MAHLE Original products in these categories are:
Thermostat Housing Seal
from $3.49
(3)
Thermostat Housing Seal
Thermostat Housing Gaskets

Top-Rated Cooling and Climate Controls


If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 2018 BMW 650i xDrive Gran Coupe, and some of our most reviewed parts include:
Radiator Cap: 30 PSI
from $23.99
(14)
Radiator Cap: 30 PSI
Coolant Reservoir Caps

FAQs for 2018 BMW 650i xDrive Gran Coupe Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2018 BMW 650i xDrive Gran Coupe?

Out of 46 Cooling and Climate Controls for the 2018 BMW 650i xDrive Gran Coupe, the most popular in our inventory are:
Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees
from $84.99
(2)
Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees
Thermostat and Water Outlet Assemblies
Coolant Temperature Sensor with O-Ring
from $26.99
This product is not rated
Coolant Temperature Sensor with O-Ring
Coolant Temperature Sensors
Engine Coolant Temperature Sensor
from $25.99
This product is not rated
Engine Coolant Temperature Sensor
Coolant Temperature Sensors