2018 BMW 320i Belts and Hoses

Essential Belts and Hoses for 2018 BMW 320is

Mitsuboshi – Drive Belt (Part No.W1000849265MBL)

Drive Belt

from

$22.45
The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Dayco – Bottom Cog V-Belt; 30.5 Inch Long, Exact Fit Premium Quality (Part No.15305)

Bottom Cog V-Belt; 30.5 Inch Long, Exact Fit Premium Quality

from

$12.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Bando – Precision Engineered V-Belt (Part No.W100046454BAN)

Precision Engineered V-Belt

from

$18.20
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

Dayco – Bottom Cog V-Belt; 33.5 Inch Long, Exact Fit Premium Quality (Part No.15335)

Bottom Cog V-Belt; 33.5 Inch Long, Exact Fit Premium Quality

from

$18.79
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  • Prevents electromechanical interference issues on modern vehicles
  •  Resists heat, oil and grease
See More

Rein – Water Hose (Part No.CHE0587)

Water Hose

from

$44.99
Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Cooling Hose (Part No.G2021552130RIN)

Cooling Hose

from

$62.39
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Rein – Cooling Hose (Part No.G2021665702RIN)

Cooling Hose

from

$43.06
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Rein – Molded Radiator Hose (Part No.G2000442010RIN)

Molded Radiator Hose

from

$99.36
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old “quick connect” fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Rein – Coolant Hose Metal Connector (Part No.CHC0609)

Coolant Hose Metal Connector

from

$44.99
Rein OE Quality metal connectors are designed to be direct replacements for OE connectors. Rein connectors are manufactured with high-quality metal construction to ensure durability and long service life.

Product Features:
  • Metal connector is an upgraded replacement of the most common coolant hose failure point – the connector.
  • Comes with the clamp needed to secure the connector to the hose.
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • High corrosion resistance.
See More

INA – Accessory Belt Tensioner Assembly (Part No.G6001411305INA)

Accessory Belt Tensioner Assembly

from

$92.79
The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality precision spring tension assembly
  • OE specified bearing and pulley assembly
  • Durable long life performance
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999595A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$138.99
This Heavy duty belt tensioner is manufactured by one of the largest original equipment tensioner suppliers to ensure proper fit and performance. This tensioner is produced for serpentine belt routing applications and is made of high strength steel for improved life and durability. This part corresponds to the 2012-2015 BMW, 328I, 4-Cyl. 2.0 L, Tensioner Assembly. The tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. This higher damping consequently reduces arm motion and wear as well as an optimized install feature for ease on tensioner replacement. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the largest original equipment part suppliers to ensure proper form, fit, and performance
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Heavy duty thermoplastic pulley for long life
  • Installation instructions included
See More

Rein – Expansion Tank Hose (Part No.G2030442028RIN)

Expansion Tank Hose

from

$38.54
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Rein – Radiator Hose (Part No.CHR0584)

Radiator Hose

from

$59.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Gates – Vulco« Straight Coolant Hose (Part No.24020)

Vulco« Straight Coolant Hose

from

$0.99
Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.

Product Features:
  • Heat-resistant cover
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom fit installations
  • Meets SAE 20R1 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
See More

Rein – Molded Radiator Hose (Part No.G2000442011RIN)

Molded Radiator Hose

from

$87.70
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old “quick connect” fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.31" Diameter (Part No.B70815)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.31" Diameter

from

$17.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Premium Molded Coolant Hose (Part No.20801)

Premium Molded Coolant Hose

from

$23.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25251)

Vulco-Flex½ II Flexible Coolant Hose

from

$30.49
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25252)

Vulco-Flex« II Flexible Coolant Hose

from

$21.79
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Radiator Hose (Part No.G20001691131DAY)

Radiator Hose

from

$12.65
Radiator Hose

Driveworks – Poly Rib Belt Serpentine Belt; 61.5 Long, 6 Rib Count (Part No.615K6)

Poly Rib Belt Serpentine Belt; 61.5 Long, 6 Rib Count

from

$26.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 61.5 Long, 6 Rib Count (Part No.5060615)

Poly Rib Belt Serpentine Belt; 61.5 Long, 6 Rib Count

from

$40.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Driveworks – Poly Rib Belt Serpentine Belt; 39.33 Long, 6 Rib Count (Part No.393K6)

Poly Rib Belt Serpentine Belt; 39.33 Long, 6 Rib Count

from

$23.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Dayco – Poly Rib Belt Serpentine Belt; 35.04 Long, 5 Rib Count (Part No.5050350)

Poly Rib Belt Serpentine Belt; 35.04 Long, 5 Rib Count

from

$24.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 39.33 Long, 6 Rib Count (Part No.5060393)

Poly Rib Belt Serpentine Belt; 39.33 Long, 6 Rib Count

from

$40.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 35.04 Long, 5 Rib Count (Part No.350K5)

Poly Rib Belt Serpentine Belt; 35.04 Long, 5 Rib Count

from

$15.79
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Upgrade your 2018 BMW 320i with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2018 BMW 320i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Belts and Hoses are key to keeping your 320i functioning at its best. At Advance Auto Parts, we offer a wide selection of 25 Belts and Hoses for the 2018 BMW 320i, designed to meet your needs without breaking the bank. From Radiator Hose replacements to Engine Cooling Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2018 BMW 320i at great prices. Our Belts and Hoses inventory for this model ranges from just $22.45 to $138.99, with an average price of $56.37. Our 25 Belts and Hoses in stock come from 8 trusted brands, so you’re sure to find the right part for your 2018 BMW 320i without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 BMW 320i, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, and more. Dayco Belts and Hoses start at just $25.69 and boast an impressive 5 stars average rating from customers. With 5 customer reviews and counting, our 2018 BMW 320i Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 BMW 320i is always ready to roll. We’re committed to providing you with everything you need to keep your 320i in top shape, all in one place. Start shopping confidently below for your 2018 BMW 320i!

Best-Selling Radiator Hoses for 2018 BMW 320is

Enhance the driving experience in your BMW with 15 quality Radiator Hose components, starting at $26.99.

Rein – Coolant Hose Metal Connector (Part No.CHC0609)

Coolant Hose Metal Connector

from

$44.99
Rein OE Quality metal connectors are designed to be direct replacements for OE connectors. Rein connectors are manufactured with high-quality metal construction to ensure durability and long service life.

Product Features:
  • Metal connector is an upgraded replacement of the most common coolant hose failure point – the connector.
  • Comes with the clamp needed to secure the connector to the hose.
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • High corrosion resistance.
See More

Rein – Water Hose (Part No.CHE0542)

Water Hose

from

$26.99
Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Molded Radiator Hose (Part No.G2000442010RIN)

Molded Radiator Hose

from

$99.36
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old “quick connect” fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.44" Diameter (Part No.D73072)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14" Long, 1.44" Diameter

from

$95.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.44" Diameter (Part No.E73071)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.44" Diameter

from

$84.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Rein – Radiator Hose (Part No.CHR0590)

Radiator Hose

from

$71.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Water Hose (Part No.CHE0636)

Water Hose

from

$69.99
Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Cooling Hose (Part No.G2021552130RIN)

Cooling Hose

from

$62.39
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Rein – Water Hose (Part No.CHE0612)

Water Hose

from

$54.99
Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Water Hose (Part No.CHE0593)

Water Hose

from

$49.99
Rein automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduce installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Water Hose (Part No.CHE0587)

Water Hose

from

$44.99
Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Cooling Hose (Part No.G2021665702RIN)

Cooling Hose

from

$43.06
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Rein – Water Hose (Part No.CHE0588)

Water Hose

from

$40.99
Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Water Hose (Part No.CHE0581)

Water Hose

from

$39.99
Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Rein – Expansion Tank Hose (Part No.G2030442028RIN)

Expansion Tank Hose

from

$38.54
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Most Popular 2018 BMW 320i Engine Cooling Hoses

Customize your BMW with 2 Engine Cooling Hoses products like Lower Radiator Hoses, all priced under $87.70.

Rein – Molded Radiator Hose (Part No.G2000442011RIN)

Molded Radiator Hose

from

$87.70
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old “quick connect” fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Rein – Radiator Hose (Part No.CHR0584)

Radiator Hose

from

$59.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Top Picks for 2018 BMW 320i Serpentine and V Belts

Upgrade BMW 320is with top-quality Serpentine and V Belts parts, including 6 OEM and aftermarket selections for your 2018 model.

Dayco – Poly Rib Belt Serpentine Belt; 39.33 Long, 6 Rib Count (Part No.5060393)

Poly Rib Belt Serpentine Belt; 39.33 Long, 6 Rib Count

from

$40.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 39.33 Long, 6 Rib Count (Part No.393K6)

Poly Rib Belt Serpentine Belt; 39.33 Long, 6 Rib Count

from

$23.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

ContiTech – Drive V-Belt (Part No.W1000411169CON)

Drive V-Belt

from

$25.37
All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Polyester fiber tensile members and a ribbed belt design.
See More

Mitsuboshi – Drive Belt (Part No.W1000849265MBL)

Drive Belt

from

$22.45
The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
See More

Dayco – Dayco, Drive Belt (Part No.W10001221612DAY)

Dayco, Drive Belt

from

$25.69
Dayco, Drive Belt

Bando – Multi Rib (Serpentine) Belt (Part No.W100028006BAN)

Multi Rib (Serpentine) Belt

from

$22.62
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

In-Demand Belt Tensioners for 2018 BMW 320is

Select from 2 premium Belt Tensioners parts for your 2018 BMW 320i, with prices ranging from $92.79 to $138.99.

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999595A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$138.99
This Heavy duty belt tensioner is manufactured by one of the largest original equipment tensioner suppliers to ensure proper fit and performance. This tensioner is produced for serpentine belt routing applications and is made of high strength steel for improved life and durability. This part corresponds to the 2012-2015 BMW, 328I, 4-Cyl. 2.0 L, Tensioner Assembly. The tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. This higher damping consequently reduces arm motion and wear as well as an optimized install feature for ease on tensioner replacement. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the largest original equipment part suppliers to ensure proper form, fit, and performance
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Heavy duty thermoplastic pulley for long life
  • Installation instructions included
See More

INA – Accessory Belt Tensioner Assembly (Part No.G6001411305INA)

Accessory Belt Tensioner Assembly

from

$92.79
The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality precision spring tension assembly
  • OE specified bearing and pulley assembly
  • Durable long life performance
See More

Top-Rated Belts and Hoses Brands For Your 2018 BMW 320i

Shop for the best-rated brands offering Belts and Hoses and other products for your 2018 BMW 320is. Below you’ll find some of our best rated Belts and Hoses from Dayco, and more. Belts and Hoses from these brands that fit a 2018 320i start at just $25.69 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2018 BMW 320i Belts and Hoses

When it comes to maintaining or upgrading your 2018 BMW 320i, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2018 BMW 320i. With over 4 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $25.69, with an average price of just $61.92. Plus, with over 5 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Dayco, Drive Belt
from
$25.69
This product is not rated

Dayco, Drive Belt

“”

FAQs for 2018 BMW 320i Belts and Hoses

Which Belts and Hoses are best-sellers for 2018 BMW 320is?

Out of 25 Belts and Hoses that fit 2018 BMW 320is, the following parts are the top sellers:

What’s the price range for 2018 BMW 320i Belts and Hoses?

Belts and Hose prices for the 2018 BMW 320i start at $22.45 and go up to $138.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2018 BMW 320i?

The average price for Belts and Hoses for the 2018 BMW 320i is $56.37. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other BMW 320i model years?

Yes, we currently carry Belts and Hoses for 12 model years of BMW 320is between 1977 and 2017. Belts and Hoses are bought most frequently for the following model years: 2017, 2016, 2015, 2014, 2013, 1983, 1982, 1981, and 1980.

What are the cheapest Belts and Hoses for my 2018 BMW 320i?

The cheapest 2018 BMW 320i Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 2018 BMW 320i?

Out of 5 reviews by customers, our 2018 BMW 320i Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2018 BMW 320i and their top-rated products:

Can I get help with 2018 BMW 320i Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Belts and Hoses and more.

What is your return policy for BMW 320i Belts and Hoses?

Advance Auto Parts keeps returns simple. For new BMW 320i Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.