2018 Audi S8 Engine Cooling Parts
More 2018 Audi S8 Engine Cooling Parts
Find your specific 2018 Audi S8 original or aftermarket Engine Cooling Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2018 Audi S8 Engine Cooling Parts
Rein – Radiator Mount (Part No.AVM0702)
from
$14.49
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
- Part has a high corrosion resistance for maximum life.
- Produced with high quality materials to ensure maximum life and a smooth ride.
- Made by the OE manufacturer.
Rein – Temperature Sensor Kit (Part No.ELC0051P)
from
$18.99
Electrical parts control all aspects of vehicles on the road today. Replacing these components when they are starting to fail will ensure your vehicle has maximum performance and fuel economy. This is why Rein Automotive electrical parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- Tested to ensure maximum performance
- Manufactured to strict engineering standards/specifications in materials and tolerances
- Long life and durability
- Made by the OE manufacturer
Carquest Premium – Coolant Temperature Sensor (Part No.WTC2065)
from
$29.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC2196)
from
$50.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
APA/URO Parts – Expansion Tank Cap (Part No.G104036817APA)
from
$4.80
The APA/URO Expansion Tank Cap is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Rein – Cap-Expansion Tank (Part No.CPE0039)
from
$15.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Rein – Cap-Expansion Tank (Part No.CPE0047)
from
$16.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Febi – Water Temperature Sensor O-Ring (Part No.C606032192FEB)
from
$1.79
Water Temperature Sensor O-Ring
Corteco – Heater Pipe O-Ring (Part No.G3077462035CFW)
from
$1.79
Heater Pipe O-Ring
Meistersatz – Oil Drain Plug Gaske (Part No.A6120860165MEI)
from
$0.62
Oil Drain Plug Gaske
Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 207 Degrees (Part No.958-207)
from
$107.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 221 Degrees (Part No.941-221)
from
$87.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Beck/Arnley – Water Flange (Part No.147-0039)
from
$64.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Manufactured with high quality materials
- Designed for underhood conditions
- Quality constructed for durability
- Application specific for this vehicle
Popular 2018 Audi S8 Engine Cooling Parts Categories
2018 Audi S8 Engine Cooling Parts
Maybe you’re in the middle of a full rebuild of that 2018 Audi S8. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 15 different Engine Cooling Parts in our inventory ranging from $0.62 to $107.99. That means you can find the exact parts or products you need to keep that 2018 Audi S8 running smoothly.
Engine Cooling Parts are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2018 Audi S8. Carquest Premium, Motorad, and Rein are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Engine Cooling Parts for your 2018 Audi S8, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2018 Audi S8 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Engine Cooling Parts Brands To Make Your 2018 Audi S8 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2018 Audi S8 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your S8 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.
Popular Carquest Premium Engine Cooling Parts
We carry Carquest Premium parts in our stock across Coolant Reservoir Caps categories, plus more. For a 2018 Audi S8, our most popular Carquest Premium Engine Cooling Parts include:
FAQs for 2018 Audi S8 Engine Cooling Parts
What are the most purchased Engine Cooling Parts for the 2018 Audi S8?
Out of 15 Engine Cooling Parts for the 2018 Audi S8, the most popular in our inventory are:
from
$107.99
This product is not rated
Integrated Thermostat Housing: With Sensor, With Seal, 207 Degrees
Thermostat and Water Outlet Assemblies
