2018 Audi S7 Engine Cooling Parts

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

• Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
• Part has a high corrosion resistance for maximum life.
• Produced with high quality materials to ensure maximum life and a smooth ride.
• Made by the OE manufacturer.

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

• OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
• FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
• THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

• Matches OE form, fit and function
• Manufactured with high quality materials
• Designed for underhood conditions
• Quality constructed for durability
• Application specific for this vehicle

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:

• Ideal for rigid cast aluminum parts
• Meets OEM Specifications
• Sensor safe & non-corrosive
• Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
• Blowout resistant, allowing leakproof gaskets to be made in just one minute
• Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
• Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
• Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
• Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

• High grade stainless steel and copper construction
• Meets or exceeds OEM standards
• Consistent and precise response to cooling system needs
• Original equipment design for worry-free direct fit replacement
• 100% tested and calibrated

Water Temperature Sensor O-Ring

The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

• OE Quality, reliability and service life
• Reduction in noise
• Leak-proof sealing of the drive
• Fuel savings and reduced emissions
• Cooling even without operation of the engine
• Water circulation pump can deliver as much as 800 liters per hour
• Coolant pump can deliver more than 9,000 liters per hour

The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:

• OE Quality, reliability and service life
• Reduction in noise
• Leak-proof sealing of the drive
• Fuel savings and reduced emissions
• Cooling even without operation of the engine
• Water circulation pump can deliver as much as 800 liters per hour
• Coolant pump can deliver more than 9,000 liters per hour

Auxiliary Water Pump

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

• Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
• Sensor-safe, non-corrosive, RTV silicone
• Protects against leaks caused by vibration and thermal expansion
• Meets performance specs of OE silicone gaskets
• Quickly returns vehicle to service in just 1 minute

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

• Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
• Sensor-safe, non-corrosive, RTV silicone
• Protects against leaks caused by vibration and thermal expansion
• Meets performance specs of OE silicone gaskets
• Quickly returns vehicle to service in just 1 minute

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

Radiator

Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:

• OE-Equivalent
• Direct fit for easy installation.
• High quality corrosion resistant materials.
• OE Style mounting brackets and hose connections.
• Mechanically bonded aluminum core.
• Integrated transmission oil cooler when applicable.

Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:

• Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
• Resistant to cracking and wear from heat cycles preventing coolant loss
• Direct fitment allows easy installation
• Manufactured to strict engineering standards/specifications in materials and tolerances

Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:

• Maintains proper cooling system pressure
• Easy installation and removal
• 100% tested to ensure proper pressure and longevity
• Meets all OEM specifications