2018 Audi S7 Cooling and Climate Controls

Essential Cooling and Climate Controls for 2018 Audi S7s

Carquest Premium – Radiator Cap Tester Adapter (Part No.12037)

Radiator Cap Tester Adapter

from

$75.99
Tester adapter for the 9300 and MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Rein – Radiator Mount (Part No.AVM0702)

Radiator Mount

from

$14.49
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
  • Part has a high corrosion resistance for maximum life.
  • Produced with high quality materials to ensure maximum life and a smooth ride.
  • Made by the OE manufacturer.
See More

Rein – Expansion Tank (Part No.EPT0191)

Expansion Tank

from

$48.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:
  • Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
  • Resistant to cracking and wear from heat cycles preventing coolant loss
  • Direct fitment allows easy installation
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1802)

A/C Refrigerant Pressure Sensor

from

$49.49
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Pierburg – Auxiliary Water Pump (Part No.G3050551801APG)

Auxiliary Water Pump

from

$211.60
The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:
  • OE Quality, reliability and service life
  • Reduction in noise
  • Leak-proof sealing of the drive
  • Fuel savings and reduced emissions
  • Cooling even without operation of the engine
  • Water circulation pump can deliver as much as 800 liters per hour
  • Coolant pump can deliver more than 9,000 liters per hour
See More

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Premium – Blower Motor: With Wheel (Part No.76520)

Blower Motor: With Wheel

from

$299.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
  • Functionally Equivalent to OE Design
  • Magnetic size and properties compare or exceed OEM
  • Hermetically Sealed & Thermally Protected Electronics
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Koyo Cooling – A/C Condenser (Part No.R1030512088KCS)

A/C Condenser

from

$113.47
A/C Condenser

Behr – Behr Radiator (Part No.G1000410484BEH)

Behr Radiator

from

$276.82
Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:
  • OE-Equivalent
  • Direct fit for easy installation.
  • High quality corrosion resistant materials.
  • OE Style mounting brackets and hose connections.
  • Mechanically bonded aluminum core.
  • Integrated transmission oil cooler when applicable.
See More

Behr – Radiator (Part No.G1000654657BEH)

Radiator

from

$422.61
Radiator

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10249)

Engine Coolant Reservoir Cap

from

$11.99
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54019)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$20.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 207 Degrees (Part No.958-207)

Integrated Thermostat Housing: With Sensor, With Seal, 207 Degrees

from

$107.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – A/C Block Expansion Valve (Part No.T39564)

A/C Block Expansion Valve

from

$16.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Santech – A/C Expansion Valve (Part No.R1045512859SII)

A/C Expansion Valve

from

$65.31
A/C Expansion Valve

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA1027)

Engine Coolant Temperature Sensor

from

$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC2065)

Coolant Temperature Sensor

from

$29.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Beck/Arnley – Water Flange (Part No.147-0039)

Water Flange

from

$64.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Manufactured with high quality materials
  • Designed for underhood conditions
  • Quality constructed for durability
  • Application specific for this vehicle
See More

CRP – Cooling Hose Flange Plug (Part No.G202837841)

Cooling Hose Flange Plug

from

$0.86
Cooling Hose Flange Plug

Carquest Premium – A/C New, with Clutch, with 6SEU14C Compressor (Part No.T198378)

A/C New, with Clutch, with 6SEU14C Compressor

from

$643.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Upgrade your 2018 Audi S7 with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2018 Audi S7, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Cooling and Climate Controls are key to keeping your S7 functioning at its best. At Advance Auto Parts, we offer a wide selection of 28 Cooling and Climate Controls for the 2018 Audi S7, designed to meet your needs without breaking the bank. From Blower Motor and Related Product replacements to Engine Cooling Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2018 Audi S7 at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $0.86 to $690.07, with an average price of $128.14. Our 28 Cooling and Climate Controls in stock come from 16 trusted brands, so you’re sure to find the right part for your 2018 Audi S7 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 Audi S7, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. With 596 customer reviews and counting, our 2018 Audi S7 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 Audi S7 is always ready to roll. We’re committed to providing you with everything you need to keep your S7 in top shape, all in one place. Start shopping confidently below for your 2018 Audi S7!

Best-Selling Blower Motor and Related Products for 2018 Audi S7s

Enhance the driving experience in your Audi with 1 quality Blower Motor and Related Product components, starting at $690.07.

VDO – Blower Motor (Part No.R2031951296VDO)

Blower Motor

from

$690.07
Blower Motor

Most Popular 2018 Audi S7 Engine Cooling Parts

Customize your Audi with 22 Engine Cooling Parts products like Radiators, Thermostat and Water Outlet Gaskets, and Thermostat and Water Outlet Assemblies, all priced under $513.11.

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10249)

Engine Coolant Reservoir Cap

from

$11.99
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Motorad – Integrated Thermostat Housing: With Sensor, With Seal, 207 Degrees (Part No.958-207)

Integrated Thermostat Housing: With Sensor, With Seal, 207 Degrees

from

$107.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Rein – Expansion Tank (Part No.EPT0191)

Expansion Tank

from

$48.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:
  • Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
  • Resistant to cracking and wear from heat cycles preventing coolant loss
  • Direct fitment allows easy installation
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

Elth – Water Temp. Sensor (Part No.C6020239910ELT)

Water Temp. Sensor

from

$24.17
Water Temp. Sensor

Pierburg – Auxiliary Water Pump (Part No.G3050551866APG)

Auxiliary Water Pump

from

$513.11
The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:
  • OE Quality, reliability and service life
  • Reduction in noise
  • Leak-proof sealing of the drive
  • Fuel savings and reduced emissions
  • Cooling even without operation of the engine
  • Water circulation pump can deliver as much as 800 liters per hour
  • Coolant pump can deliver more than 9,000 liters per hour
See More

Behr – Radiator (Part No.G1000654657BEH)

Radiator

from

$422.61
Radiator

Behr – Behr Radiator (Part No.G1000410484BEH)

Behr Radiator

from

$276.82
Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:
  • OE-Equivalent
  • Direct fit for easy installation.
  • High quality corrosion resistant materials.
  • OE Style mounting brackets and hose connections.
  • Mechanically bonded aluminum core.
  • Integrated transmission oil cooler when applicable.
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12037)

Radiator Cap Tester Adapter

from

$75.99
Tester adapter for the 9300 and MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Beck/Arnley – Water Flange (Part No.147-0039)

Water Flange

from

$64.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Manufactured with high quality materials
  • Designed for underhood conditions
  • Quality constructed for durability
  • Application specific for this vehicle
See More

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC2196)

Coolant Temperature Sensor with O-Ring

from

$50.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC2065)

Coolant Temperature Sensor

from

$29.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Rein – Radiator Mount (Part No.AVM0702)

Radiator Mount

from

$14.49
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
  • Part has a high corrosion resistance for maximum life.
  • Produced with high quality materials to ensure maximum life and a smooth ride.
  • Made by the OE manufacturer.
See More

Reutter – Expansion Tank Cap (Part No.G1040180209REU)

Expansion Tank Cap

from

$11.24
Expansion Tank Cap

Febi – Radiator Insulator (Part No.G1024818596FEB)

Radiator Insulator

from

$9.65
Radiator Insulator

Autopart International Inc – Expansion Tank Cap (Part No.G10402046473API)

Expansion Tank Cap

from

$7.19
Expansion Tank Cap

Rein – RADIATOR MOUNT (Part No.AVM0742)

RADIATOR MOUNT

from

$4.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
  • Part has a high corrosion resistance for maximum life.
  • Produced with high quality materials to ensure maximum life and a smooth ride.
  • Made by the OE manufacturer.
See More

Mahle – Water Flange O-Ring (Part No.G202437848MAH)

Water Flange O-Ring

from

$3.73
Water Flange O-Ring

Febi – Radiator Insulator (Part No.G1024818598FEB)

Radiator Insulator

from

$2.89
Radiator Insulator

CRP – Cooling Hose Flange Plug (Part No.G202837841)

Cooling Hose Flange Plug

from

$0.86
Cooling Hose Flange Plug

Top Picks for 2018 Audi S7 Air Conditioning Parts

Upgrade Audi S7s with top-quality Air Conditioning Parts parts, including 5 OEM and aftermarket selections for your 2018 model.

Carquest Premium – A/C New, with Clutch, with 6SEU14C Compressor (Part No.T198378)

A/C New, with Clutch, with 6SEU14C Compressor

from

$643.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Nissens – A/C Condenser (Part No.R1030856433NSS)

A/C Condenser

from

$369.15
A/C Condenser

Santech – A/C Expansion Valve (Part No.R1045512859SII)

A/C Expansion Valve

from

$65.31
A/C Expansion Valve

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1802)

A/C Refrigerant Pressure Sensor

from

$49.49
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39464)

A/C Block Type Flange Expansion Valve

from

$14.29
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Top-Rated Cooling and Climate Controls Brands For Your 2018 Audi S7

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2018 Audi S7s. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2018 S7 start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2018 Audi S7 Cooling and Climate Controls

When it comes to maintaining or upgrading your 2018 Audi S7, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2018 Audi S7. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ
from
$38.99
This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

Popular Carquest Premium 2018 Audi S7 Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2018 Audi S7 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2018 S7, Advance Auto Parts carries a full inventory of 7 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Audi in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $11.99 to $643.99, plus, with more than 3 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

Coolant Temperature Sensor with O-Ring
from
$50.99
This product is not rated

Coolant Temperature Sensor with O-Ring

“”

A/C New, with Clutch, with 6SEU14C Compressor
from
$643.99
This product is not rated

A/C New, with Clutch, with 6SEU14C Compressor

“”

Radiator Cap Tester Adapter
from
$75.99
This product is not rated

Radiator Cap Tester Adapter

“”

FAQs for 2018 Audi S7 Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2018 Audi S7s?

Out of 28 Cooling and Climate Controls that fit 2018 Audi S7s, the following parts are the top sellers:

What’s the price range for 2018 Audi S7 Cooling and Climate Controls?

Cooling and Climate Control prices for the 2018 Audi S7 start at $0.86 and go up to $690.07 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2018 Audi S7?

The average price for Cooling and Climate Controls for the 2018 Audi S7 is $128.14. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Audi S7 model years?

Yes, we currently carry Cooling and Climate Controls for 8 model years of Audi S7s between 2013 and 2022. Cooling and Climate Controls are bought most frequently for the following model years: 2022, 2021, 2020, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Cooling and Climate Controls for my 2018 Audi S7?

The cheapest 2018 Audi S7 Cooling and Climate Controls we carry in stock are:

What are the top-rated Cooling and Climate Controls that fit the 2018 Audi S7?

Out of 596 reviews by customers, our 2018 Audi S7 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2018 Audi S7 and their top-rated products:

What types of Cooling and Climate Controls do you sell for my 2018 Audi S7?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2018 Audi S7:

Can I get help with 2018 Audi S7 Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Cooling and Climate Controls and more.

What is your return policy for Audi S7 Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Audi S7 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.