2017 Porsche 911 Cooling and Climate Controls

Below you will find various in-demand Porsche Cooling and Climate Controls, components and accessories for your 2017 911. Advance Auto Parts has popular 911 parts like Engine Cooling Parts Air Conditioning Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other 911 model years including 2012, 2013, 2014, 2015, 2016, 2018, 2019, 2020, 2021 and more. Select a category of 2017 Porsche 911 Cooling and Climate Controls below and start saving instantly.

Popular 2017 Porsche 911 Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Water Pumps

AC Compressor Without Clutch

Thermostat and Water Outlet Assemblies

Coolant Temperature Sensors

Engine Water Pump Inlet Pipe Gaskets

Engine Coolant Pipe O-Rings

AC Condensers

Thermostat Housings

Engine Auxiliary Water Pumps

Accumulator and Receiver Driers

Water Pump Gaskets

Expansion Valve and Orifice Tubes

Engine Water Pump Backing Plate Gaskets

AC Refrigerant Pressure Sensors

Essential Cooling and Climate Controls for 2017 Porsche 911s

from

$11.22

Water Pump Gasket

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$75.99

New Standard Replacement A/C Expansion Valve

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$29.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
Precision machined ports

from

$44.99

Rein Automotive OE quality thermostat assemblies install, fit and perform the way the original manufacturer intended. These assemblies are designed to meet or exceed the OE materials used. Rein thermostat housings are constructed of metal or plastic based on vehicle specific factory requirements. The housings are constructed from molds cast directly from the OEM parts to meet the strict tolerances of the vehicle’s factory specifications. This ensures a smooth and easy installation, just as one would expect to find with OE quality. Rein thermostats are produced with high-quality metals and components to ensure proper durability and service life. The thermostats are temperature calibrated to have a consistent and precise response suiting cooling system needs. Our quality thermostat assemblies aim to provide the profession repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component.

Product Features:

Matches original equipment design specifications
Direct fitments allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances
Thermostat set to 83 degrees Celsius to maintain optimal running temperature

from

$237.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process

from

$617.81

Maximum performance and durability in climate powering Nissens compressors are high-quality products that are designed and manufactured according to the highest quality and OE standards. The products are thoroughly tested in Nissens advanced test center to ensure maximum compression performance, long durability and a minimum of noise. Furthermore, the optimal design of Nissens compressors guarantees an ideal fit on the vehicle, permitting a smooth and easy installation process. Why opt for Nissens compressors?

Product Features:

Maximum performance and durability in climate powering
Excellent quality designed and manufactured to match the OE standards 100%
Perfect finish of all components snap rings, bearings, pistons, scrolls, valves/shaft, swash plate/clutch
Unique reliability thorough durability and performance tests: real life test and sterile test series
Minimized noise and vibration level
Perfect fit and easy installation
User-friendly installation guide included in the product warranty brochure
Well-packed products ensuring protection from transport damage First fit on Nissens compressors
Pre-filled with the right type of PAG lubricant offering the right viscosity and amount
Equipped with O-rings
Equipped with electrical adaptors (Multi Fit applications)
Equipped with pre-filters (whenever needed)

from

$6.69

Water Pipe O-Ring

from

$8.03

Water Pipe Gasket

from

$23.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$19.29

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$483.99

COOLANT HOUSING

from

$160.46

The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
High quality cast aluminum.
Advanced bearing design for high axial and radial stresses.
Unitized sealing technology that ensures optimal leak tightness and longevity.
Optimum cooling performance and longevity.

from

$430.64

The Pierburg water pump is a 100% new replacement that contains no remanufactured components, assuring original equipment performance, quality and fit.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
Resistant to corrosion.
Unitized bearing assembly.

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$19.21

Water Pump Gasket

from

$181.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$8.99

URO Parts has been a leading brand of replacement auto parts for European vehicles for more than thirty years. Affordable yet dedicated to quality, URO Parts controls its production process in strict accordance with ISO/TS 16949 QMS specifications and offers a wide variety of components used to restore or repair engine, electrical, drive train, braking, steering, suspension, climate control, cooling, exhaust, and fuel systems in classic to late-model German, British, and Scandinavian vehicles. Looking for parts that are even higher quality than original equipment? URO Parts engineers analyze common failures and identify weaknesses in original equipment parts when creating URO Premium components, which are superior to OE in performance and reliability thanks to improved materials and more robust designs. Thanks to high-quality, competitively-priced URO Parts and bulletproof URO Premium replacement components, owning a prestigious European vehicle is no longer an expensive luxury reserved for the elite and wealthy.

Product Features:

Guaranteed fitment
Direct-fit OE replacement design restores proper factory cooling fan sensor function
Easy plug-and-play connection
Manufactured using high-quality materials to withstand intense engine compartment and cooling system heat
Alloy conductors minimize electrical resistance for accurate operation
Designed and tested for reliability and long life

from

$39.49

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$40.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Brass construction for accurate temperature sensing
Color coded for easy identification
Zinc coated terminal to resist corrosion

from

$57.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$248.10

The ACM A/C Condenser is manufactured to exact OEM specifications for quality fit and performance.

Product Features:

OE-Equivalent and Direct fit Application.
Meet or exceed OEM specifications.
Utilizes the factory style mounts, connectors and fittings.
Compatible with R12 and R134a refrigerant.
Applicable gaskets and O-rings supplied with each part.

from

$371.67

BEHR manufactures an OE-equivalent direct fit A/C Condenser that guarantees the same high quality, fit and performance of the OEM A/C condenser it replaces. BEHR produces brazed flat-tube condensers, delivering high power in spite of their small package size. This ensures rapid cooling of the vehicle cabin, thanks to optimum matching of heat transfer and pressure drop on the coolant side and air side.

Product Features:

OE-Equivalent and Direct fit Application.
Advanced technology parallel flow, sub cool and serpentine design.
Provides the fit, quality and performance of the original equipment.
compliant for both R12 and R134A refrigerants.

from

$149.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$266.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

Upgrade your 2017 Porsche 911 with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2017 Porsche 911, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Porsche or enhancing its overall performance, Cooling and Climate Controls are key to keeping your 911 functioning at its best. At Advance Auto Parts, we offer a wide selection of 24 Cooling and Climate Controls for the 2017 Porsche 911, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2017 Porsche 911 at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $5.95 to $1,764.00, with an average price of $152.14. Our 24 Cooling and Climate Controls in stock come from 8 trusted brands, so you’re sure to find the right part for your 2017 Porsche 911 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2017 Porsche 911, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. With 2,655 customer reviews and counting, our 2017 Porsche 911 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2017 Porsche 911 is always ready to roll. We’re committed to providing you with everything you need to keep your 911 in top shape, all in one place. Start shopping confidently below for your 2017 Porsche 911!

Best-Selling Engine Cooling Parts for 2017 Porsche 911s

Enhance the driving experience in your Porsche with 16 quality Engine Cooling Part components, starting at $5.95.

show more show less

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$6.99

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$1764.00

HOUSING ASSEMBLY

from

$483.99

COOLANT HOUSING

from

$407.84

WATER PUMP

from

$349.27

AUXILIARY WATER PUMP

from

$50.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$38.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$31.49

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$29.99

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$20.99

WATER TEMP. SENSOR

from

$19.21

Water Pump Gasket

from

$8.03

Water Pipe Gasket

from

$7.42

Coolant Pipe O-Ring

from

$6.46

Water Pipe Gasket

from

$5.95

Radiator Hose O-Ring

Most Popular 2017 Porsche 911 Air Conditioning Parts

Customize your Porsche with 8 Air Conditioning Parts products like AC Compressor Without Clutch, Expansion Valve and Orifice Tubes, and AC Condensers, all priced under $778.99.

show more show less

from

$778.99

Carquest Premium A/C compressors are 100% new units that are manufactured to the highest quality to meet or exceed OE specifications.

Product Features:

Every unit is 100% function and leak tested
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
Very low friction coating used on swash plate to improve durability
PTFE coated pistons improve performance and reduce wear
Rubber dampened clutch plate ensures smooth clutch engagement and reduces wear
Matched high-quality needle-roller bearing ensures low friction and high load capability
Limited Lifetime Warranty when following warranty requirements: Flush A/C System, replace accumulator/receiver dryer, replace orifice tube/expansion device, and filling with correct oil and refrigerant

from

$709.99

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
All new compressors must pass a helium leak test and pump up function test prior to packaging.
O-Rings and gaskets necessary for installation are included.

from

$617.81

Maximum performance and durability in climate powering
Excellent quality designed and manufactured to match the OE standards 100%
Perfect finish of all components snap rings, bearings, pistons, scrolls, valves/shaft, swash plate/clutch
Unique reliability thorough durability and performance tests: real life test and sterile test series
Minimized noise and vibration level
Perfect fit and easy installation
User-friendly installation guide included in the product warranty brochure
Well-packed products ensuring protection from transport damage First fit on Nissens compressors
Pre-filled with the right type of PAG lubricant offering the right viscosity and amount
Equipped with O-rings
Equipped with electrical adaptors (Multi Fit applications)
Equipped with pre-filters (whenever needed)

from

$266.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$57.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$19.29

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$17.79

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$17.74

The ACM A/C Receiver Drier is manufactured to exact OEM specifications for quality fit and performance.

Product Features:

OE-Equivalent and Direct fit Application.
Meets or exceeds the vehicle manufacturer specifications.
Utilizes factory style fittings and connectors.
Includes the required o-rings and associated hardware

Top-Rated Cooling and Climate Controls Brands For Your 2017 Porsche 911

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2017 Porsche 911s. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, and more. Cooling and Climate Controls from these brands that fit a 2017 911 start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2017 Porsche 911 Cooling and Climate Controls

When it comes to maintaining or upgrading your 2017 Porsche 911, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2017 Porsche 911. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

FAQs for 2017 Porsche 911 Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2017 Porsche 911s?

Out of 24 Cooling and Climate Controls that fit 2017 Porsche 911s, the following parts are the top sellers:

A/C Condenser (11209244) – $266.99
WATER PUMP (50086322) – $407.84
Water Pipe Gasket (11924793) – $8.03

What’s the price range for 2017 Porsche 911 Cooling and Climate Controls?

Cooling and Climate Control prices for the 2017 Porsche 911 start at $5.95 and go up to $1,764.00 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2017 Porsche 911?

The average price for Cooling and Climate Controls for the 2017 Porsche 911 is $152.14. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Porsche 911 model years?

Yes, we currently carry Cooling and Climate Controls for 59 model years of Porsche 911s between 1965 and 2024. Cooling and Climate Controls are bought most frequently for the following model years: 2021, 2020, 2019, 2018, 2016, 2015, 2014, 2013, and 2012.

What are the cheapest Cooling and Climate Controls for my 2017 Porsche 911?

The cheapest 2017 Porsche 911 Cooling and Climate Controls we carry in stock are:

Radiator Hose O-Ring (12591335) – $5.95
Water Pipe Gasket (12568548) – $6.46
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
Coolant Pipe O-Ring (12591406) – $7.42
Water Pipe Gasket (11924793) – $8.03

What are the top-rated Cooling and Climate Controls that fit the 2017 Porsche 911?

Out of 2,655 reviews by customers, our 2017 Porsche 911 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2017 Porsche 911 and their top-rated products:

Engine Cooling Parts
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
- Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99

What types of Cooling and Climate Controls do you sell for my 2017 Porsche 911?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2017 Porsche 911:

Can I get help with 2017 Porsche 911 Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Porsche Cooling and Climate Controls and more.

What is your return policy for Porsche 911 Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Porsche 911 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2017 Porsche 911 Cooling and Climate Controls

Elring – Water Pump Gasket (Part No.G3040238887ELR)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

KAI – A/C Expansion Valve (Part No.ACX010985)

Carquest Premium – A/C TXV O-Ring Expansion Valve (Part No.T38609)

Rein – Thermostat Assembly 83C (Part No.CTA0026)

Carquest Standard – Reman York 209-210 Compressor w/o Clutch (Part No.DW57057)

Nissens – A/C Compressor w/ Clutch, New (Part No.R1000660875NSS)

Original Equipment – Water Pipe O-Ring (Part No.G2026550757OEA)

Original Equipment – Water Pipe Gasket (Part No.G2048393250OEA)

Carquest Premium – A/C Filter Drier (Part No.T33321)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83278)

Carquest Premium – COOLANT HOUSING (Part No.CH1035)

Geba – Water Pump (Part No.G3000848192GEB)

Pierburg – OE Replacement Water Pump (Part No.G3000848214APG)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Elring – Water Pump Gasket (Part No.G3040393208ELR)

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA1512)

URO Parts – Water Temperature Sensor (Part No.LNA1600AA)

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1799)

Factory Air – Coolant Temp Sensor Switch (Part No.36445)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2001)

ACM – A/C Condenser (Part No.R1030946006ACM)

Behr – BEHR A/C Condenser (Part No.R103022706BEH)

Carquest Premium – A/C Condenser (Part No.6653)

Carquest Premium – A/C Condenser (Part No.713700)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Motorad – HOUSING ASSEMBLY (Part No.TA2021)

Carquest Premium – COOLANT HOUSING (Part No.CH1035)

Worldpac – WATER PUMP (Part No.G30003361611GEB)

Worldpac – AUXILIARY WATER PUMP (Part No.G30501334742OEA)

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC2196)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Carquest Premium – Coolant Temperature Sensor (Part No.WTC2168)

Carquest Premium – Coolant Temperature Sensor (Part No.WTC2065)

Worldpac – WATER TEMP. SENSOR (Part No.C60201361342OEA)

Elring – Water Pump Gasket (Part No.G3040393208ELR)

Original Equipment – Water Pipe Gasket (Part No.G2048393250OEA)

Original Equipment – Coolant Pipe O-Ring (Part No.G2026550687OEA)

Original Equipment – Water Pipe Gasket (Part No.G20482973980OEA)

Original Equipment – Radiator Hose O-Ring (Part No.G2004393258OEA)

Carquest Premium – New Compressor (Part No.T98316)

Carquest Premium – A/C New, with Clutch, with 7SEU17C Compressor (Part No.T158360)

Nissens – A/C Compressor w/ Clutch, New (Part No.R1000660875NSS)

Carquest Premium – A/C Condenser (Part No.713700)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA2001)

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83278)

Carquest Premium – A/C Block Expansion Valve (Part No.T39573)

ACM – A/C Receiver Drier (Part No.R104065679ACM)