1980 Mercury Zephyr Motor Oil

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grades will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

75,000 miles is more than a mile marker. It’s a signal that your engine is ready for greater protection. That’s when you need Valvoline High Mileage with MaxLife Technology Motor Oil. Its exclusive formula is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles. Our mixture is specially developed with a unique combination of synthetic and premium conventional oils to protect your high-mileage motor against wear, friction, heat, and deposits – the four major causes of engine breakdown and expensive repairs. Anti-wear additives defend critical engine components, advanced friction-fighting agents reduce heat and abrasion, added detergents clean the inside of your engine, and premium seal conditioners handle aging seals to prevent leaks. It fights sludge, corrosion and rust that can rob your engine of horsepower, fuel efficiency and longevity. From extreme temperatures and cold starts to stop-and-go traffic and frequent short trips, viscosity modifiers make sure the oil flows more easily, coats more completely, and resists thermal breakdown under even the most intense driving conditions. Its unique mixture curbs contaminants to keep high-mileage engines from burning and consuming oil that can foul spark plugs, creating higher emissions and causing your motor to run roughly.

Product Features:

• Maxlife technology prevents engine breakdown with 40% better wear protection than the industry standard
• Refresh aging seals and prevent leaks with seal conditioners
• Reduce sludge, deposits, corrosion, and rust with added detergents – keep motors clean inside
• Enhanced friction performance helps maximize power with advanced friction-fighting agents
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• MaxLife Technology: The exclusive formula of Valvoline High Mileage with MaxLife Technology Engine Oil is proven to maximize engine life in cars, trucks, and SUVs with over 75,000 miles.

FRAM Engine Oil Full Synthetic SAE 10W-30 is a full synthetic motor oil blended with high  quality synthetic base stocks and the latest additive technology to provide the ultimate protection  for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI)  and turbo gas-direct engine (TGDI) designs as well as providing increased protection for  carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 10W-30  contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead  to pre-mature engine failure and is a major concern of the automotive industry for vehicles  employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation  and shear stability over previous oil categories.

Product Features:

• Outstanding thermal and oxidation stability
• Excellent sludge and varnish protection
• Faster oil flow at start-up
• Volatility: lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Ultimate engine protection: FRAM Full Synthetic Oil 10W30 1 QT is specifically formulated with high-quality synthetic base stocks and advanced additive technology to provide the ultimate protection for your engine, ensuring its longevity and performance.

Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive. Today’s engines are smaller, more powerful and under more pressure than ever before. Castrol EDGE has been engineered to withstand the stress of modern engines and provides 10X better high temperature performance than the latest industry standard. Did you know that friction can waste up to 10% of an engine’s performance? Increased demands placed on the engine to deliver power and fuel efficiency create intense friction between critical engine parts. Castrol EDGE transforms its structure under pressure to keep metal apart and reduce friction for maximum engine performance and delivers 6X better wear protection than required by the latest Sequence IVA test limits.

Product Features:

• 3x stronger against viscosity breakdown than leading full synthetic (based on kurt orbahn test in 5W-30 grade)
• 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
• 6x better wear protection
• 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
• Full Synthetic Oil Composition: Castrol EDGE w/SPT Engine Oil is a full synthetic oil that contains new powerful dispersant molecules, providing superior engine protection and performance.
• Strongest Oil: Castrol EDGE with Fluid TITANIUM Technology is Castrol’s strongest oil, providing the best combination of sludge protection, wear protection, and maximum engine performance.

FRAM Engine Oil SAE 10W-40 engine oil utilizes high-quality base stocks and a robustï additive system to provide reliable engine protection across a broad range of operatingï conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engineï designs. FRAM Engine Oil SAE 10W-40 contains additive technology designed to preventï low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation andï shear stability over previous oil categories. The FRAM Engine Oil SAE 10W-40 meets theï requirements for API SP, SN Plus, SN, SM and earlier API Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:

• Phosphorus Replacement Technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (Based on API and ACEA volatility specifications)
• Improved fuel economy (In 5W-20, 5W-30 and 10W-30 grades versus industry specifications)

Castrol EDGE with Fluid TITANIUM Technology, is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive.

Product Features:

• 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
• 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
• 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
• Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M and 4718M, Meets engine test requirements of Chrysler MS 6395

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• Extends engine life: MaxLife High Mileage Full Synthetic Oil is designed to extend the life of higher mileage vehicles, providing superior protection against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs

10W-30 Small Engine 10W-30 Conventional Oil: 1 Quart

Castrol EDGE High Mileage with Fluid TITANIUM Technology is the natural choice for drivers who demand maximum performance from their high mileage cars, which often operate at extreme temperatures. Castrol EDGE High Mileage provides up to 10X better high temperature performance than the latest industry standard to ensure optimal protection and oil flow over the drive cycle. As your car ages, it can lose performance and efficiency and is also more prone to catalytic converter failure. Castrol EDGE High Mileage is liquid engineered with Phosphorous Replacement Technology to reduce harmful phosphorus to protect the catalytic converter and preserve the life of your emission system. Castrol EDGE High Mileage helps your car defy its miles and extend maximum performance.

Product Features:

• Patented phosphorus replacement technology to help extend the life of your emission system
• 10x better high temperature performance (as measured in sequence iiih engine test vs. api sp test limit)
• 6x better wear protection (as measured in latest sequence iva engine test)
• 1.4x better sludge protection (as measured in sequence vh engine test vs. api sp test limit)
• Maximum Performance: Castrol EDGE High Mileage Engine Oil is designed to provide maximum performance for high mileage cars that often operate at extreme temperatures.
• Improved High Temperature Performance: With up to 10X better high temperature performance than the latest industry standard, Castrol EDGE High Mileage Engine Oil ensures optimal protection and oil flow over the drive cycle.

FRAM Engine Oil SAE 20W-50 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 20W-50 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 20W-50 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-Speed Pre-Ignition Control
• Chain Wear Protection
• Piston Cleanliness
• Turbo-Compatibility
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-speed pre-ignition control
• Chain wear protection
• Piston cleanliness
• Turbo-compatibility
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Suitable for modern engines: Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs.

Sludge can block your engine’s vital oilways like cholesterol and if untreated, can rob an engine of its power and ultimately its life. Castrol GTX is a premium conventional motor oil that has been helping to extend engine life for over 50 years. It has evolved to meet the needs of consumers and vehicle manufacturers since 1968 and continues to innovate and remain a trusted brand today. Severe driving conditions such as heavy traffic, poor fuel quality, harsh driving conditions and exceeding oil change intervals can all cause the build-up of a thick, tar like substance called sludge. If untreated, it can rob a car’s engine of its power and ultimately its life. GTX is specially engineered to prevent harmful build-up of sludge while protecting against new oil splatter formation better than tough industry standards. Help Extend the Life of Your Engine with Castrol GTX.

Product Features:

• Superior protection against engine sludge (When tested in engines with a high level of sludge)
• Advanced protection against viscosity and thermal breakdown
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption

Castrol EDGE Extended Performance with Fluid TITANIUM Technology, is Castrol’s most advanced full synthetic and the natural choice for drivers who demand outstanding performance and the assurance of protection during today’s longer drain intervals. It provides protection for 20,000 miles or a full year – guaranteed. Castrol EDGE Extended Performance features some of the best attributes of Castrol’s patented Fluid TITANIUM Technology that transforms its structure to be stronger under pressure. It helps keep metal apart to fight power-robbing friction, providing wear protection 6X better than required by the industry standard, while protecting under extreme conditions with 10X better high temperature performance. Castrol EDGE Extended Performance provides the strength to extend drains for 20,000 miles and the muscle to maintain viscosity stability under the extreme force of the engine and protection from wear.  Unlock maximum engine performance.

Product Features:

• Extended drain interval of 20,000 miles or a full year (Whichever comes first)
• 10X Better High Temperature performance (As measured in Sequence IIIH engine test vs. API SP test limit)
• 6X Better Wear Protection (As measured in the latest Sequence IVA engine test)
• 1.4X Better Sludge Protection (As measured in Sequence VH engine test vs. API SP test limit)

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos®1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos®1 Gen 3 motor oil.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

Castrol® EDGE® High Mileage is 3X stronger against viscosity breakdown than the leading full synthetic oil. Castrol EDGE High Mileage full synthetic motor oil is designed for older cars with over 75,000 miles that need a high mileage oil to protect worn seals, prevent leaks, remove engine sludge and prevent wear and tear of the engine. As your car ages, its engine can lose performance and efficiency. Proper maintenance is critical to keep your older car performing at its best. Tested in the ASTM D6278 test in the 5W-30 viscosity grade.

Product Features:

• Boosted with extra fluid titanium technology to protect your older engine
• Maximizes short and long term engine performance on high mileage engines
• Reduces leaks, oil burn off and power-robbing deposits
• Improves fuel economy
• Castrol EDGE offers motor oils that meet OEM specification approvals or licenses that cover over 97.3% of the US car parc.
• Available in the following grades: 5W-20, 5W-30, 10W-30, and 10W-40
• Try Castrol EDGE High Mileage today

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. It’s a synthetic blend motor oil that helps extend the life of your engine by protecting against sludge, wear and burn-off. Castrol GTX High Mileage is also engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage is formulated with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system, there is no better choice than Castrol GTX High Mileage.

Product Features:

• Phosphorus replacement technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
• Seal conditioners to help reduce leaks
• Advanced additives that minimize engine wear
• Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
• Meets or exceeds api sp/sn plus/sn, ilsac gf-6 and latest ford specs

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• High Mileage Protection: Valvoline Full Synthetic High Mileage Engine Oil is specially designed to protect engines with over 75,000 miles against wear, friction, heat, and deposits, ensuring a longer lifespan for your vehicle.

FRAM Engine Oil Full Synthetic SAE 5W-30 is a full synthetic motor oil blended with high quality synthetic base stocks and the latest additive technology to meet the stringent API: SP, SN, SM, SL, SJ, GM dexos1 Gen 3 and ILSAC GF-6A specifications to provide the ultimate protection for your engine. Specifically formulated for the rigorous environment of gas-direct engine (GDI) and turbo gas-direct engine (TGDI) designs as well as providing increased protection for carbureted or normally fuel injected engines. FRAM Engine Oil Full Synthetic SAE 5W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI). LSPI can lead to pre-mature engine failure and is a major concern of the automotive industry for vehicles employing GDI or TGDI technology. This oil also provides increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil Full Synthetic SAE 5W-30 and is a fully licensed GM dexos1 Gen 3 motor oil.

Product Features:

• Faster oil flow at start-up
• Fuel efficiency gains over heavier grade oils
• Excellent sludge and varnish protection
• Outstanding thermal and oxidation stability
• Lowers oil vaporization and consumption at extreme conditions
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.

CASTROL EDGE High Mileage 10W-30 Full Synthetic Motor Oil 1 Quart is the perfect solution for vehicles with over 75K miles. It is formulated with Fluid Titanium Technology and Phosphorus Replacement Technology to provide 10X better high-temperature performance and 6X better wear protection. This motor oil meets API SP/SN PLUS, ILSAC GF-6, GM 6094M standards and offers motor oils that meet OEM specifications. It is available in different grades, including 5W-20, 5W-30, and 10W-30. This motor oil is the natural choice for consumers who want to extend maximum engine performance and preserve the catalytic converter and the emission system. Try CASTROL EDGE High Mileage today and experience the difference in your vehicle’s performance.

Product Features:

• 10x better high temperature performance – as measured in seq iiih engine test vs. api sp limit
• 6x better wear protection – as measured in seq iva test vs. latest test limit
• From the makers of the No. 1 high mileage brand
• Meets api sp/sn plus, ilsac gf-6, gm 6094m
• Castrol edge offers engine oils that meet oem specification approvals or licenses that cover over 97.3% of the us car parc.
• Available in the following grades: 5w-20, 5w-30, 10w-30, and 10w-40
• Try castrol edge high mileage today

Castrol EDGE with Fluid TITANIUM Technology, is Castrol’s strongest oil and the natural choice for drivers who want the best combination of sludge protection, wear protection and maximum engine performance. Unlock maximum performance with every drive.

Product Features:

• 3X Stronger against viscosity breakdown than the leading full synthetic – Based on Kurt Orbahn test in 5W-30 grade
• 10X Better High Temperature performance – As measured in Seq IIIH engine test vs. API SP limit
• 6X Better Wear Protection – As measured in Seq IVA test vs. latest test limit
• Meets API SP/SN PLUS, ILSAC GF-6, ACEA A1/B1, GM 6094M and 4718M, Meets engine test requirements of Chrysler MS 6395

Castrol® EDGE® Extended Performance is Castrol’s most advanced full synthetic motor oil. It provides ultimate performance and the strength to enable an extended drain of 20,000 miles or a full year (whichever comes first).

Product Features:

• Approved and Licensed Specifications include: API SP/SN PLUS, ILSAC GF-6, GM dexos1 Gen 2, ACEA A5/B5, ACEA C2, Ford WSS-M2C961-A1, Meets engine test performance of Chrysler MS-6395 and MS-13340
• 10X Better High Temperature Performance (Seq IIIH test vs. API SP limit)
• 6X Better Wear Protection (Based on Seq IVA vs. latest test limit)

FRAM Conventional High Mileage 5W30 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 5W30 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF, and 5W30 grade will also meet or exceed the ILSAC GF-6A Resource Conserving Service Category.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Specially formulated for engines with over 75,000 miles to help reduce leaks and oil consumption.

Castrol GTX High Mileage motor oil is the leading consumer high-mileage brand. You won’t need to worry about using a high mileage oil or synthetic because this is both. It’s a synthetic blend engine oil that helps extend the life of your engine by protecting against sludge, wear and burn-off and also liquid engineered to protect your emission system. One of the leading causes of ‘check engine’ lights coming on in high mileage cars is actually catalytic converter failure, which can be caused by phosphorous in engine oil. While phosphorous is present in all engine oils for its ability to reduce wear, it is effectively poisonous to catalytic converters. Castrol GTX High Mileage Motor Oil is liquid engineered with Phosphorous Replacement Technology to replace some of the phosphorous with an advanced additive that maintains robust wear protection. When you want to extend the life of your high mileage engine and emission system and find out how many miles you can go on a high-mileage oil, there is no better choice than Castrol GTX High Mileage Motor Oil.

Product Features:

• Phosphorus replacement technology to help extend the life of the emission system
• Superior dispersancy that fights sludge build up
• Exceptional oil burn-off protection exceeding industry standards (based on api and acea volatility specifications)
• Improved fuel economy (in 5w-20, 5w-30 and 10w-30 grades versus industry specifications)
• Provides extra protection for older vehicles: Castrol GTX High Mileage Engine Oil is specifically designed to provide extra protection for high mileage engines, helping to extend the life of your vehicle.
• Synthetic blend composition: This engine oil is a synthetic blend, combining the benefits of both conventional and synthetic oils to provide superior protection against sludge, wear, and burn-off.

FRAM Conventional High Mileage 10W40 Engine Oil is specially designed with enhanced  additives to help reduce leaks and oil consumption in worn or higher mileage engines. This oil is formulated to help clean out sludge buildup and keep engines running clean and with  increased efficiency and power. They are specially designed for engines with over 75,000 miles.  FRAM Conventional High Mileage 10W40 Engine Oil will protect domestic and imported vehicles and  equipment powered with either gasoline or light duty diesel engines – even those that are turbo charged or super-charged. This high-quality oil is specifically formulated to meet or exceed  all new car manufacturers’ warranty requirements as well as the stringent industry standards API  SP/CF.

Product Features:

• Formulated with a unique combination of premium base oils and an enhanced additive system
• Provides increased protection in higher mileage engines
• Helps restore seal condition to reduce oil consumption
• Increases protection against high temperature deposits and ring sticking
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.

FRAM Engine Oil SAE 30 is single grade or straight-viscosity motor oil that meets the stringent API SP, SN Plus / SN, SM, SL & CF specifications. It contains a balanced blend of high VI base stocks and an advanced additive package to deliver superior performance. It is designed to provide thermal and oxidation stability, deposit control, anti-wear protection, corrosion protection and improved pumpability. FRAM Engine Oil SAE 30 may be used in turbo-charged or naturally aspirated foreign and domestic engines recommending straight weight API SP/CF quality oil. This motor oil exceeds the stringent lubricating performance requirements of American, European, Korean, Japanese and other worldwide engine manufacturers where straight weight engine oil is recommended.

Product Features:

• Resists breakdown in severe engine environments
• Effectively prevents the formation of sludge and varnish deposits
• Reduces engine wear
• Turbo approved
• Always refer to your vehicles operating manual to select the correct grade oil for your engine.
• Superior Performance: FRAM Engine Oil SAE 30 is formulated with a balanced blend of high VI base stocks and advanced additives to deliver superior performance, ensuring your engine runs smoothly and efficiently.

Upgrading your motor oil to Valvoline Full Synthetic High Mileage with MaxLife Technology can help you increase the longevity of your car, truck or SUV with over 75,000 miles. It’s proven to protect your high-mileage motor against wear, friction, heat, and deposits – the leading causes of engine breakdown and expensive repairs. Our exclusive formulation goes beyond industry standards to protect your engine. It’s fortified with enhanced wear additives and friction-fighting agents to safeguard critical engine components, extra detergents to clean inside your engine, and premium seal conditioners to restore aging seals and prevent leaks. Superior viscosity modifiers and high-quality base oils help it perform exceptionally in both high and low temperatures. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Enhanced maxlife technology prevents engine breakdown in extreme conditions with 50% better wear protection than the industry standard
• Treat and prevent leaks with premium seal conditioners to keep oil out of places it shouldn’t be
• 25% extra defense against deposits, sludge, corrosion and rust via interior-cleansing detergents
• Extreme temperature protection through our high-quality base oils and superior viscosity modifiers
• Meets or exceeds all requirements of ilsac gf-6a, api sp, api sn with sn plus, api sn
• MaxLife High Mileage Synthetic Engine Oil is specially designed for engines with over 75,000 miles, providing ultimate protection against wear, friction, heat, and deposits.

FRAM Engine Oil SAE 10W-30 utilizes a blend of high-quality conventional base stocks coupled with a robust additive system to provide reliable engine protection across a broad range of operating conditions. Specifically formulated for use in modern gas-direct engines (GDI) and turbo gas-direct engines (TGDI) as well as older carbureted or normally fuel injected gasoline engine designs. FRAM Engine Oil SAE 10W-30 contains additive technology designed to prevent low-speed pre-ignition (LSPI) while also providing increased wear protection, oxidation and shear stability over previous oil categories. FRAM Engine Oil SAE 10W-30 meets the requirements for API SP, SN Plus, SN, SM and ILSAC GF-6A, GF-5 and earlier API and ILSAC Service Categories.

Product Features:

• Low-Speed Pre-Ignition Control
• Chain Wear Protection
• Piston Cleanliness
• Turbo-Compatibility
• ALWAYS REFER TO YOUR VEHICLES OPERATING MANUAL TO SELECT THE CORRECT GRADE OIL FOR YOUR ENGINE.