2017 Nissan Frontier Towing Products

Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights.

Product Features:

• For vehicles equipped with independent bulb turn signals or common bulb systems
• Protects tow vehicle electronics from wiring shorts
• Includes 14 ga. power lead wire, fuse & fuse assembly, splices, and cable ties
• Powers up to 5.0 amps per output
• Receives power directly from the battery
• Includes vehicle side 4 flat
• Includes dust cover and grease packet to prevent corrosion
• Includes Dust Cover And Grease Packet To Prevent Corrosion

When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicle’s electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname “taillight converters”. Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution. This converter wiring kit is intended to be used with various CURT powered taillight converters. Powered converters require a direct connection to the vehicle’s battery, and the powered converter wiring kit #55151 provides all of the components needed to establish a secure connection. The kit includes 20 feet of 12 gauge wire, a 10-amp fuse, an in-line fuse holder, a 3/8″ ring terminal, a butt connector, a 14-1/2″ cable tie and eight 6″ cable ties. This wiring kit is rated at 10 amps and comes included with CURT powered electrical converters #59146, #59187, #59190, #59200 and #59201.

Product Features:

• Routes power from vehicle battery to powered converter
• Designed for use with battery-powered electrical converters
• 20′ of 12 gauge cross-linked wire for flexible installation

The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.

Product Features:

• 60 inch length
• Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
• Double-molded weatherproof design
• Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
• Includes 4 wire flat extension
• Includes vehicle side 4 flat
• Includes dust cover and grease packet to prevent corrosion
• Includes Dust Cover And Grease Packet To Prevent Corrosion

A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM USCAR connector and offers a 4-way flat and 6-way round connector (see application info to verify fitment with your vehicle). It also comes with a mounting bracket for easy installation. CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:

• Plugs into USCAR socket to provide 4-way and 6-way trailer wiring connectors
• Fits USCAR-equipped vehicles with factory tow plugs only
• Simple plug-and-play design eliminates the need for cutting or splicing
• 4-way flat output connects tail lights, brake lights and turn signals
• 6-way round socket adds connection for electric brakes and auxiliary power
• Dust covers included to keep connectors clean when not in use
• Slit loom keeps wires contained and well protected
• Metal bracket securely mounts wiring to the vehicle or trailer hitch

A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 7-way RV blade connector. It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:

• Plugs into USCAR socket to provide 4-way and 7-way trailer wiring connectors
• Fits USCAR-equipped vehicles with factory tow plugs only
• Simple plug-and-play design eliminates the need for cutting or splicing
• 4-way flat output connects tail lights, brake lights and turn signals
• 7-way RV blade socket adds reverse lights, electric brakes and auxiliary power
• Dust covers included to keep connectors clean when not in use
• Slit loom keeps wires contained and well protected
• Metal bracket securely mounts wiring to the vehicle or trailer hitch

Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way OEM USCAR replacement connector is designed to plug into a twist-in OEM vehicle socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection (see application info to verify fitment with your vehicle).

Product Features:

• Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
• Twist-in, plug-and-play design eliminates the need for cutting or splicing
• 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
• Spring-loaded dust cover keeps connector clean when not in use

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

CURT custom wiring connectors and harnesses are the easiest way to outfit your vehicle with a trailer wiring connection for towing. Each one is custom-fitted to work with a specific make and model. This particular 7-way RV blade socket is designed to be a custom wiring option for certain years of the Nissan Frontier, Pathfinder, Xterra and Suzuki Equator (see application info to verify fitment). It provides a universal trailer connection for the tail lights, brake lights, reverse lights, turn signals, electronic trailer brakes and auxiliary power. 7prong taillight wiring can be used as a replacement or new wiring and is typically used for towing fifth wheel and gooseneck trailers. This 7 way female outlet comes with all necessary hardware to establish a solid connection, as well as a dust cover to keep the connector socket clean when not in use. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this factory tow package socket is not equipped on every vehicle, a CURT custom wiring connector (also called a T-connector) utilizes the socket for simple, stress-free installation. Instead of cutting, splicing and soldering into your vehicle’s wiring system, the custom wiring connector uses a single OEM compatible plug and instantly provides a standard vehicle-to-trailer hitch wiring connection. To ensure long-lasting reliability, all CURT custom connector wiring is thoroughly tested for optimal functionality.

Product Features:

• Plugs into existing OEM vehicle socket to provide a 7-way RV blade socket
• Simple plug-and-play design eliminates the need for cutting or splicing
• 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
• Spring-loaded dust cover keeps connector clean when not in use
• Slit loom keeps wires contained and well protected

Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer connector, plugging into a standard USCAR socket (see application info to verify fitment with your vehicle). It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection.

Product Features:

• Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
• Simple plug-and-play design eliminates the need for cutting or splicing
• 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
• Spring-loaded dust cover keeps connector clean when not in use

A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 3,500 lbs. GTW and 350 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Nissan Frontier, Nissan Pathfinder and Suzuki Equator (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Product Features:

• Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight
• Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
• Made with a vehicle-specific design for a custom fit
• Provides a convenient mount for hitch accessories
• Ideal for attaching a snow plow, cargo carrier or other front hitch mount
• Allows for easy maneuvering of a trailer into a tight spot
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Nissan Frontier and Suzuki Equator (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 800 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

• Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
• Compatible with weight distribution hitch (8,000 lbs. WD / 800 lbs. WDTW)
• Engineered with a vehicle-specific design for a custom fit
• Concealed main body for OE look and seamless integration with the vehicle
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid A-coat, inside and out
• Equipped with an open-back receiver for easy cleaning
• Made in USA (may include imported hardware)

A CURT trailer hitch is the key to pursuing your passions, whether you’re taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Nissan Frontier (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 300 pounds tongue weight. It is also equipped with 1-1/4″ x 1-1/4″ hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4″ trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid Bonderite for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.

Product Features:

• Rated to 3,500 lbs. gross trailer weight and 300 lbs. tongue weight
• Engineered with a vehicle-specific design for a custom fit
• Concealed main body for OE look and seamless integration with the vehicle
• Tested for safety in accordance with SAE J684
• Precisely welded for superior strength and fit
• Protected by a durable high-gloss black powder coat finish
• Co-cured in a rust-resistant liquid Bonderite coating
• Equipped with an open-back receiver for easy cleaning
• 1-1/4″ x 1-1/4″ ball mount features a 3/4″ hole to accept a trailer ball shank
• Ball mount can be flipped to provide drop or rise for level towing
• Made in USA (may include imported hardware)

The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
• Strongest And Easy Installation

LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.

Product Features:

• Easier Entry And Exit From Your Vehicle
• Wide Functional Step Area
• Extends Further Than Our Current Steps
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
• New Aggressive And Appealing Tread Design For A Non-Slip Surface
• Unique Design That Enhances The Looks Of Current Vehicle Body Styles
• Resists Scratches, Peeling And Fading
• Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products

Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
• Strongest And Easy Installation

Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
• Strongest And Easy Installation

The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
• Strongest And Easy Installation

The stylish and innovative design of these steps add to a vehicle rugged off road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.

Product Features:

• Exclusive New Multi Mount System
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
• Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
• Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
• Strong Construction To Hold Up Under Extreme Conditions
• Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
• Strongest And Easy Installation

LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.

Product Features:

• Easier Entry And Exit From Your Vehicle
• Wide Functional Step Area
• Extends Further Than Our Current Steps
• Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
• New Aggressive And Appealing Tread Design For A Non-Slip Surface
• Unique Design That Enhances The Looks Of Current Vehicle Body Styles
• Resists Scratches, Peeling And Fading
• Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products

A CURT Quick Plug brake controller wiring adapter is one of the fastest and easiest ways to plug your brake controller into your vehicle. It requires no cutting or splicing! Just insert the vehicle-specific plug end into the OEM vehicle’s factory brake controller socket. The other end plugs into your CURT trailer brake controller. Quick Plug harnesses are available for a variety of vehicles and are unique for each vehicle application to provide the easiest possible installation. This particular brake controller harness fits certain years of the Nissan Armada, Frontier, NV1500, NV200, NV2500, NV3500, Pathfinder, Titan, Titan XD, Xterra, Infiniti QX56, QX60 and QX80 (see application info to verify fitment). CURT Quick Plug harnesses are compatible with most CURT brake controls and can be used as a replacement or for a new control unit installation. They’re also great for towing all types of trailers with electric brakes. For versatile mounting of your trailer brake controller this Quick Plug wire harness measures two feet long. It also features a slit loom sleeve to keep the wires protected against crushing and abrasions. CURT Quick Plug wire plug-in adapters are made with 12-gauge wires for a reliable connection and braking, and come with zip ties to keep the harness contained and out of sight.

Product Features:

• Allows a CURT trailer brake controller to be plugged into OEM socket
• Quick plug harness installs with plug-and-play convenience
• Wire colors match standard brake controller harnesses
• Includes 24″ of 12 gauge wire for flexible installation
• Slit-loom sleeve keeps wires contained and protected