2017 Mercedes-Benz CLS400 Engine Cooling Parts
More 2017 Mercedes-Benz CLS400 Engine Cooling Parts
Find your specific 2017 Mercedes-Benz CLS400 original or aftermarket Engine Cooling Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2017 Mercedes-Benz CLS400 Engine Cooling Parts
Carquest Premium – Coolant Temperature Sensor with O-Ring and Install Clip (Part No.WTC1122)
from
$19.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Motorad – Integrated Thermostat Housing: With Sensor, Spring Clip, Seal, 212 Degrees (Part No.785-212)
from
$257.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Dorman – Thermostat Assembly: Includes Housing, Sensor, O-Ring, and Seal, 212 Degrees (Part No.902-5843)
from
$352.99
This replacement engine coolant thermostat housing assembly is engineered to match the fit and durability of the stock housing assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this engine coolant thermostat housing assembly directly replaces the original water outlet on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housing assemblies
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
Dorman – Auxiliary Coolant Pump (Part No.902-065)
from
$193.99
This engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this engine auxiliary water pump is designed to match the fit and function of the original pump on specified applications
- Restores functionality – reliable replacement for an original pump that has failed to provide sufficient water flow
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – New Auxiliary Water Pump (Part No.T1380)
from
$252.99
This new pump is 100% tested to ensure the highest quality. Each unit is built to meet or exceed all OE specifications and is validated for fit, form, and function. Application specific design to ensure a perfect fit and correct operation for unsurpassed quality.
Product Features:
See More
Product Features:
- Electric water pump
- Specialized for vehicles using supplemented cooling for the engine or components
- Plastic housing
- All components necessary for installation are supplied with pump
- Follow all enclosed instructions to maximize pump life and validate warranty
Bosch – Auxiliary Water Pump (Part No.G30501098083BOS)
from
$187.27
Restore your vehicle’s cooling system to proper working order, and minimize the risk of premature failure, by installing a Bosch Auxiliary Water Pump. Bosch Auxiliary Water Pumps are designed to operate in the highly-stressful environment of today’s cooling systems. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.
Product Features:
See More
Product Features:
- OE Quality, reliability and service life
- Leak-proof sealing of the drive
- Fuel savings and reduced emissions
- Cooling even without operation of the engine
- CO²-reduction by optimized efficiency, speed control and reduced weight
- Coverage of a wide hydraulic performance range
- Reduced noise level
Behr – Behr Expansion Tank (Part No.G1030461987BEH)
from
$54.53
The Behr expansion tank is made of the highest quality materials and is engineered to meet or exceed the OEM specifications for performance, fit and durability.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct Fit for easy Installation.
- OE style connections and fittings.
- Made of highly durable materials.
- Resistant to thermal wear and cracking.
Rein – Expansion Tank (Part No.EPT0029)
from
$54.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.
Product Features:
See More
Product Features:
- Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
- Resistant to cracking and wear from heat cycles preventing coolant loss
- Direct fitment allows easy installation
- Manufactured to strict engineering standards/specifications in materials and tolerances
Dorman – Pressurized Coolant Reservoir: Black And Clear, Plastic, Original Equipment Replacement (Part No.603-257)
from
$61.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.
Product Features:
See More
Product Features:
- Direct replacement – this engine coolant reservoir matches the fit and function of the original part
- Ideal solution – engineered for a seamless installation
- Durable construction – manufactured from quality materials to withstand underhood heat and vibration
- Trustworthy design – backed by 100 years of automotive aftermarket experience
Rein – Radiator Mount (Part No.AVM0699)
from
$19.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.
Product Features:
See More
Product Features:
- Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
- Part has a high corrosion resistance for maximum life.
- Produced with high quality materials to ensure maximum life and a smooth ride.
- Made by the OE manufacturer.
Carquest Premium – Engine Coolant Reservoir Cap (Part No.10253)
from
$19.79
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Popular 2017 Mercedes-Benz CLS400 Engine Cooling Parts Categories
2017 Mercedes-Benz CLS400 Engine Cooling Parts
Maybe you’re in the middle of a full rebuild of that 2017 Mercedes-Benz CLS400. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 14 different Engine Cooling Parts in our inventory ranging from $2.46 to $352.99. That means you can find the exact parts or products you need to keep that 2017 Mercedes-Benz CLS400 running smoothly.
Engine Cooling Parts are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2017 Mercedes-Benz CLS400. Carquest Premium, Behr, and Motorad are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Engine Cooling Parts for your 2017 Mercedes-Benz CLS400, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Engine Cooling Parts to keep your 2017 Mercedes-Benz CLS400 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Engine Cooling Parts Brands To Make Your 2017 Mercedes-Benz CLS400 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2017 Mercedes-Benz CLS400 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your CLS400 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.
Popular Carquest Premium Engine Cooling Parts
We carry Carquest Premium parts in our stock across Coolant Reservoir Caps categories, plus more. For a 2017 Mercedes-Benz CLS400, our most popular Carquest Premium Engine Cooling Parts include:
FAQs for 2017 Mercedes-Benz CLS400 Engine Cooling Parts
What are the most purchased Engine Cooling Parts for the 2017 Mercedes-Benz CLS400?
Out of 14 Engine Cooling Parts for the 2017 Mercedes-Benz CLS400, the most popular in our inventory are:
from
$19.99
This product is not rated
Coolant Temperature Sensor with O-Ring and Install Clip
Coolant Temperature Sensors
