2017 Jeep Wrangler Suspension Parts

Essential 2017 Jeep Wrangler Suspension Parts

Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)

DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart

from

$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

MOOG – Coil Spring Set (Part No.81222)

Coil Spring Set

from

$99.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Shock-Mate Shock Absorber Boot Kit

from

$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Firestone Ride-Rite – Controls Two Air Springs Simultaneously, With Compressor/Wiring Harness/Sensors (Part No.2543)

Controls Two Air Springs Simultaneously, With Compressor/Wiring Harness/Sensors

from

$1154.99
While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:
  • Controls Two Air Springs Simultaneously
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Single Point Fill (Both Air Springs Fill To The Same Pressure)
  • Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)
See More

Crown Auto Jeep Replacmnt – Polyurethane, Single, Large (Part No.52040007)

Polyurethane, Single, Large

from

$22.79
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Metal And Rubber Construction
  • Meets Quality Standards
  • Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
  • Easy To Install
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Skyjacker – Hydro Shock W/Red Boot (Part No.H7087)

Hydro Shock W/Red Boot

from

$55.99
HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:
  • Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
  • Multi Stage Velocity Sensitive Valving
  • Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
  • Bonded Iron Piston For Durability And Longer Shock Life
  • Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
  • Orifice Disk For Axle Control In Any Condition
  • Red Polyurethane Bushings
See More

Rancho – Suspension System (Part No.RS66118BR9)

Suspension System

from

$839.99
Get your 2-door Jeep® Wrangler JK ready for a day on the trail with the Rancho® 2-in. Progressive Sport suspension system. This premium suspension system features Rancho RS9000®XL front and rear shocks that allow customized damping control.

Product Features:
  • COMPATIBILITY — Designed for 2-door Jeep Wrangler JK
  • BUILT FOR THE TRAIL — Designed to fit up to 33-in. tires, get 2-in. of additional ground clearance needed for trail riding or on-road driving (can accommodate 35-in. tires with trimming, bumpers, sliders, winches, etc. affect lift height)
  • COMPLETE SOLUTION — Kit includes four Rancho RS9000®XL shocks, front and rear progressive rate coil springs, front bump stops, rear brake line relocation brackets and mounting hardware
  • NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
  • SUPERIOR PERFORMANCE — Front and rear progressive rate coil springs, specifically tuned to provide superior on-road comfort and off-road performance
  • EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
  • NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 33-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)
See More

Skyjacker – Hydraulic, Limited Lifetime Warranty, Non-Adjustable, Includes Dust Boot, Single (Part No.H7025)

Hydraulic, Limited Lifetime Warranty, Non-Adjustable, Includes Dust Boot, Single

from

$58.99
HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:
  • Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
  • Multi Stage Velocity Sensitive Valving
  • Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
  • Bonded Iron Piston For Durability And Longer Shock Life
  • Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
  • Orifice Disk For Axle Control In Any Condition
  • Red Polyurethane Bushings
See More

Energy Suspension – LeafSpBumper (Part No.2.9103G)

LeafSpBumper

from

$40.99
LeafSpBumper

MOOG – Control Arm (Part No.RK643730)

Control Arm

from

$52.99
Control Arm

aFe POWER – Air Compressor Mount (Part No.46-79001)

Air Compressor Mount

from

$437.99
aFe Power is proud to introduce the all new “Glide Guard” On-Board Compressor & Tank Mount. The Glide Guard comes powder-coated in a matte black finish with counter-sunk compressor & tank mounting holes for protection. Once the required aFe left side exit exhaust system (sold separately) is installed, the skid plate mounts neatly in the former factory muffler location tucking your air compressor and tank as high as possible (air compressor and tank not included). The Glide Guard is constructed out of 3/16″ thick steel to withstand extreme off-road conditions. This system bolts in utilizing factory locations and an additional 4 drilled holes with heavy-duty nut plates for a hassle-free install.

Product Features:
  • 3/16 in. Thick Steel For Strength And Rigidity
  • Maximum Corrosion Protection
  • Counter Sunk Compressor
  • Factory Attachment Points
See More

MOOG – Control Arm Bushing (Part No.K200308)

Control Arm Bushing

from

$28.99
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
  • OE-STYLE DESIGN — Engineered to match or exceed OE requirements
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Bushings manufactured from high quality elastomer compounds for durability and ride performance
  • Assembled with proper precompression for ultimate in performance and feel
See More

Rancho – Coil Spring Set (Part No.RS6417B)

Coil Spring Set

from

$253.99
Specifically tuned to provide enhanced off-road control, Rancho® rear coil springs deliver 2.5-in. of lift so your Jeep® Wrangler TJ/LJ can accommodate larger wheel/tire combinations.

Product Features:
  • COMPATIBILITY — Designed for Jeep Wrangler TJ/LJ
  • IMPROVES PERFORMANCE — Specifically tuned to deliver enhanced off-road control
  • FITS LARGER TIRES — Provides up to 2.5-in. of lift to accommodate larger wheel/tires (tire size varies by manufacturer, 2-door models, aftermarket bumpers, sliders, winches, etc. affect lift height)
  • EASY TO INSTALL — Kit includes two rear coil springs that install easily with included hardware
  • RESISTS CORROSION — Powder-coated to resist rust and corrosion
  • ENGINEERED TO LAST — Made of high-strength steel that is shot peened and heat treated for long life
See More

aFe POWER – Sway-A-Way Shock Kit (Part No.402-0056-13)

Sway-A-Way Shock Kit

from

$1689.99
aFe Control is proud to introduce the recently acquired Sway-A-Way line of High Performance replacement shock absorbers. These shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These are 100% designed and built in the USA. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:
  • CNC Machined Components Made To The Strictest Tolerances
  • Polished Nitro Steel Shaft for Strength And Durability
  • Teflon Lined Steel Spherical Bearings
  • Multi-Seal Carrier To Ensure Zero Leakage
See More

Energy Suspension – Hyper-Flex System (Part No.2.18101R)

Hyper-Flex System

from

$356.99
Product Features:
  • Incredible Improvement in Control
  • Maintains Proper Caster and Camber Alignment
  • Increase in Handling and Control
  • Greatly Reduce Wheel Hop on Quick Acceleration
  • Even Braking Control is Improved
  • Better Suspension Stability
See More

Timbren SES – Rubber Spring, Weld On Bump Stop Mount, 2400 Lb Capacity Per Set, Hollow Rubber (Part No.JFTJ)

Rubber Spring, Weld On Bump Stop Mount, 2400 Lb Capacity Per Set, Hollow Rubber

from

$306.99
This SES Suspension upgrade fits the front suspension of a Jeep Wrangler TJ, JK and JL. Each laser-cut piece of steel is precision welded and powder-coated to ensure a quality fit. We have engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes down on the rubber springs (weight from a snowplow or heavy aftermarket accessories ¿ such as a steel bumper) the harder they work to prevent front-end sag. This SES Suspension Upgrade replaces the jounce stop inside the coil spring. Its unique design ensures superb ride quality ¿ loaded or unloaded. (There should be a 0.5 Inch to 1 Inch gap between rubber spring and axle to ensure unloaded ride quality.) Unlike other auxiliary spring systems, the SES Suspension Upgrade guarantees the best of both worlds.

Product Features:
  • Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Cushion Road Shocks
  • Simple And Easy To Install
See More

Daystar – Suspension Systems (Part No.KJ09179BK)

Suspension Systems

from

$51.99
Many aftermarket lift kits use the OEM coil isolator which causes the front coil springs to flex outward and rub against the suspension. This could eventually cause a catastrophic failure of your suspension. Daystar Coil Isolator replaces the OEM coil isolator and corrects this issue eliminating the premature wear of your suspension system.

Product Features:
  • Corrects Spring Geometry On Aftermarket Coils
  • Replaces The OEM Style Isolator With Durable Polyurethane Mount
  • Maintains Stability Control
  • FMVSS126 Compliant
  • Made In The USA
See More

Rancho – Suspension System (Part No.RS66124BR9-2)

Suspension System

from

$566.99
Get your 4-door Jeep® Wrangler JL Unlimited ready for a day on the trail with the Rancho® 2-in. to 3.5-in. Sport suspension system. This premium suspension system features Rancho RS9000®XL front and rear shocks that allow customized damping control.

Product Features:
  • ORDERING INFO –Box 2 of 2for master kitRS66124BR9, must order RS66124BR9-1 and RS66124BR9-2 for a complete kit
  • COMPATIBILITY — Designed for 4-door Jeep Wrangler JL Unlimited (excludes diesel, non-Rubicon models will net taller lift height versus Rubicon)
  • BUILT FOR THE TRAIL — Designed to fit up to 35-in. tires, get 2-in. to 3.5-in. of additional ground clearance needed for a day of rock crawling, trail riding and on-road driving (bumpers, sliders, winches, etc. affect lift height)
  • COMPLETE SOLUTION — Includes four Rancho RS9000®XL shocks, front and rear corner-specific progress rate coil springs, bump stops, front and rear extended sway bar end links, e-brake line relocation bracket and hardware
  • NINE LEVELS OF ADJUSTMENT — Rancho RS9000®XL shocks with nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility while Dynamic Rebound Spring (DRS) delivers additional control
  • SUPERIOR PERFORMANCE — Front and rear corner-specific progressive rate coil springs maintains level stance and ride while under heavy loads while brackets are fabricated from high-strength, low-alloy steel for long life
  • COMPLETE PERFORMANCE UPGRADE — Transform your suspension with Rancho geometry correction bracket (RS62118B) or combine with Rancho adjustable control arms (RS66164B, RS66165B and RS66157B, RS66158B), sold separately
  • EASY TO INSTALL — Bolt-on installation for an easy upgrade that complies with NHTSA FMVSS126 standards
  • NOTES — Compatible with Jeep factory electronic stability system, it allows the use of OE wheels and tires and is designed with 35-in. tires using 17-in. wheels with 4.5-in. backspacing (tire size varies between manufacturers)
See More

Suncore – Shock Kit (Part No.2-12S259130-001)

Shock Kit

from

$79.99
Shock Kit

Dorman – Trailing Arm (Part No.L2005219636DOR)

Trailing Arm

from

$45.76
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Suspension Trailing Arm is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:
  • Bushings included for a complete installation, saving time and labor (where applicable)
  • Direct replacement for a trouble-free installation
  • Steel, iron or aluminum construction ensures durability
  • Powder-coated or painted for long-lasting rust and corrosion resistance INSTALLATION NOTE: It is recommended by the manufacturer that trailing arms be replaced in pairs.
See More

Rancho – Adjustable Suspension Control Arm Kit (Part No.RS66165B)

Adjustable Suspension Control Arm Kit

from

$497.99
Designed to improve ride, Rancho® adjustable control arm kits are for a stock or lifted Jeep® Wrangler JL/Gladiator JT (up to 4.5-in.). Made of heavy tubing, they feature Rancho’s D2 maintenance-free bushings for reduced noise, vibration and harshness.

Product Features:
  • COMPATIBILITY — Designed for stock and lifted (up to 4.5-in.) Jeep Wrangler JL and Gladiator JT
  • MAINTENANCE-FREE BUSHINGS — Features Rancho’s D2 high-articulation, grease-free, self-centering bushings that have a PTFE liner in the internal bushing that serves as a lubricating agent for long-lasting, maintenance-free operation
  • IMPROVES RIDE — Reduces noise, vibration and harshness for improved ride quality
  • ADJUSTABLE — Allows adjustment of caster and pinion angles
  • ACCOMMODATES LARGER TIRES — Engineered to accommodate larger wheels and tires
  • RESISTS CORROSION — Durable black powder-coat finish resists rust and corrosion
  • ENGINEERED TO LAST — 1.25-In. OD diameter bar upper arms made of heavy-duty 0.188-in. DOM wall tubing with forged ends for long life
  • EASY TO INSTALL — Includes two preassembled control arms for easy installation
See More

Rancho – Suspension Control Arm (Part No.RS66158B)

Suspension Control Arm

from

$381.99
Designed to improve ride quality, Rancho® adjustable control arm kits are for a stock or lifted Jeep® Wrangler JK/JL (up to 4-in.). Made of heavy-duty tubing, they feature Rancho’s D2 maintenance-free bushings for reduced noise, vibration and harshness.

Product Features:
  • COMPATIBILITY — Designed for stock and lifted (up to 4-in.) Jeep Wrangler JK and JL
  • MAINTENANCE-FREE BUSHINGS — Features Rancho’s D2 high-articulation, grease-free, self-centering bushings that have a PTFE liner in the internal bushing that serves as a lubricating agent for long-lasting, maintenance-free operation
  • IMPROVES RIDE — Reduces noise, vibration and harshness for improved ride quality
  • ADJUSTABLE — Allows adjustment of pinion angle
  • ACCOMMODATES LARGER TIRES — Bent similar to factory design to accommodate larger wheels and tires
  • RESISTS CORROSION — Durable black powder-coat finish resists rust and corrosion
  • ENGINEERED TO LAST — 2-In. OD diameter bar lower arms made of heavy-duty 0.188-in. DOM wall tubing with forged ends for long life
  • EASY TO INSTALL — Includes two preassembled control arms for easy installation
See More

Rancho – Suspension Control Arm Bracket (Part No.RS62103)

Suspension Control Arm Bracket

from

$244.99
Designed to keep the control arms of your Jeep® Wrangler JK at factory angles, Rancho® rockGEAR® control arm geometry correction brackets deflect road harshness, reduce brake dive and allow for proper caster angle after adding an aftermarket lift kit.

Product Features:
  • COMPATIBILITY — Fits Jeep Wrangler JK Unlimited and Rubicon models with 2-in. to 4-in. lift kits that utilize the factory upper and lower control arms
  • MAINTAINS CASTER ANGLE — Keeps control arms at factory angles to deflect road harshness, reduce brake dive and allow for proper caster angle on lifted Jeep Wrangler JK models
  • EASY TO INSTALL — Bolt-on system for easy installation features four fixed adjustment locations for each height with option for additional caster
  • RESISTS CORROSION — Durable black E-coat finish resists rust and corrosion
  • ENGINEERED TO LAST — Made of high-strength, low-alloy steel for long life and dependability
  • ONE-PIECE SOLUTION — One-piece welded design eliminates need for adjustable control arms or cam bolts for caster correction
See More

Rancho – Suspension Control Arm Bracket (Part No.RS62118B)

Suspension Control Arm Bracket

from

$288.99
Designed to keep the control arms of your Jeep® Wrangler JL at factory angles, Rancho® rockGEAR® control arm geometry correction brackets deflect road harshness, reduce brake dive and allow for proper caster angle after adding an aftermarket lift kit.

Product Features:
  • COMPATIBILITY — Fits 2-door, 4-door Jeep Wrangler JL, non-Rubicon and Rubicon models with 2-in. to 4.5-in. lift kits that utilize the factory upper and lower control arms
  • MAINTAINS CASTER ANGLE — Keeps control arms at factory angles to deflect road harshness, reduce brake dive and allow for proper caster angle on lifted Jeep Wrangler JL models
  • EASY TO INSTALL — Bolt-on system for easy installation features three fixed adjustment locations for each height with option for additional caster
  • RESISTS CORROSION — Durable black E-coat finish resists rust and corrosion
  • ENGINEERED TO LAST — Made of high-strength, low-alloy steel for long life and dependability
  • ONE-PIECE SOLUTION — One-piece welded design eliminates need for adjustable control arms or cam bolts for caster correction
See More

Dorman – Alignment Caster / Pinion Angle Control Arm (Part No.528-060)

Alignment Caster / Pinion Angle Control Arm

from

$299.99
The pinion and caster angles on this replacement control arm can be adjusted to accommodate modified suspensions. It is precision-engineered and manufactured from durable materials for seamless installation and reliable performance on specified makes, models and years.

Product Features:
  • Versatile solution – the pinion and caster angles on this replacement control arm can be adjusted to accommodate modified suspensions
  • Ensure fit – precision-engineered for seamless installation on specified vehicle years, makes, models and configurations
  • Durable materials – this adjustable control arm is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Alignment Caster / Pinion Angle Control Arm (Part No.528-076)

Alignment Caster / Pinion Angle Control Arm

from

$233.99
The pinion and caster angles on this replacement control arm can be adjusted to accommodate modified suspensions. It is precision-engineered and manufactured from durable materials for seamless installation and reliable performance on specified makes, models and years.

Product Features:
  • Versatile solution – the pinion and caster angles on this replacement control arm can be adjusted to accommodate modified suspensions
  • Ensure fit – precision-engineered for seamless installation on specified vehicle years, makes, models and configurations
  • Durable materials – this adjustable control arm is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

2017 Jeep Wrangler Suspension Parts

You count on your 2017 Jeep Wrangler to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 120 Suspension Parts ranging in price from $6.29 to $1,689.99, you’re sure to find everything you need for your 2017 Jeep Wrangler.

Brands matter. If you want to shop a specific Suspension Parts brand, we stock 21 different brands like Rancho, Monroe, and Moog. 2017 Jeep Wrangler Suspension Parts start as low as $6.29!

One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 377 extensive product reviews on 2017 Jeep Wrangler Suspension Parts. Some of the top-rated Suspension Parts products we carry are OESpectrum Light Truck Shock Absorber with 3.0 stars and Reflex Monotube Shock Absorber with 2.7 stars.

Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2017 Jeep Wrangler below to get started!

Top-Rated Suspension Parts Brands For Your 2017 Jeep Wrangler

Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2017 Jeep Wrangler running right for years to come. In our inventory you’ll find brands like Rancho, Monroe, Moog, and even more.

Popular Dorman Suspension Parts

You’ll find popular Dorman brand products across Control Arms. All are waiting to get your 2017 Jeep Wrangler back on the road. Some of the top-rated Dorman products in these categories are:
Suspension Control Arm
from $78.99
(1)
Suspension Control Arm
Lower Control Arms

FAQs for 2017 Jeep Wrangler Suspension Parts

What are the most purchased Suspension Parts for the 2017 Jeep Wrangler?

Out of 120 Suspension Parts for the 2017 Jeep Wrangler, the most popular in our inventory are:
RS5000X Shock Absorber
from $91.99
(4)
RS5000X Shock Absorber
Rear Shock and Struts
RS5000X Shock Absorber
from $91.99
This product is not rated
RS5000X Shock Absorber
Front Shock and Struts
OESpectrum Light Truck Shock Absorber
from $76.99
(2)
OESpectrum Light Truck Shock Absorber
Rear Shock and Struts

What are the top-rated 2017 Jeep Wrangler Suspension Parts?

Top-rated Suspension Parts for your 2017 Jeep Wrangler based on customer reviews/ratings are:
OESpectrum Light Truck Shock Absorber
from $76.99
(3)
OESpectrum Light Truck Shock Absorber
“Above average shocks for slightly below average price. I have recently switched out the rear shocks on my 2004 MPV, and my 2010 F150, and also the fr”
Reflex Monotube Shock Absorber
from $87.99
(3)
Reflex Monotube Shock Absorber
“Replaced worn our mopar shocks on wifes 2016 RHD Jeep wrangler unlimited sport with these. Rides like new, easy install, and lifetime warranty.”
Coil Spring Set
from $98.99
(2)
Coil Spring Set
“Excellent product a little difficult to install”