2017 Jeep Wrangler Vehicle Hoods

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Lift supports are pressurized cylinders that are used to support hoods, hatches & rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

This direct-replacement hood prop rod clip matches the original equipment specifications to ensure reliable fit and function for this application. Made of quality materials, it is a cost-effective alternative to the dealer part.

This direct-replacement hood prop rod clip matches the original equipment specifications to ensure reliable fit and function for this application. Made of quality materials, it is a cost-effective alternative to the dealer part.

RT Offroad HOOD HINGE, RT34100. EXTERNAL SUPPLY>FDO>BACK ROOM-FDO>APPLICATION SPECIFIC from RT Offroad

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

New Standard Replacement Driver Or Passenger Side Hood Hinge

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Auveco products provide OE fit and function.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

These engine mounts work together with the stock skid plate / transmission cross member to mount the transmission & stock NP231J transfer case. The Gen III Hemi 5.7L factory truck oil pan & accessory drive system are recommended for this swap (these parts come on the donor engine when using the 2003-2008 5.7L Hemi truck engine). The 5.7L truck engine is an ideal engine choice for the Wrangler since it makes torque at a low RPM, right where it is needed for off-road use.

Flowmaster introduces our new Outlaw Extreme stainless steel cat-back exhaust system for the 2007-2018 Jeep Wrangler JK with the 3.6L/3.8L engines. This system uses an Outlaw series muffler for a deep powerful sound and increased performance. 3.0-inch mandrel bent 409 stainless steel tubing is used for maximum exhaust flow and durability. The system has a turndown style dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps to improve ground clearance and departure angle when you are driving in more extreme off-road situations. All of the necessary hardware is included and factory mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

This Flowmaster Force II Axle-back exhaust system for the 2018-2025 Jeep Wrangler JL with the 3.6L V6 and 2.0L turbo engines is perfect for the person looking for a moderate exterior and mild interior exhaust tone, with all of the performance benefits that you would expect from Flowmaster. This bolt-on Dual Out Rear emissions-legal system features a stainless steel 80 Series cross-flow muffler with dual 2.50-inch mandrel-bent tailpipes which are finished off with a pair of large 4.00-inch polished Flowmaster stainless steel tips for a modern look. The system includes all necessary parts, hardware and instructions for an easy installation. Covered by our Limited Warranty.

This Flowmaster Outlaw Cat-back exhaust system replaces the factory transverse muffler on 2018-2026 Jeep Wrangler Unlimited 4-door models with the 3.6L engine, including the Sahara 3.6L with Hybrid E-torque option. The system relocates the muffler into a position right behind the catalytic converter where it is tucked up into the frame and out of harm’s way when navigating rocky terrain. The system is constructed from 409S stainless steel, features a race-proven Outlaw series muffler for an aggressive exterior with a moderate interior sound level in the cab and the single 2.50-inch mandrel-bent stainless steel tailpipe is re-routed to run up and over the rear sway bar and exits up high at the rear bumper to provide maximum clearance for extreme crawling. The system is finished off with a polished 3.00-inch stainless steel tip. Note: Does Not fit 2-door models.

This hood stop support is designed to match the fit and function of the original support on specified vehicles, and is engineered for durability and reliable performance.

New CAPA Certified Premium Replacement Hood Panel, With One Washer Hole (Replaces Two Hole Version)

New Standard Replacement Hood Panel, With 2 Washer Nozzles, Without Power Bulge

New Economy Replacement Hood Panel, One Washer Hole, High Strength Steel

New Economy Replacement Hood Panel, With One Washer Hole (Replaces Two Hole Version)

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.