2017 Jeep Wrangler Bumpers

This pair of galvanized 3/4-inch D-shackles from Rugged Ridge is rated to 9,500 lbs. and provides everything you’ll need for recovering stuck Jeeps. Featuring a strong and sturdy construction, their natural high quality stainless steel finish gives them a

Product Features:

• Silver with Red Pin
• 9500Lb Pull Capacity
• Galvanized Steel
• Pair
• 3/4 in.

Looking to add some versatility and style to your Wrangler? No other bumper can give your Jeep this many looks. Featuring a modular design, these bumpers provide dozens of different appearances and styles so you can build the exact bumper of your choice!

Product Features:

• Textured Black
• Added Protection
• Modular Design
• Bolt-on
• Limited 5 Year Warranty

The stubby ends from Rugged Ridge feature a tough off road look while providing greater tire clearance for lifted Jeeps. The beefy black powder coated steel end caps extend out to the edge of the grille to offer protection, but leaves the wheel wells open

Product Features:

• Textured Black
• Added Protection
• Modular Design
• Bolt-on
• Limited 5 Year Warranty

3.5-Inch Bull Bar; B

New Standard Replacement Driver Or Passenger Side Front Bumper Guard

Product Features:

• Made Of Rubber, Poly(Acrylic Acid Ester)
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Premium Replacement Front Bumper Cover Reinforcement Bar

Product Features:

• Made Of High Strength Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Are you looking for protection or Rugged Ridge D rings? This pair of European styled XHD bumper tow point covers feature a hard-wearing injection molded plastic design that matches the factory one for an overall integrated look. For use with 11540.10 and

Product Features:

• Textured Black
• European Style
• Easily Removable
• Limited 5 Year Warranty

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

Spartan Front Bumper

Spartacus Front Bump

Westins WJ2 Bumper is constructed with high-strength 3/16-inch plate steel. Our WJ2 Bumper improves ground and tire clearance while offering corner light mount points and rock light mount points, plus 2 side and 2 front off-road jack points. Your winch fits down inside the bumper to allow maximum air flow to your vehicles radiator and the WJ2 Bumper includes pre-drilled holes to allow installation of a winch while the bumper is already installed on your Jeep – most other brands wont! Features recovery hooks with a recovery shackle mounting point to allow easy tow strap attachment. Bolt-on installation so no drilling is required. Recommended optional skid plate sold separately. Includes bumper, mounting hardware and install instructions.

Product Features:

• Rock Light Mount Points
• Bolt On Installation; No Drill Required
• Integrated Recovery Shackle Mount Points
• Includes Bumper; Mounting Hardware And Install Instructions
• Designed To Work With Factory Or Westin Hitches
• Auxiliary Light Mount Points
• 2 Off-Road Jack Points
• 0.1875 in. Plate Steel Construction

Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included). For winch mounting plate

Product Features:

• Gloss Black
• With Raiser and Winch Cut Out
• Welded End Caps
• Limited 5 Year Warranty

No other bumper can give your Jeep this many looks! The most versatile bumper system ever created, the XHD Modular Bumper System provides dozens of different looks and styles so you can customize your bumper the way you like it. This black powder-coated c

Product Features:

• Textured Black
• Aluminum
• Modular Design
• Winch Plate

Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included). For winch mounting plate

Product Features:

• Textured Black
• With Raiser and Winch Cut Out
• Welded End Caps
• Limited 5 Year Warranty

What impression does your rear bumper leave? Tough looks? Heavy-duty construction? The Rugged Ridge XHD Rear Bumper System was designed to be tough enough to tackle anything you do! These bumpers feature easy installation, amazing looks and two reinforced

Product Features:

• Textured Black

All Rugged Ridge bumpers feature smooth ground welds for an unbelievable look and further rust protection. No other tubular bumper manufacturer goes to the expense of smooth grinding their welds. This exclusive smooth grind process virtually eliminates sm

Product Features:

• Gloss Black
• Allows Oversized Spare Tire
• Welded End Caps
• Limited 5 Year Warranty

Westins WJ2 Rear Bumper is constructed with 3/16-inch plate steel and features 2 off-road jack mount points. This clean, stylish bumper is designed to work with factory or Westin hitches. Our WJ2 Rear Bumper includes integrated recovery shackle mount points as well as additional mount points for Auxiliary Lights and Rock Lights. Bolt on installation so no drilling is required. Includes bumper, mounting hardware and install instructions.

Product Features:

• 3/16-Inch Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points
• Rock Light Mount Points
• 2 Off-Road Jack Points
• No Drilling Required – Bolt On Installation
• Includes Bumper; Mounting Hardware And Install Instructions

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Plastic
• OE Style
• Direct Fit
• Left Side
• Limited 5 Year Warranty

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1997-2006 Wrangler, 2004-2006 Wrangler Unlimited, Bumper Extension Screw, Front or Rear (4 Required Per Extension)

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:

• Plastic
• OE Style
• Direct Fit
• Right Side
• Limited 5 Year Warranty

New Standard Replacement Front Bumper To Body Filler Panel, Plastic [Upper Cover]

Product Features:

• Plastic [Upper Cover], Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle