2017 Infiniti Q60 Exhaust Parts
Find Your Specific 2017 Infiniti Q60 Exhaust Parts
Below you will find various in-demand Infiniti Exhaust Parts, components and accessories for your 2017 Q60. Advance Auto Parts has popular Q60 parts like Exhaust Temperature (EGT) Products, Exhaust System Kits, Exhaust Pipes and more. You’ll also find aftermarket and OEM Exhaust Parts for other Q60 model years including
2014,
2015,
2018 and more. Select a category of 2017 Infiniti Q60 Exhaust Parts below and start saving instantly.
Popular 2017 Infiniti Q60 Exhaust Parts Categories
Essential Exhaust Parts for 2017 Infiniti Q60s
Dorman – EXHAUST HARDWARE KIT (Part No.675-240)
from
$21.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.16820)
from
$1470.00
The MagnaFlow Street Series Cat-Back Performance Exhaust System 16820 brings out the personality of your 3.7L 2008-2015 INFINITI with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this INFINITI exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other INFINITI’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16820 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16820 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.
Product Features:
See More
Product Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
aFe POWER – Takeda Axel Back Exhaust System: Black Tip, 304 Stainless Steel, Gain up to 4 HP (Part No.49-36133NM-B)
from
$765.99
Takeda exhaust systems deliver power, sound, and style. Constructed from mandrel-bent stainless steel tubing for corrosion resistance and long-lasting good looks, these systems are guaranteed to exceed your expectations. Direct bolt-on. No modifications required. 100% TIG-welded for race proven strength and durability.
Product Features:
See More
Product Features:
- Delivering power, sound, and style
- Muffler-Free System Provides Aggressive Sound
- Mandrel-Bent Tubing for Improved Flow
- OE-style flanges and Stainless Clamps for Improved Sealing Surface
aFe POWER – Takeda Axel Back Exhaust System: Carbon Fiber Tip, 304 Stainless Steel, Gain up to 4 HP (Part No.49-36133NM-C)
from
$765.99
Takeda exhaust systems deliver power, sound, and style. Constructed from mandrel-bent stainless steel tubing for corrosion resistance and long-lasting good looks, these systems are guaranteed to exceed your expectations. Direct bolt-on. No modifications required. 100% TIG-welded for race proven strength and durability.
Product Features:
See More
Product Features:
- Delivering power, sound, and style
- Muffler-Free System Provides Aggressive Sound
- Mandrel-Bent Tubing for Improved Flow
- OE-style flanges and Stainless Clamps for Improved Sealing Surface
aFe POWER – Takeda Axel Back Exhaust System: Blue Flame Tip, 304 Stainless Steel, Gain up to 4 HP (Part No.49-36133NM-L)
from
$765.99
Performance Gains:_x000d_In-house dyno testing produced gains of up to +4 HP and +7 lbs. x ft. torque.
Product Features:
See More
Product Features:
- Up to +4 HP and +7 lbs. x ft. TQ
- Dual 4-1/2″ rear exit, blue flame stainless steel tips give a unique, custom appearance
- 100% TIG-Welded for strength and durability
- Modular design utilizes stock mounting locations
aFe POWER – Takeda Cat Back Exhaust System: Polished Tip, 304 Stainless Steel, Gain up to 18 HP (Part No.49-36134NM-P)
from
$1823.99
Performance Gains:_x000d_In testing, this cat-back exhaust system produced gains up to +18 HP and +19 lbs. x ft. of TQ, as measured on our in-house dyno.
Product Features:
See More
Product Features:
- Dual 4-1/2″ rear exit polished stainless steel tips give a unique, custom appearance
- 100% TIG-Welded for strength and durability
- Modular design utilizes stock mounting locations with no cutting or modifications required for a hassle-free installation
Dorman – Double Ended Stud – M10-1.50 x 27mm and M10-1.50 x 12mm (Part No.29224)
from
$6.49
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Exhaust Gas Temperature (EGT) Sensor (Part No.EGA2628)
from
$433.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
aFe POWER – Takeda Y-Pipe (Part No.49-36131)
from
$1242.99
Add dyno-proven performance and an aggressive exhaust sound by replacing the constrictive factory mufflers and tubing with this Takeda 2-1/2″ open y-pipe and mid-pipe. This modular Takeda system increased exhaust velocity for performance gains of up to +6 horsepower and +5 lbs. x ft. torque as measured on our in-house dyno. Mandrel bent, 304 stainless steel tubing and resonator delete pipes greatly increases flow and sound. TIG-welded for durability and longevity, this system is designed to fit factory mounting locations for an easy install. No cutting or modifying required.
Product Features:
See More
Product Features:
- Outflows and Outlasts Constrictive Factory Y-Pipe and Mid-Pipe
- Incl. Resonator Delete Pipes
- Modular Designed For Easy Installation
- No Cutting Required
Upgrade your 2017 Infiniti Q60 with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 2017 Infiniti Q60, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Infiniti or enhancing its overall performance, Exhaust Parts are key to keeping your Q60 functioning at its best. At Advance Auto Parts, we offer a wide selection of 8 Exhaust Parts for the 2017 Infiniti Q60, designed to meet your needs without breaking the bank.
From
Exhaust Temperature (EGT) Product
replacements to
Exhaust System Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2017 Infiniti Q60 at great prices.
Our Exhaust Parts inventory for this model
ranges from just $6.49 to $1,823.99, with
an average price of $728.37.
Our 8 Exhaust Parts in stock come from 3 trusted brands, so you’re sure to find the right part for your 2017 Infiniti Q60 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2017 Infiniti Q60 is always ready to roll. We’re committed to providing you with everything you need to keep your Q60 in top shape, all in one place.
Start shopping confidently below for your 2017 Infiniti Q60!
Best-Selling Exhaust Temperature (EGT) Products for 2017 Infiniti Q60s
Enhance the driving experience in your Infiniti with 1 quality Exhaust Temperature (EGT) Product components, starting at $433.99.
Carquest Premium – Exhaust Gas Temperature (EGT) Sensor (Part No.EGA2628)
from
$433.99
The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Application matched components ensures system operation in like new condition.
Most Popular 2017 Infiniti Q60 Exhaust System Kits
Customize your Infiniti with 5 Exhaust System Kits products
like Exhaust Manifold Hardware Kits and
Exhaust System Kits, all
priced under $1,823.99.
aFe POWER – Takeda Cat Back Exhaust System: Polished Tip, 304 Stainless Steel, Gain up to 18 HP (Part No.49-36134NM-P)
from
$1823.99
Performance Gains:_x000d_In testing, this cat-back exhaust system produced gains up to +18 HP and +19 lbs. x ft. of TQ, as measured on our in-house dyno.
Product Features:
See More
Product Features:
- Dual 4-1/2″ rear exit polished stainless steel tips give a unique, custom appearance
- 100% TIG-Welded for strength and durability
- Modular design utilizes stock mounting locations with no cutting or modifications required for a hassle-free installation
aFe POWER – Takeda Axel Back Exhaust System: Carbon Fiber Tip, 304 Stainless Steel, Gain up to 4 HP (Part No.49-36133NM-C)
from
$765.99
Takeda exhaust systems deliver power, sound, and style. Constructed from mandrel-bent stainless steel tubing for corrosion resistance and long-lasting good looks, these systems are guaranteed to exceed your expectations. Direct bolt-on. No modifications required. 100% TIG-welded for race proven strength and durability.
Product Features:
See More
Product Features:
- Delivering power, sound, and style
- Muffler-Free System Provides Aggressive Sound
- Mandrel-Bent Tubing for Improved Flow
- OE-style flanges and Stainless Clamps for Improved Sealing Surface
aFe POWER – Takeda Axel Back Exhaust System: Blue Flame Tip, 304 Stainless Steel, Gain up to 4 HP (Part No.49-36133NM-L)
from
$765.99
Performance Gains:_x000d_In-house dyno testing produced gains of up to +4 HP and +7 lbs. x ft. torque.
Product Features:
See More
Product Features:
- Up to +4 HP and +7 lbs. x ft. TQ
- Dual 4-1/2″ rear exit, blue flame stainless steel tips give a unique, custom appearance
- 100% TIG-Welded for strength and durability
- Modular design utilizes stock mounting locations
aFe POWER – Takeda Axel Back Exhaust System: Black Tip, 304 Stainless Steel, Gain up to 4 HP (Part No.49-36133NM-B)
from
$765.99
Takeda exhaust systems deliver power, sound, and style. Constructed from mandrel-bent stainless steel tubing for corrosion resistance and long-lasting good looks, these systems are guaranteed to exceed your expectations. Direct bolt-on. No modifications required. 100% TIG-welded for race proven strength and durability.
Product Features:
See More
Product Features:
- Delivering power, sound, and style
- Muffler-Free System Provides Aggressive Sound
- Mandrel-Bent Tubing for Improved Flow
- OE-style flanges and Stainless Clamps for Improved Sealing Surface
Dorman – EXHAUST HARDWARE KIT (Part No.675-240)
from
$21.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Top Picks for 2017 Infiniti Q60 Exhaust Pipes
Upgrade Infiniti Q60s with top-quality Exhaust Pipes parts, including 1 OEM and aftermarket selections for your 2017 model.
aFe POWER – Takeda Y-Pipe (Part No.49-36131)
from
$1242.99
Add dyno-proven performance and an aggressive exhaust sound by replacing the constrictive factory mufflers and tubing with this Takeda 2-1/2″ open y-pipe and mid-pipe. This modular Takeda system increased exhaust velocity for performance gains of up to +6 horsepower and +5 lbs. x ft. torque as measured on our in-house dyno. Mandrel bent, 304 stainless steel tubing and resonator delete pipes greatly increases flow and sound. TIG-welded for durability and longevity, this system is designed to fit factory mounting locations for an easy install. No cutting or modifying required.
Product Features:
See More
Product Features:
- Outflows and Outlasts Constrictive Factory Y-Pipe and Mid-Pipe
- Incl. Resonator Delete Pipes
- Modular Designed For Easy Installation
- No Cutting Required
In-Demand Exhaust Hangers for 2017 Infiniti Q60s
Select from 1 premium Exhaust Hangers parts for your 2017 Infiniti Q60.
Dorman – Double Ended Stud – M10-1.50 x 27mm and M10-1.50 x 12mm (Part No.29224)
from
$6.49
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
FAQs for 2017 Infiniti Q60 Exhaust Parts
Which Exhaust Parts are best-sellers for 2017 Infiniti Q60s?
Out of 8 Exhaust Parts that fit 2017 Infiniti Q60s, the following parts are the top sellers:
- Takeda Y-Pipe (12265914) – $1,242.99
- Takeda Axel Back Exhaust System: Black Tip, 304 Stainless Steel, Gain up to 4 HP (12266269) – $765.99
- Exhaust Gas Temperature (EGT) Sensor (50046038) – $433.99
What’s the price range for 2017 Infiniti Q60 Exhaust Parts?
Exhaust Part prices for the 2017 Infiniti Q60 start at $6.49 and go up to $1,823.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 2017 Infiniti Q60?
The average price for Exhaust Parts for the 2017 Infiniti Q60 is $728.37. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Infiniti Q60 model years?
What are the cheapest Exhaust Parts for my 2017 Infiniti Q60?
The cheapest 2017 Infiniti Q60 Exhaust Parts we carry in stock are:
- Double Ended Stud – M10-1.50 x 27mm and M10-1.50 x 12mm (9111107) – $6.49
- EXHAUST HARDWARE KIT (50167135) – $21.49
- Exhaust Gas Temperature (EGT) Sensor (50046038) – $433.99
- Takeda Axel Back Exhaust System: Carbon Fiber Tip, 304 Stainless Steel, Gain up to 4 HP (12265798) – $765.99
- Takeda Axel Back Exhaust System: Blue Flame Tip, 304 Stainless Steel, Gain up to 4 HP (12265827) – $765.99
What are the top-rated Exhaust Parts that fit the 2017 Infiniti Q60?
Out of 4 reviews by customers, our 2017 Infiniti Q60 Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2017 Infiniti Q60 and their top-rated products:
- Exhaust Hangers
- Double Ended Stud – M10-1.50 x 27mm and M10-1.50 x 12mm (9111107) – $6.49
What types of Exhaust Parts do you sell for my 2017 Infiniti Q60?
As of 11/2/25, these are some of the most in-demand types of Exhaust Parts for a 2017 Infiniti Q60:
Can I get help with 2017 Infiniti Q60 Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Infiniti Exhaust Parts and more.
What is your return policy for Infiniti Q60 Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Infiniti Q60 Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
