from

$42.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$401.99

High quality OE replacement part with all components needed to complete the job

Product Features:

All compressors go through sophisticated testing and leak test processes
Includes specific electrical connector to eliminate splicing
For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
Validated for fit, form, and function to OE standards

from

$28.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$6.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$34.99

This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$11.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$117.30

Koyo engineers design the A/C Condensers to meet the demanding OE specifications, offering a true plug and play installation: No drilling, cutting, relocating, or stretching to get our radiators to fit properly.

Product Features:

Japanese Engineered, OE Equivalent Quality
Meet or exceed OEM specifications.
Utilizes the factory style mounts, connectors and fittings.
Compatible with R12 and R134a refrigerant.
Applicable gaskets and O-rings supplied with each part.

from

$16.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$8.49

The Original Equipment Thermostat Housing Cover is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$109.34

Blower Motor

from

$44.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$123.99

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
All units have new seals, O-rings, gaskets and clutch bearings
Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

from

$17.79

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$11.49

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$28.99

New Standard Replacement Upper Radiator Support Cover, Sight Shield, Sedan And Hatchback Models

Product Features:

Sight Shield, Sedan And Hatchback Models, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$189.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$90.05

A/C Pressure Switch

from

$7.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Unsurpassed quality you can trust
Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function

from

$135.99

Carquest Premium offers a complete line of automotive heaters covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heaters that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Premium parts you can rely on; The finest quality at a great price. The finest quality at the most competitive price /or/ Premium quality at the most competitive price.
CARQUEST heaters are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Designed to keep your A/C system in top shape and built to provide long-lasting service
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
CARQUEST offers a complete line of automotive heaters covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$71.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$49.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$118.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$21.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$58.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$37.49

Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
Restores performance – fixes a fan that’s only operating on one speed or not working at all
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$5.36

Water Pump Gasket

from

$39.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$17.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.