2017 Ford Taurus Transmission Parts
Find Your Specific 2017 Ford Taurus Transmission Parts
Below you will find various in-demand Ford Transmission Parts, components and accessories for your 2017 Taurus. Advance Auto Parts has popular Taurus parts like Automatic Transmission Parts, Transmission Cooler and Parts, Transmission Mounts and more. You’ll also find aftermarket and OEM Transmission Parts for other Taurus model years including
2010,
2011,
2012,
2013,
2014,
2015,
2016,
2018,
2019 and more. Select a category of 2017 Ford Taurus Transmission Parts below and start saving instantly.
Popular 2017 Ford Taurus Transmission Parts Categories
Essential Transmission Parts for 2017 Ford Tauruses
Dorman – Transmission Control (Part No.J25031225217DOR)
from
$382.24
Dorman’s OE FIX repair solution addresses a common failure mode found in the original Transmission Control Module (TEHCM) design. The original TEHCM design uses a material called Kapton for its pressure switch film; that is not durable enough to maintain its proper form when the TEHCM becomes contaminated. All Dorman’s TEHCMs are completely remanufactured using a material called Polyether Ether Ketone, also known as PEEK. PEEK is a form of plastic that is resistant to thermal decomposition and remains in its original form with it comes in contact with debris. Additionally, our TEHCM units include 100% replacement of gaskets, grommets, and seals for a complete repair.
Product Features:
See More
Product Features:
- Software Transfer Tool included with every GM TEHCM unit, eliminating a costly trip to the Dealer
- Direct replacement restores the ability to shift the vehicle in and out of gear without hesitation or rough shift
- Fully remanufactured and vehicle simulator tested for durability and quality assurance
- Includes upgraded materials
FAG US – SHAFT SEAL (Part No.SS60801)
from
$13.99
SHAFT SEAL
Carquest Premium – Carquest Premium Automatic Transmission Pressure Control Solenoid (Part No.TCC1496)
from
$41.49
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Product Features:
See More
Product Features:
- An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by
- Precision-wound coated copper windings increase product durability and life cycle.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure product reliability, every time.
Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBC4931)
from
$26.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Felpro – Transmission Oil Pan Gasket 0 Bolt Hole One Piece Gasket (Part No.TOS 18767)
from
$18.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Dorman – Transmission Output Speed Sensor (Part No.917-605)
from
$59.99
This transaxle output speed sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this transaxle output speed sensor is designed to match the fit and function of the original sensor on specified vehicles.
- Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction.
- Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Multi Purpose Seal (Part No.710544)
from
$3.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Dorman – Transmission Input Speed Sensor (Part No.917-665)
from
$26.99
This transaxle input speed sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this transaxle input speed sensor is designed to match the fit and function of the original sensor on specified vehicles.
- Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction.
- Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-165)
from
$115.99
This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
- Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
- Durable construction – made of quality materials for reliable performance and long service life
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Automatic Transmission Speed Sensor (Part No.SNA1063)
from
$39.99
CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali
Product Features:
See More
Product Features:
- Lifecycle tested to meet or exceed OE specifications
- Direct OE replacement
- High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
- Global coverage for import and/or domestic applications.
Carquest Premium – Automatic Transmission Gear Position Sensor (Part No.CSC2053)
from
$106.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2057)
from
$52.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.
Product Features:
See More
Product Features:
- High grade materials that are equal to or better than OE provide durability and long service life
- All ABS sensors are tested for proper fit, form, and function
- Wire diameter and sheathing same or larger than OE to ensure product quality
- Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
- Includes all necessary brackets and hardware
Carquest Premium – Air Bag Side Impact Sensor Connector (Part No.PTC2893)
from
$36.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Dorman – Remanufactured Transmission Electro-Hydraulic Control Module (Part No.609-035)
from
$322.99
This transmission control module has been fully tested and validated to match the function and performance of the original TCM on specified vehicle applications.
Product Features:
See More
Product Features:
- Direct replacement – this transmission control module matches the function and performance of the stock TCM on specified years, makes and models.
- Ideal solution – this transmission control module is a reliable replacement for an original part that has failed due to corrosion or electrical failure.
- Thoroughly tested – this TCM has undergone full vehicle simulator testing to confirm full functionality for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.3390)
from
$36.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 13-18; LINCOLN 13-16;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2013-2018
- Weight approx: 2 Lbs
- PART GROUP: 3373, 3374, 3390
Moveras – AX4S – Automatic Transmission (Part No.M00418)
from
$1868.99
While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.
Product Features:
See More
Product Features:
- Product might not be available in all states due to local laws.
Dorman – Help – Transmission Shift Cable Repair (Part No.14908)
from
$17.99
When the transmission linkage clips break on many Ford, Lincoln and Mercury vehicles, you usually have to replace the entire shifter cable assembly. This Dorman OE FIX clip allows direct replacement of only the failed original clip, saving money.
Product Features:
See More
Product Features:
- Smart fix – this direct replacement shift linkage clip saves time and money by directly replacing the failure-prone clip on many Ford, Lincoln and Mercury vehicles.
- Effective alternative – allows you to restore shifter mechanism operation without replacing the entire shifter cable assembly
- Application specific – made for certain Ford, Lincoln and Mercury vehicles
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
National – Multi Purpose Seal (Part No.710583)
from
$14.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Anchor – Transmission Mount: Left, 1 Piece (Part No.2717)
from
$41.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 90-03; LINCOLN 88-02; MERCURY 88-99;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1988-2003
- Weight approx: 5 Lbs
- HYDRAULIC
- BRACKET BOLTS: 10 MM
- PART 2974 USES 8 MM BOLTS
Anchor – Transmission Mount: Left, 1 Piece (Part No.2687)
from
$8.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 86-89; MERCURY 86-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1986-1989
- Weight approx: 3 Lbs
National – Shaft Repair Sleeve (Part No.99187)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
FAG US – SHAFT SEAL (Part No.SS61301)
from
$15.79
SHAFT SEAL
National – Multi Purpose Seal (Part No.710561)
from
$12.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Dorman – Help – Transmission Oil Dipstick: Direct Replacement, Stainless Steel (Part No.921-259)
from
$19.99
This automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles.
- Restores functionality – reliable replacement for an original dipstick that has bent or broken due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – AT Oil Pan (Part No.J5030685654DOR)
from
$56.91
AT Oil Pan
Dorman – AT Oil Pan (Part No.J5030685664DOR)
from
$105.85
AT Oil Pan
Dorman – Transmission Oil Pan (Part No.265-918)
from
$148.99
This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.
Product Features:
See More
Product Features:
- Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement.
- Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance
- Cost-effective solution – offers original equipment performance at competitive price
- Quality tested – this part has undergone try-on testing to ensure a quality fit
Upgrade your 2017 Ford Taurus with Top-Quality Transmission Parts
When it comes to maintaining or upgrading your 2017 Ford Taurus, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Transmission Parts are key to keeping your Taurus functioning at its best. At Advance Auto Parts, we offer a wide selection of 46 Transmission Parts for the 2017 Ford Taurus, designed to meet your needs without breaking the bank.
From
Automatic Transmission Part
replacements to
Transmission Cooler and Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2017 Ford Taurus at great prices.
Our Transmission Parts inventory for this model
ranges from just $3.79 to $2,705.99, with
an average price of $205.55.
Our 46 Transmission Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 2017 Ford Taurus without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2017 Ford Taurus, we stock popular OEM and aftermarket Transmission Parts from top names
like National, and more.
National Transmission Parts
start at just $10.79 and boast an impressive 4.3 stars average rating from customers.
With 55 customer reviews and counting, our 2017 Ford Taurus Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2017 Ford Taurus is always ready to roll. We’re committed to providing you with everything you need to keep your Taurus in top shape, all in one place.
Start shopping confidently below for your 2017 Ford Taurus!
Best-Selling Automatic Transmission Parts for 2017 Ford Tauruses
Enhance the driving experience in your Ford with 10 quality Automatic Transmission Part components, starting at $17.99.
Dorman – Help – Transmission Shift Cable Repair (Part No.14908)
from
$17.99
When the transmission linkage clips break on many Ford, Lincoln and Mercury vehicles, you usually have to replace the entire shifter cable assembly. This Dorman OE FIX clip allows direct replacement of only the failed original clip, saving money.
Product Features:
See More
Product Features:
- Smart fix – this direct replacement shift linkage clip saves time and money by directly replacing the failure-prone clip on many Ford, Lincoln and Mercury vehicles.
- Effective alternative – allows you to restore shifter mechanism operation without replacing the entire shifter cable assembly
- Application specific – made for certain Ford, Lincoln and Mercury vehicles
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Shift Pro by ETE – 6F50 Automatic Transmission Assembly (Part No.T161634)
from
$2705.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.
Product Features:
See More
Product Features:
- Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
- All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
- During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
- All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
- Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
- No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
- Product might not be available in all states due to local laws.
Shift Pro by ETE – 6F50 Automatic Transmission Assembly (Part No.T161636)
from
$2705.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.
Product Features:
See More
Product Features:
- Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
- All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
- During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
- All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
- Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
- No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
- Product might not be available in all states due to local laws.
Shift Pro by ETE – 6F50 Automatic Transmission Assembly (Part No.T161627)
from
$2705.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.
Product Features:
See More
Product Features:
- Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
- All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
- During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
- All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
- Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
- No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
- Product might not be available in all states due to local laws.
Shift Pro by ETE – 6F50 Automatic Transmission Assembly (Part No.T161625)
from
$2705.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.
Product Features:
See More
Product Features:
- Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
- All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
- During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
- All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
- Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
- No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
- Product might not be available in all states due to local laws.
Shift Pro by ETE – 6F50 Automatic Transmission Assembly (Part No.T161635)
from
$2705.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.
Product Features:
See More
Product Features:
- Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
- All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
- During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
- All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
- Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
- No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
- Product might not be available in all states due to local laws.
Dorman – Transmission Control (Part No.J25031225217DOR)
from
$382.24
Dorman’s OE FIX repair solution addresses a common failure mode found in the original Transmission Control Module (TEHCM) design. The original TEHCM design uses a material called Kapton for its pressure switch film; that is not durable enough to maintain its proper form when the TEHCM becomes contaminated. All Dorman’s TEHCMs are completely remanufactured using a material called Polyether Ether Ketone, also known as PEEK. PEEK is a form of plastic that is resistant to thermal decomposition and remains in its original form with it comes in contact with debris. Additionally, our TEHCM units include 100% replacement of gaskets, grommets, and seals for a complete repair.
Product Features:
See More
Product Features:
- Software Transfer Tool included with every GM TEHCM unit, eliminating a costly trip to the Dealer
- Direct replacement restores the ability to shift the vehicle in and out of gear without hesitation or rough shift
- Fully remanufactured and vehicle simulator tested for durability and quality assurance
- Includes upgraded materials
Dorman – Remanufactured Transmission Electro-Hydraulic Control Module (Part No.609-035)
from
$322.99
This transmission control module has been fully tested and validated to match the function and performance of the original TCM on specified vehicle applications.
Product Features:
See More
Product Features:
- Direct replacement – this transmission control module matches the function and performance of the stock TCM on specified years, makes and models.
- Ideal solution – this transmission control module is a reliable replacement for an original part that has failed due to corrosion or electrical failure.
- Thoroughly tested – this TCM has undergone full vehicle simulator testing to confirm full functionality for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Automatic Transmission Control Solenoid (Part No.TCC1011)
from
$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Help – Transmission Oil Dipstick: Direct Replacement, Stainless Steel (Part No.921-259)
from
$19.99
This automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this automatic transmission dipstick is designed to match the fit and function of the original dipstick on specified vehicles.
- Restores functionality – reliable replacement for an original dipstick that has bent or broken due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Most Popular 2017 Ford Taurus Transmission Cooler and Parts
Customize your Ford with 1 Transmission Cooler and Parts products
like Transmission Oil Cooler Lines, all
priced under $115.99.
Dorman – Transmission Oil Cooler Line: Exact Fit, Metal (Part No.624-165)
from
$115.99
This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
- Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
- Durable construction – made of quality materials for reliable performance and long service life
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Top Picks for 2017 Ford Taurus Transmission Mounts
Upgrade Ford Tauruses with top-quality Transmission Mounts parts, including 8 OEM and aftermarket selections for your 2017 model.
Anchor – Transmission Mount: Left, 1 Piece (Part No.3205)
from
$70.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 08-19; LINCOLN 09-19; MERCURY 08-09;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2008-2019
- Weight approx: 6 Lbs
Anchor – Transmission Mount: Left, 1 Piece (Part No.3428)
from
$110.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 10-19; LINCOLN 10-19;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2010-2019
- Weight approx: 6 Lbs
Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.3218)
from
$44.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 10-19; LINCOLN 10-19;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2010-2019
- Weight approx: 1 Lbs
Anchor – Torque Strut Motor Mount: Front, 1 Piece (Part No.3219)
from
$79.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 10-19; LINCOLN 10-16;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2010-2019
- Weight approx: 1 Lbs
Anchor – Transmission Mount: Left, 1 Piece (Part No.3374)
from
$87.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 13-18; LINCOLN 13-16;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2013-2018
- Weight approx: 5 Lbs
- PART GROUP: 3373, 3374, 3390
Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.3388)
from
$59.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 13-19; LINCOLN 13-18;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2013-2019
- Weight approx: 3 Lbs
DEA – Transmission Mount (Part No.J60002755989DEA)
from
$100.98
Transmission Mount
Anchor – Torque Strut Motor Mount: Rear, 1 Piece (Part No.3390)
from
$36.49
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to FORD 13-18; LINCOLN 13-16;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2013-2018
- Weight approx: 2 Lbs
- PART GROUP: 3373, 3374, 3390
In-Demand Transmission Seals for 2017 Ford Tauruses
Select from 11 premium Transmission Seals parts for your 2017 Ford Taurus, with prices ranging from $3.79 to $41.99.
National – Multi Purpose Seal (Part No.710546)
from
$10.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99187)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Multi Purpose Seal (Part No.710583)
from
$14.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.710544)
from
$3.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Auto Transmission Output Shaft Seal (Part No.S-710583)
Motorcraft – Wheel Seal (Part No.K8010674110MTR)
from
$33.86
Wheel Seal
Autopart International Inc – AT Output Shaft Seal (Part No.J25571990981API)
from
$17.81
AT Output Shaft Seal
SKF – AT Output Shaft Seal (Part No.J2557787148SKF)
from
$15.00
AT Output Shaft Seal
SKF – AT Output Shaft Seal (Part No.J2557787147SKF)
from
$14.89
AT Output Shaft Seal
FAG US – SHAFT SEAL (Part No.HC6181)
from
$14.29
SHAFT SEAL
FAG US – SHAFT SEAL (Part No.SS60801)
from
$13.99
SHAFT SEAL
Most Sold 2017 Ford Taurus Automatic Transmission Pan and Gaskets
Explore our best-selling Ford parts for the 2017 Taurus among 2 OEM and aftermarket options starting from $18.99.
Felpro – Transmission Oil Pan Gasket 0 Bolt Hole One Piece Gasket (Part No.TOS 18767)
from
$18.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Dorman – Transmission Oil Pan (Part No.265-918)
from
$148.99
This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.
Product Features:
See More
Product Features:
- Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement.
- Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance
- Cost-effective solution – offers original equipment performance at competitive price
- Quality tested – this part has undergone try-on testing to ensure a quality fit
Top-Rated Transmission Parts Brands For Your 2017 Ford Taurus
Shop for the best-rated brands offering Transmission Parts and other products for your 2017 Ford Tauruses. Below you’ll find some of our best rated Transmission Parts from National, and more. Transmission Parts from these brands that fit a 2017 Taurus start at just $10.79 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular National 2017 Ford Taurus Transmission Parts
When it comes to maintaining or upgrading your 2017 Ford Taurus, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 2017 Ford Taurus. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.79, with an average price of just $22.42. Plus, with over 4 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$10.79
(2)
Multi Purpose Seal
“Only complaint the website showed the part available for pick up at a store near my residence however when I got there they did not have the part in s”
from
$41.99
(1)
Shaft Repair Sleeve
“Fixed my Ford F-150 4.2. Fit well and installation tool seated the sleeve exactly where it needed to be. Super easy to use and covered the grooved s”
FAQs for 2017 Ford Taurus Transmission Parts
Which Transmission Parts are best-sellers for 2017 Ford Tauruses?
Out of 46 Transmission Parts that fit 2017 Ford Tauruses, the following parts are the top sellers:
- Transmission Shift Cable Repair (11880633) – $17.99
- Transmission Mount: Left, 1 Piece (10460994) – $70.99
- Multi Purpose Seal (99992972) – $12.79
What’s the price range for 2017 Ford Taurus Transmission Parts?
Transmission Part prices for the 2017 Ford Taurus start at $3.79 and go up to $2,705.99 for the most premium parts.
What’s the average price of a Transmission Part for a 2017 Ford Taurus?
The average price for Transmission Parts for the 2017 Ford Taurus is $205.55. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Transmission Parts for other Ford Taurus model years?
What are the cheapest Transmission Parts for my 2017 Ford Taurus?
The cheapest 2017 Ford Taurus Transmission Parts we carry in stock are:
- Multi Purpose Seal (99997206) – $3.79
- Auto Transmission Output Shaft Seal (11468535) – $8.79
- Multi Purpose Seal (20441890) – $10.79
- Multi Purpose Seal (99992972) – $12.79
- SHAFT SEAL (50206277) – $13.99
What types of Transmission Parts do you sell for my 2017 Ford Taurus?
As of 4/10/25, these are some of the most in-demand types of Transmission Parts for a 2017 Ford Taurus:
Can I get help with 2017 Ford Taurus Transmission Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Transmission Parts and more.
What is your return policy for Ford Taurus Transmission Parts?
Advance Auto Parts keeps returns simple. For new Ford Taurus Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
