2017 Ford Expedition Cooling and Climate Controls

Essential 2017 Ford Expedition Cooling and Climate Controls

Carquest Premium – New Premium Water Pump (Part No.T4194)

New Premium Water Pump

from

$129.99
This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. All necessary gaskets and seals are included.

Product Features:
  • This pump is used on accessory belt driven applications
  • Used mostly on models equipped with a fan clutch
  • It is highly recommended that the fan clutch be replaced with the water pump
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • All gaskets or seals necessary for installation are supplied with pump
See More

KAI – A/C Receiver Drier / Desiccant Element (Part No.ARD010107)

A/C Receiver Drier / Desiccant Element

from

$33.99
New Standard Replacement A/C Receiver Drier/Desiccant Element

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – HVAC Air Door Actuator (Part No.R2046685350DOR)

HVAC Air Door Actuator

from

$52.98
Dorman-engineered with robust materials to improve durability and performance, our HVAC Heater Blend Door Actuators restore and maintain proper functioning of the HVAC Heater Blend Door. Depending on the make and model of your vehicle, the same exact actuator could be suitable for any and all climate control blend door applications – consult Dorman’s website for specific information.

Product Features:
  • Direct replacement for a proper fit every time
  • Recommended for replacement during blend door replacement
  • High quality plastic housing and motor/circuit board included
  • Dorman’s quality testing ensures year after year of trouble-free service
See More

Factory Air – Rotary Selector Blower Switch (Part No.20046)

Rotary Selector Blower Switch

from

$35.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Vehicle specific applications
  • Zinc coated to resist corrosion
  • Rated to carry up to 20 amps
  • Quality contacts ensure proper conductivity
See More

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713975)

A/C Condenser and Receiver Drier Assembly

from

$199.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

Dorman – Coolant Tee And Radiator Hose O-Ring Kit (Part No.926-168)

Coolant Tee And Radiator Hose O-Ring Kit

from

$25.99
This coolant O-ring kit contains all the necessary O-rings to replace or repair the engine coolant pipe on specified vehicles.

Product Features:
  • Cost-effective repair – this kit allows you to directly replace coolant tee and radiator hose O-rings
  • Complete set – includes two large and one small O-ring
  • Application specific – strictly designed for certain Ford F150 and Mustang model years
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Motorcraft – Auxiliary Fan Assemb (Part No.G50001350515MTR)

Auxiliary Fan Assemb

from

$691.40
Auxiliary Fan Assemb

Carquest Premium – A/C New; w/ Clutch; w/ FS10 Compressor (Part No.T178588)

A/C New; w/ Clutch; w/ FS10 Compressor

from

$307.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
See More

Motorcraft – Blower Motor Regulat (Part No.R20411351486MTR)

Blower Motor Regulat

from

$59.41
Blower Motor Regulat

Dorman – Panel Trim Retainer – Interior – Ford (sold by each) (Part No.700-398)

Panel Trim Retainer - Interior - Ford (sold by each)

from

$1.29
All our Multi-Purpose Retainers are made of high quality materials for long-lasting durability. Offering a full line of Multi-Purpose Retainers for a wide range of applications.

Product Features:
  • Durable nylon design for a long service life
  • Also suitable for a broad variety of industrial and commercial uses
  • Conveniently packaged in a variety of piece counts
  • Direct replacement Retainers available (where applicable) to ensure a proper fit
See More

Carquest Premium – AC Pressure Sensor (Part No.ACA2003)

AC Pressure Sensor

from

$39.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Dorman – Pressurized Coolant Reservoir: Black And White, Plastic, Original Equipment Replacement (Part No.603-028)

Pressurized Coolant Reservoir: Black And White, Plastic, Original Equipment Replacement

from

$73.99
This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:
  • Direct replacement – this engine coolant reservoir matches the fit and function of the original part
  • Ideal solution – engineered for a seamless installation
  • Durable construction – manufactured from quality materials to withstand underhood heat and vibration
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-202)

HVAC Blend Door Actuator: 1 Piece

from

$42.49
This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:
  • Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations
  • Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace
  • Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
  • Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience
See More

KAI – Rad/Condenser Fan Assembly (Part No.FO3115184)

Rad/Condenser Fan Assembly

from

$154.99
New Platinum Pro Radiator And Condenser Fan Assembly, 3.5/3.7/4.6/5.0/5.4/6.2 Liter Engines

Product Features:
  • 3.5/3.7/4.6/5.0/5.4/6.2 Liter Engines, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Mahle – Water Pipe O-Ring (Part No.G2026372944MAH)

Water Pipe O-Ring

from

$7.19
Water Pipe O-Ring

Carquest Premium – Deck Lid / Liftgate Ajar Switch Connector (Part No.PTA1488)

Deck Lid / Liftgate Ajar Switch Connector

from

$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – HVAC Blower Motor Connector (Part No.PTA1511)

HVAC Blower Motor Connector

from

$42.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39365)

A/C Block Type O-Ring Expansion Valve

from

$28.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1029)

HVAC Blower Motor Resistor

from

$30.49
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Dorman – Help – Radiator Drain Cocks (Part No.61127)

Radiator Drain Cocks

from

$6.99
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:
  • Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
  • Durable construction – this part is made of quality materials for a long service life
  • Saves money – offers original equipment quality at a competitive price
  • Quality assured – this petcock has undergone virtual testing to assure proper fit and function
See More

Carquest Premium – Heater Core (Part No.398353)

Heater Core

from

$78.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Factory Air – System Mounted High Cut-Out Pressure Switch (Part No.20916)

System Mounted High Cut-Out Pressure Switch

from

$57.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Felpro – Engine Water Pump Gasket (Part No.35478)

Engine Water Pump Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Dorman – Power Outlet Socket (Part No.926-332)

Power Outlet Socket

from

$36.99
This 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this 12 volt accessory power outlet socket is designed to match the fit, function and appearance of the original socket on specified vehicles
  • Ideal solution – this socket is a reliable replacement for an original socket that is damaged or has failed due to fatigue or electrical malfunction
  • Durable construction – this socket is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Air Conditioning Service Port Caps (Part No.54374)

Air Conditioning Service Port Caps

from

$7.99
This A/C service valve cap is designed to match the fit and function of the original cap on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this A/C service valve cap is designed to match the fit and function of the original cap on specified applications
  • Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – HVAC Blower Motor Resistor Connector (Part No.PT1262)

HVAC Blower Motor Resistor Connector

from

$64.05
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our blower motor resistors are a direct-fit replacement electrically operated resistor that replaces damaged OE units restoring a/c and heater blower motor variable speed control
  • Each of our blower motor resistors is made from high quality ceramics with copper electrical connectors to ensure accurate and precise resistance values for long life and high performance.
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • All of our switches are made to OE spec to ensure proper fit, form and function
  • All parts are manufactured to stringent quality requirements.
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job.
See More

Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35534)

Standard Rotation Blower Motor Wheel

from

$24.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Durable Plastic Material
  • Meets all requirements of international standard ISO 140
  • Suitable for a wide variety of applications
  • Retainer clip installation
See More

Felpro – Engine Water Pump Gasket (Part No.36082)

Engine Water Pump Gasket

from

$14.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Unsurpassed quality you can trust
See More

2017 Ford Expedition Cooling and Climate Controls

You count on your 2017 Ford Expedition to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 83 Cooling and Climate Controls ranging in price from $1.29 to $457.99, you’re sure to find everything you need for your 2017 Ford Expedition.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 9 different brands like Permatex, Carquest Premium, and Dorman. 2017 Ford Expedition Cooling and Climate Controls start as low as $1.29!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 5,310 extensive product reviews on 2017 Ford Expedition Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Engine Coolant Reservoir Cap with 4.2 stars and Blower Motor: With Wheel with 3.9 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2017 Ford Expedition below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 2017 Ford Expedition

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2017 Ford Expedition running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Dorman, and even more.

Popular Permatex Cooling and Climate Controls

You’ll find popular Permatex brand products across Engine Cooling Parts. All are waiting to get your 2017 Ford Expedition back on the road. Some of the top-rated Permatex products in these categories are:
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets

Top-Rated Cooling and Climate Controls


If are what you’re looking for, our inventory holds plenty. We stock brand Cooling and Climate Controls for your 2017 Ford Expedition, and some of our most reviewed parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets

FAQs for 2017 Ford Expedition Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2017 Ford Expedition?

Out of 83 Cooling and Climate Controls for the 2017 Ford Expedition, the most popular in our inventory are:
HVAC Blower Motor Resistor
from $32.49
This product is not rated
HVAC Blower Motor Resistor
Blower Motor Resistors
Coolant Tee And Radiator Hose O-Ring Kit
from $25.99
This product is not rated
Coolant Tee And Radiator Hose O-Ring Kit
Engine Coolant Pipe O-Rings
HVAC Blend Door Actuator: 1 Piece
from $25.99
(13)
HVAC Blend Door Actuator: 1 Piece
Air Blend Door Actuators

What are the top-rated 2017 Ford Expedition Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 2017 Ford Expedition based on customer reviews/ratings are:
Engine Coolant Reservoir Cap
from $9.79
(26)
Engine Coolant Reservoir Cap
“It’s a great product because it fixed my problem with water spilling in reservoir”
Blower Motor: With Wheel
from $169.99
(19)
Blower Motor: With Wheel
“It blows!!!”
Standard Thermostat: 190 Degrees
from $25.99
(13)
Standard Thermostat: 190 Degrees
“Great part, perfect fit”