2017 Dodge Durango Bodies and Fender Parts

This liftgate release motor is designed to match the fit and function of the original motor on specified applications, and is engineered for reliable performance and durability.

Auveco products provide OE fit and function.

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

New Standard Replacement Driver Side Fender Liner

Auveco products provide OE fit and function.

Auveco products provide OE fit and function.

New Standard Replacement Passenger Side Fender Liner/Splash Shield

New Standard Replacement Driver Side Fender Liner/Splash Shield

While many side accessories feature a universal track mounting system for easier installation and inventory requirements, the ARIES VersaTrac mounting system takes things a step further. VersaTrac uses a single set of vehicle-specific brackets to accommodate different side accessory options. This not only means different finish options but also different products entirely. With the brackets installed, any side bar or running board equipped with the VersaTrac mounting system can be attached or swapped out whenever desired. The VersaTrac mounting system saves you time and money. It eliminates the need to purchase and install an entirely new set of mounting brackets with each new side accessory. The mounting brackets are available for purchase as a stand-alone item or as part of a complete kit with compatible side bars and running boards. Use the application information to determine which part numbers will fit your vehicle.

New Standard Replacement Driver Side Fender, Without Emblem Holes

New Economy Replacement Passenger Side Fender

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Stainless or Black

“For some, it’s more than just a drive. It’s about definition — finding the rush that comes with your hands on the wheel and your foot on the gas — and it starts by stepping into your vehicle with confidence. ARIES AeroTread running boards give new definition to your drive with their sleek design, full-length treads and flawless finish. They feature unencumbered aluminum construction and a custom contour to redefine your look and offer a solid step up. Made specifically for today’s crossover and SUV, ARIES AeroTread running boards are marked for their aerodynamic look and lightweight build. They are constructed from an extruded aluminum base, making them strong and impervious to the elements. Each set of running boards features sleek, curved edges with tapered ends to seamlessly blend with the body of your vehicle. To give you the exact, customized look you want, AeroTread running boards come with one of two front-trim finish options: polished stainless steel or black carbide powder-coated stainless steel. They are also equipped with a 5″” wide, hard plastic step pad that runs the entire length of the board, providing a non-skid surface no matter where you place your foot. AeroTread running boards install using a track mounting system to attach vehicle-specific brackets, and pre-existing holes in the vehicle’s frame are used to eliminate drilling, speed up installation and ensure stable footing. This set of running boards is designed to fit specific years of the Dodge Durango (see application information to verify compatibility with your vehicle). The mounting brackets are made from steel and are coated in a powder coat finish for long-lasting dependability. Whatever road you choose, define your drive with ARIES AeroTread running boards.”

New CAPA Certified Standard Replacement Front Lower Valance Panel, Code Mba [1.38 Inches Tall] Black Texture [With Accent Color]

New CAPA Certified Standard Replacement Front Bumper Lower Air Dam, Black

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Auveco products provide OE fit and function.

Laser measured mud flaps are custom fit to protect your vehicle fenders and exterior from rocks, mud, road grime and other debris. No drilling is required and our mud flaps install in minutes.

Laser measured mud flaps are custom fit to protect your vehicle fenders and exterior from rocks, mud, road grime and other debris. No drilling is required and our mud flaps install in minutes.

Auveco products provide OE fit and function.

“ARIES AdvantEDGE side bars do away with the common, rounded look of other side bars and nerf bars, featuring an angular, eight-sided tube profile and powder-coated all-aluminum construction. The angular edges provide a clear-cut, uncompromising accent for the look of today’s trucks. Made from 5-1/2″” wide, eight-sided, extruded aluminum tubing, AdvantEDGE side bars are strong, lightweight and impervious to rust, offering a solid step that is built to face the elements and outlast them. They also come with die-cast aluminum end caps and a stamped aluminum tread. The aluminum treads provide a long-lasting, non-skid stepping surface that will not crack or fade in the sun. ARIES AdvantEDGE side bars are also marked for their easy, custom-fit installation. They feature the ARIES VersaTrac mounting system with brackets that are made from powder-coated steel and built for specific vehicles (NOTE: VersaTrac mounting brackets are sold separately; see application information to determine which brackets and side bars fit your vehicle). The high-strength steel brackets mount using pre-existing holes, and the side bars attach to the brackets with heavy-duty hardware and a full-length channel. The VersaTrac mounting system makes installation simple and customizable, allowing the side bars to be swapped out at any time with other side steps or running boards that feature the VersaTrac system. Setting yourself apart is simple with the ARIES AdvantEDGE series. In addition to our AdvantEDGE side bars, we also offer the AdvantEDGE bull bar and AdvantEDGE headache rack, featuring the same all-aluminum construction and eight-sided tube profile. For a fully customized look to match your pickup, AdvantEDGE side bars are available in two finish options, including carbide black powder coat or chrome powder coat.”

“ARIES AdvantEDGE side bars do away with the common, rounded look of other side bars, nerf bars and running boards, featuring an angular, eight-sided tube profile and powder-coated all-aluminum construction. The angular edges provide a clear-cut, uncompromising accent for the look of today’s trucks. Made from 5-1/2″” wide, eight-sided, extruded aluminum tubing, AdvantEDGE running boards are strong, lightweight and impervious to rust, offering a solid step that is built to face the elements and outlast them. They also come with die-cast aluminum end caps and a stamped aluminum tread. The aluminum treads provide a long-lasting, non-skid stepping surface that will not crack or fade in the sun. ARIES AdvantEDGE side bars are also marked for their easy, custom-fit installation. They feature the ARIES VersaTrac mounting system with brackets that are made from powder-coated steel and built for specific vehicles. This particular set of custom running boards fits specific years of the Dodge Durango (see application info to verify compatibility). The high-strength steel brackets mount using pre-existing holes, and the aluminum running boards attach to the brackets with heavy-duty hardware. The VersaTrac mounting system makes installation simple and customizable, allowing the side bars to be swapped out at any time with other side steps or running boards that use the VersaTrac system. Setting yourself apart is simple with the ARIES AdvantEDGE series. In addition to these truck side steps, we also offer the AdvantEDGE bull bar and AdvantEDGE headache rack, featuring the same all-aluminum construction and eight-sided tube profile. For a fully customized look to match your pickup, AdvantEDGE side bars are available in two finish options, including carbide black powder coat and chrome powder coat.”

These mounting brackets are designed for vehicle-specific application and provide solid attachment for ARIES AeroTread running boards. They feature high-strength steel construction and a durable black powder coat finish. With a vehicle-specific design and the track mounting system of AeroTread running boards, you get a custom fit for your unique SUV and an easy-as-possible, no-drill installation. To verify which side bars and brackets will fit your specific vehicle, see the application information. All brackets will accommodate both finish options.