2017 Dodge Durango Exhaust System Kits

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Features Patented Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade T-304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

The MagnaFlow 2011-2026 Dodge Durango Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.6L, 5.7L 2011-2025 Dodge Durango with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 4 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Dodge Durango exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Durango’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15068 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15068 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• CNC precision robotic manufacturing techniques
• Durable corrosion-resistant stainless steel construction

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 4-1/2 IN diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched aFe POWER logo for a unique style. This system features high-flow 409 stainless steel polished mufflers, producing an aggressive sound. Muffler finish may vary. This system produces a deep sound unleashing all available horsepower and torque. Designed to equalize and evenly distribute exhaust pulses reducing drone, improving sound. Utilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. A mitered merge x-pipe is used to balance and evenly distribute exhaust pulses traveling through the exhaust system, minimizing exhaust drone and maximizing scavenging. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

Product Features:

• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing.
• Dual 4-1/2 IN Diameter Polished 304 Stainless Steel Clamp-On Exhaust Tips
• Utilizes Factory Style Flanges and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• All Necessary Hardware is Included for a Hassle-Free Installation

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0768 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0768’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. This Direct-Fit Exhaust System Kit is designed to fit the 2011-2025 Dodge Durango 3.6L & 2011-2025 Dodge Durango 5.7L. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0768 includes (2) Donut Gaskets, (1) Spring Bolt Kit, (4) 2.5in. U-Bolt Clamps and interchanges with OE parts 6810 5753AA, 6810 5753AB, 6810 5753AD, 6810 5753AE, 6810 5753AG, 6810 5753AH, 6821 7474AA, 6821 7474AC, 6821 7474AD, 6827 6639AA, 6827 6640AA, 6827 6640AB. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0768 features durable Aluminized Steel construction and is covered by a 2 year warranty.

Product Features:

• Two year, unlimited mileage warranty
• Leaves all emissions equipment intact, maintaining emissions compliance
• All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
• Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
• Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability

HEMI 5.7L engines often suffer from exhaust hardware failure due to rust, corrosion, and fatigue from thermal cycling. This kit offers a convenient way to service the manifold without spending time chasing the replacement components needed for a complete repair. The kit fits both sides of the engine and includes two exhaust manifold gaskets and two sets of mounting hardware for the exhaust manifold, catalytic converter flange, and exhaust pipe that match the function of those original components. Engineered to fit specified Chrysler, Dodge, Jeep and Ram vehicles equipped with 5.7L HEMI V8 engines, this all-in-one solution is designed to preserve and restore the proper function of the original equipment left-side exhaust manifold.

Product Features:

• Direct replacement – the components in this kit are designed to match the function of the original equipment exhaust manifold gaskets and mounting hardware on specified vehicles
• Time-saver – hassle-free alternative to searching for quality replacements for original equipment components that have failed from heat cycling or corrosion
• Application-specific – precision manufactured to fit specified Chrysler, Dodge, Jeep and Ram vehicles equipped with 5.7L HEMI V8 engines
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
• Contents: 2 Exhaust Manifold to Cylinder Head Gaskets; Exhaust Manifold to Cylinder Head Hardware; Exhaust Manifold Flange Hardware

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The factory-style fasteners used to secure the exhaust manifold to the cylinder head on certain vehicles are prone to cracking and failure from extreme thermal cycles and corrosion. This convenient Dorman OE FIX hardware kit contains application-specific studs, bolts and nuts made of 100 percent stainless steel that provide superior strength and resistance to corrosion. These fasteners are precision-manufactured to match the fit and function of the original equipment hardware, and help ensure a professional and more durable repair. The kit contains the studs, bolts and nuts required to install one exhaust manifold.

Product Features:

• Upgraded hardware – this set of M8-1.25 x 40mm exhaust manifold mounting studs, bolts and nuts are 100 percent stainless steel for superior heat and corrosion resistance
• Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
• Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience