2017 Chrysler 300 Ignition and Tune-Up Products
More 2017 Chrysler 300 Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 2017 Chrysler 300, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 2017 Chrysler 300 Ignition and Tune-Up Products
DENSO – First Time Fit Direct Ignition Coil – (Coil on Plug) (Part No.F3005458265ND)
from
$60.73
The Denso Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application
- Meets or exceeds the OE specifications for durability and performance
- High profile insulation to prevent arching.
- Radio-Frequency Interference (RFI) Suppression
- Engineered to withstand extremes in temperatures
Delphi – Ignition Coil (Part No.GN10372)
from
$51.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Carquest Premium – Spark Plug Boot: 1 Boot, Meets or Exceeds OE Specifications (Part No.35-7017)
from
$7.99
Carquest Premium spark plug boots are engineered to restore ignition boot reliability and performance. They are designed to meet or exceed original equipment (O.E.) specifications for fit, form and function. Our spark plug boots offer excellent heat resistance as well as maximum protection against spark loss. Carquest Premium spark plug boots are built with a durable silicone compound for resistance to high heat and abrasion, resulting in a longer-lasting ignition repair.
Product Features:
See More
Product Features:
- OE design provides an exact fit for your application
- Provides excellent heat resistance as well as maximum protection against spark loss
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the spark plug boot
- Design for direct compatibility
- Multipack provides one time replace all COP for better deal
Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-003CMP)
from
$51.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Carquest Premium – Ignition Capacitor (Part No.GAA1128)
from
$9.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Capacitor (Part No.GAA1127)
from
$18.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Switch (Part No.CSA4058)
from
$118.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Switch (Part No.CSA5017)
from
$42.99
Ignition Switch
Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8309)
from
$44.99
Product Features:
See More
- SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
- Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
- 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
- EPDM inner insulation stops power-robbing voltage leaks.
- With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
- Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
- Excellent interference suppression and consistent performance
- Easy lock terminals for more convenient installation.
- Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
- Broad coverage available for most vehicles on the road today
- Include grease pack to ensure easy installation and removal
NGK – Coil on Plug Boot (Part No.58968)
from
$11.29
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IXUH22 (Part No.5353)
from
$12.29
Increased performance with World’s smallest Iridium Center Eletrode (0.4mm).
Product Features:
See More
Product Features:
- World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
- Patented 360-degree laser welding assembly process
- U-groove and taper cut ground electrode to maximize flame propagation.
- Withstands temperatures greater than 4000° Fahrenheit
- Burnished nickel plating for high temperature endurance and superior corrosion resistance
- Wide range of part numbers for thousands of applications, including classic and collector cars
- Iridium Power
DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IKH16 (Part No.5343)
from
$11.79
Increased performance with World’s smallest Iridium Center Eletrode (0.4mm).
Product Features:
See More
Product Features:
- World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
- Patented 360-degree laser welding assembly process
- U-groove and taper cut ground electrode to maximize flame propagation.
- Withstands temperatures greater than 4000° Fahrenheit
- Burnished nickel plating for high temperature endurance and superior corrosion resistance
- Wide range of part numbers for thousands of applications, including classic and collector cars
- Iridium Power
Carquest Premium – Ignition Coil Connector (Part No.PTA2995)
from
$71.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Coil Connector (Part No.PTC1187)
from
$48.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
E3 – Ultra-High Output HEMI Coil, Chrysler (2006-Current) (Part No.E3.614)
from
$54.99
One of the nastiest production engines to come out of Detroit in the last twenty years has to be the late model Hemi and it can get even nastier with the addition of the ultra-high output E3.614 Hemi Coil. With more than double the energy output of a stock coil, E3s Hemi coil features a stainless steel spark plug contact ring and optimized resistance and inductance values which increase output at higher RPM levels. Our high temperature epoxy resists shock and vibration while providing excellent thermal conductivity ensuring extra-long life. Additionally, the spark plug boots are molded in a special high temperature 550 degree F silicone compound. Ideally suited for a wide range of both naturally aspirated and forced induction racing applications, E3.614 fits 5.7L, 6.1L, and 6.4L Hemi engines from 2006 to current model years. When coupled with an E3 Spark Plug featuring DiamondFIRE Technology, youll experience tire shredding power at its finest.
Product Features:
See More
Product Features:
- Double the energy output of a stock coil
- High temperature expoxy provides excellent thermal conductivity and long life
- Stainless steel spark plug contact ring and optimized resistance and inductance provide high output at higher RPM levels
- Fits 5.7L, 6.1L and 6.4L 2006-Current Hemi engines
- Crosses to MSD 8255
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3723)
from
$79.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Delphi – Knock Sensor (Part No.AS10266)
from
$23.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.
Product Features:
See More
Product Features:
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Delphi knock sensors prevent against engine damage from pre-ignition knocking
- Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Self-generating piezoelectric design requires no power to the sensor
Delphi – Knock Sensor (Part No.AS10167)
from
$23.29
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.
Product Features:
See More
Product Features:
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Delphi knock sensors prevent against engine damage from pre-ignition knocking
- Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Self-generating piezoelectric design requires no power to the sensor
DENSO – Iridium Long Life Spark Plug (Part No.F1000316471ND)
from
$16.00
The DENSO Iridium Long Life spark plug was specifically designed for long service life and consistent performance in the latest, most advanced production cars DENSO’s patented iridium alloy is more durable than even platinum, allowing the center electrode to be shrunk to only 0.7mm in diameter. This produces a dramatic improvement in ignitability and spark plug life. Closely related to platinum and exhibiting even tougher qualities, the rare metal iridium is an ideal material for spark plugs. A fine-wire, 0.7mm iridium center electrode is 360-degree laser welded in place using an exclusive DENSO process, and then matched to a platinum ground electrode. This pair of precision-formed, premium-metal electrodes dramatically extends the plug’s useful life.
Product Features:
See More
Product Features:
- Fine-wire iridium center electrode
- Platinum ground electrode
- 360 degree laser-welded spark tip
- Sustained spark performance over 100,000 miles
- Withstands higher pressures and temperatures
PerTronix – D7133801 Flame-Thrower Electronic Distributor Billet Ford FE 352-428 with Ignitor III Non Vacuum Red Cap (Part No.D7133801)
from
$414.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our I3 billet distributors ship with the all NEW Ignitor III multi-spark rev limiting modules. Replace your outdated points, electronic distributor
Product Features:
See More
Product Features:
- PerTronix D7133801 Flame-Thrower Electronic Distributor Billet Ford FE 352-428 with Ignitor III Non Vacuum Red Cap
- Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford
PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D133801)
from
$385.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance
Product Features:
See More
Product Features:
- PerTronix D133801 Flame-Thrower Electronic Distributor Billet Ford FE 352-428 Plug and Play with Ignitor II Technology Non Vacuum Advance Red Cap
- Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D143810)
from
$397.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance
Product Features:
See More
Product Features:
- PerTronix D143810 Flame-Thrower Electronic Distributor Billet Chrysler/Dodge/Plymouth 426-440 Plug and Play with Ignitor II Technology Non Vacuum Advance Black Male Cap
- Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D142710)
from
$385.99
Plug n’ Play billet distributors are designed for maximum ignition performance at a price you can afford. Our distributors ship with Ignitor II technology modules. Replace your outdated points, electronic distributor or bulky HEIs with this performance
Product Features:
See More
Product Features:
- PerTronix D142710 Flame-Thrower Electronic Distributor Billet Chrysler/Dodge/Plymouth 383-400 Plug and Play with Ignitor II Technology Vacuum Advance Black Male Cap
- Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
Carquest Premium – Coil On Plug Insulator Boot Multi Pack, Spring included (Part No.38-014CMP)
from
$35.99
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Carquest Premium – Spark Plug Boot: 1 Boot, Meets or Exceeds OE Specifications (Part No.35-7019)
from
$7.99
Carquest Premium spark plug boots are engineered to restore ignition boot reliability and performance. They are designed to meet or exceed original equipment (O.E.) specifications for fit, form and function. Our spark plug boots offer excellent heat resistance as well as maximum protection against spark loss. Carquest Premium spark plug boots are built with a durable silicone compound for resistance to high heat and abrasion, resulting in a longer-lasting ignition repair.
Product Features:
See More
Product Features:
- OE design provides an exact fit for your application
- Provides excellent heat resistance as well as maximum protection against spark loss
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the spark plug boot
- Design for direct compatibility
- Multipack provides one time replace all COP for better deal
Accel – Universal Fit Super Stock 8mm Copper; Spark Plug Wire Set (Part No.4039B)
from
$58.99
Performance upgrade for 7mm OE applications, silicone jacket with fiberglass braid EPDM insulation, tinned copper core, rated at 450 degrees Fahrenheit. Includes 8 blue extra-long wires, coil lead, silicone boots, zinc-plated steel terminals. Requires terminal and boot installation on distributor end.
Product Features:
See More
Product Features:
- Silicone Spark Plug Boots
- 90 Degree Spark Plug Boot Angle
- 450 Degree Wire Temperature Rating
- Meets Or Exceeds OE Boot Temperature Rating
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7020)
from
$7.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7018)
from
$7.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Popular 2017 Chrysler 300 Ignition and Tune-Up Products Categories
2017 Chrysler 300 Ignition and Tune-Up Products
You count on your 2017 Chrysler 300 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 83 Ignition and Tune-Up Products ranging in price from $3.49 to $441.99, you’re sure to find everything you need for your 2017 Chrysler 300.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 13 different brands like Autolite, NGK, and Champion. 2017 Chrysler 300 Ignition and Tune-Up Products start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 6,346 extensive product reviews on 2017 Chrysler 300 Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SXU22HCR11S with 4.8 stars and DiamondFIRE Automotive Spark Plug: More Power, Saves Gas with 4.4 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2017 Chrysler 300 below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 2017 Chrysler 300
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2017 Chrysler 300 running right for years to come. In our inventory you’ll find brands like Autolite, NGK, Champion, and even more.
Popular Driveworks Ignition and Tune-Up Products
You’ll find popular Driveworks brand products across Ignition Coils and Boots. All are waiting to get your 2017 Chrysler 300 back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Autolite Ignition and Tune-Up Products
If Autolite are what you’re looking for, our inventory holds plenty. We stock Autolite brand Ignition and Tune-Up Products for your 2017 Chrysler 300, and some of our most reviewed Autolite parts include:
from
$9.99
(166)
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
from
$4.79
(131)
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
Spark Plugs
from
$6.79
(87)
Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life
Spark Plugs
FAQs for 2017 Chrysler 300 Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 2017 Chrysler 300?
Out of 83 Ignition and Tune-Up Products for the 2017 Chrysler 300, the most popular in our inventory are:
from
$9.99
(48)
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
What are the top-rated 2017 Chrysler 300 Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 2017 Chrysler 300 based on customer reviews/ratings are:
from
$17.49
(117)
Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SXU22HCR11S
“Fort great have used them on many vehicles.”
from
$11.49
(68)
Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK16HR11
“Replaced the original plugs in my 2012Camry”
