2017 Chevrolet Suburban Exhaust Parts

ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that does not see much precipitation, or if you are looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine cylinders, allowing it to produce more power and improve vehicle performance and longevity.

Product Features:

• Aluminized Steel Construction
• Mandrel Bending Ensures No Rippling In The Bends
• Comes With 4 Inch OD Tip

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15356 brings out the personality of your SUV with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this SUV exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other SUV’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15356 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15356 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Upgraded hardware – this set of twelve M8-1.25 x 30mm exhaust manifold mounting bolts are 100 percent stainless steel for superior heat and corrosion resistance
• Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
• Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Complete your exhaust repair with a Walker® MEGA preformed band clamp. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:

• SUPERIOR SEAL — Provides superior 360° clamping and sealing on muffler inlets, outlets, elbow joints and pipe
• AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for your vehicle repair needs
• PREMIUM MATERIALS – Made from a variety of materials including low-carbon steel or stainless steel for durability and long life
• BETTER TOGETHER — Use Walker® accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

Complete your exhaust repair with an Exhaust Mate® U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:

• CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
• AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
• PREMIUM MATERIALS – Made from quality material for durability and long life
• BETTER TOGETHER — Use Walker® accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.

Product Features:

• Material Is Not Affected By Corrosion Or Extreme Heat
• The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
• Substantially Stronger Than Grade 8 Hardware
• Nominally Rated At 170,000 Psi Tensile Strength
• 3/8″-16 Thread Size
• 1″ Underhead Length

ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.

Product Features:

• Material Is Not Affected By Corrosion Or Extreme Heat
• The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
• Substantially Stronger Than Grade 8 Hardware
• Nominally Rated At 170,000 PSI Tensile Strength
• Set of 12
• 0.75″ Overall Length

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52642. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2016-2018 Chevrolet Silverado 1500, 2016-2020 Chevrolet Tahoe, and more, this direct-fit catalytic converter also interchanges with OE part 20757674. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

• EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal inME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
• OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:

• Mild to stock exterior exhaust tone
• Minimal interior resonance
• Excellent choice for large displacement vehicles
• Improved horsepower, torque and potential mileage improvement
• Race proven patented Delta Flow technology

The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.

Product Features:

• CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
• EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
• BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
• PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
• DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Complete your exhaust repair with Walker┬« gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

• AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizesfora quality vehicle repair
• HEAT RESISTANT — Designed to resist heat for long-lasting performance
• PREMIUM MATERIALS — Made from high-quality materials for durability and long life
• ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
• REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
• EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
• BETTER TOGETHER — Use premium Walker┬« accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:

• OE DESIGN — Designed with OE-style features for easy installation and fit
• PREMIUM MATERIALS — Made from high-quality materials for durability and long life
• AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
• KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
• BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

Product Features:

• Fuel Economy From The Engine
• Leak Test For Max Performance
• Ceramic Headers
• Rust And Corrosion Resistance
• Mandrel-Formed Power Plenum
• Leakproof O-Ringed Port Seals
• Include All Mounting Hardware

Product Features:

• Fuel Economy From The Engine
• Leak Test For Max Performance
• Mandrel-Formed Power Plenum
• Leakproof O-Ringed Port Seals
• Include All Mounting Hardware

GM Truck 14-19 5.3/6.2L Cat4Ward? Titanium Headers

The new Twisted Steel performance header from aFe Power is redefining the header industry with new pulse control technology. aFe engineers have designed this header using optimum tube lengths and mitered collectors for maximum flow and velocity for power delivery across the entire power band. Combine with a large 1/2″ thick head flange and 14-gauge 409 stainless steel tubing, you have a header that is strong and powerful. Twisted Steel headers are 100-percent bolt-on with no modifications necessary and are proudly engineered and built in Corona, CA.

Product Features:

• No Cutting Or Drilling Required
• Formed Collectors
• Heavy Duty Flanges

Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

• RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
• EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
• OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
• BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
• AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
• COMPATIBILITY — Ideal for weld or clamp installations

HEADER FLT BLOCK HUGGER

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Premium quality parts
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust

Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.

Product Features:

• High-Temperature Exhaust Material
• Withstands Extreme Exhaust Heat
• Provides Excellent Sealing And Durability
• Superior Tensile Strength
• Resists Deteriorating
• Provides Excellent Torque Retention

Exhaust Manifold/Header Hardware

Mr. Gasket CopperSEAL Header Gaskets are a high quality copper gasket that performs extremely well and are reusable. We recommend this in all racing and high performance applications. They are for stock heads unless indicated, and work well in high heat and turbocharged applications.

Product Features:

• Manufactured from ¿Dead Soft¿ (solid) .043″ thick copper material.
• Manufactured from ┐Dead Soft┐ (solid) .043″ thick copper material.
• .051″ embossment around each exhaust port to seal irregular surfaces. Total gasket thickness .094″
• Total gasket thickness .094″.
• Provides excellent sealing and durability
• Conforms to and seals minor surface irregularities
• For high performance street, drag race, oval track and turbocharged (extreme heat) applications.

Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.

Product Features:

• 100 Percent Flexible Graphite Construction
• Designed To Withstand Clamping Force And Incredible Heat
• Eliminate Exhaust Leaks
• No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque

Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.

Product Features:

• 100 Percent Flexible Graphite Construction
• Designed To Withstand Clamping Force And Incredible Heat
• Eliminate Exhaust Leaks
• No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque