2017 Audi S5 Cooling and Climate Controls

Essential Cooling and Climate Controls for 2017 Audi S5s

Santech – A/C Service Valve Co (Part No.R1254946899SII)

A/C Service Valve Co

from

$9.79
A/C Service Valve Co

Carquest Premium – New Compressor (Part No.T198394)

New Compressor

from

$401.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:
  • Endurance tested the equivalent of 50k miles
  • Includes specific electrical connector to eliminate splicing
  • Charged with lubricant to reduce internal friction promoting enhanced system performance and longevity
  • For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, o-rings, or seals needed to repair your car
See More

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA1027)

Engine Coolant Temperature Sensor

from

$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – A/C Condenser (Part No.CND3868)

A/C Condenser

from

$72.99
New Platinum Pro A/C Condenser, With Receiver Drier

Product Features:
  • With Receiver Drier, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1802)

A/C Refrigerant Pressure Sensor

from

$49.49
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Motorad – Integrated Thermostat Housing: With Seal, 185 Degrees (Part No.758-185)

Integrated Thermostat Housing: With Seal, 185 Degrees

from

$56.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Graf – Water Pump (Part No.G30002709741GRA)

Water Pump

from

$201.92
Water Pump

Carquest Premium – A/C Evaporator Temperature Sensor (Part No.WTA2021)

A/C Evaporator Temperature Sensor

from

$60.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Elring – Water Pump O-Ring (Part No.G3059279771ELR)

Water Pump O-Ring

from

$4.11
Water Pump O-Ring

Nissens – Nissens Blower Motor (Part No.R2031414650NSS)

Nissens Blower Motor

from

$320.93
Nissens’ interior blowers are high-quality spare parts designed and manufactured to comply 100% with the OE requirements, thoroughly tested to ensure the supreme product performance and durability. Nissens’ blower category offers competitive benefits such as easy and quick installation, long, trouble-free operation and enhanced comfort in the vehicle cabin.

Product Features:
  • Designed and manufactured 100% according to OE requirements
  • Advanced in-house performance, mechanical and electrical tests series acc. to strict standards
  • Plug and Play modules, ready to install and use
  • Test-proven, long-life, reliable operation
  • Very low noise emission
  • Detailed product technical info available in webshop and electronic catalogue
  • Packaging with supreme damage protection
  • Compact and elegant box design
  • Competitive product range covering most popular European applications
See More

Pierburg – Auxiliary Water Pump (Part No.G3050551811APG)

Auxiliary Water Pump

from

$160.71
Auxiliary Water Pump

Vaico – Water Pipe (Part No.G20252313625VCO)

Water Pipe

from

$227.67
Water Pipe

Rein – Expansion Tank (Part No.EPT0155)

Expansion Tank

from

$42.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:
  • Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
  • Resistant to cracking and wear from heat cycles preventing coolant loss
  • Direct fitment allows easy installation
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack (Part No.54019)

Engine Coolant Reservoir Cap: Twist, Plastic, 1 Pack

from

$20.99
Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:
  • Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
  • Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
  • Seamless fit – reverse-engineered from the original equipment to fit perfectly
  • Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership
See More

ACM – A/C O-Ring (Part No.R1150272370ACM)

A/C O-Ring

from

$1.68
A/C O-Ring

Beck/Arnley – Water Flange (Part No.147-0039)

Water Flange

from

$64.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Manufactured with high quality materials
  • Designed for underhood conditions
  • Quality constructed for durability
  • Application specific for this vehicle
See More

Rein – Radiator Mount (Part No.AVM0716)

Radiator Mount

from

$4.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
  • Part has a high corrosion resistance for maximum life
  • Produced with high quality materials to ensure maximum life and a smooth ride
  • Made by the OE manufacturer
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2268)

ABS Wheel Speed Sensor

from

$113.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12037)

Radiator Cap Tester Adapter

from

$75.99
Tester adapter for the 9300 and MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

ACM – Blower Motor Regulat (Part No.R2041414651ACM)

Blower Motor Regulat

from

$112.64
Blower Motor Regulat

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1888)

HVAC Blower Motor Resistor

from

$613.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Behr – Behr Radiator (Part No.G1000410484BEH)

Behr Radiator

from

$276.82
Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:
  • OE-Equivalent
  • Direct fit for easy installation.
  • High quality corrosion resistant materials.
  • OE Style mounting brackets and hose connections.
  • Mechanically bonded aluminum core.
  • Integrated transmission oil cooler when applicable.
See More

CRP – Cooling Hose Flange Plug (Part No.G202837841)

Cooling Hose Flange Plug

from

$0.86
Cooling Hose Flange Plug

Carquest Premium – Heater Core (Part No.910685)

Heater Core

from

$74.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Upgrade your 2017 Audi S5 with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2017 Audi S5, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Cooling and Climate Controls are key to keeping your S5 functioning at its best. At Advance Auto Parts, we offer a wide selection of 54 Cooling and Climate Controls for the 2017 Audi S5, designed to meet your needs without breaking the bank. From Engine Cooling Part replacements to Air Conditioning Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2017 Audi S5 at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $0.86 to $613.99, with an average price of $131.01. Our 54 Cooling and Climate Controls in stock come from 22 trusted brands, so you’re sure to find the right part for your 2017 Audi S5 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2017 Audi S5, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. With 306 customer reviews and counting, our 2017 Audi S5 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2017 Audi S5 is always ready to roll. We’re committed to providing you with everything you need to keep your S5 in top shape, all in one place. Start shopping confidently below for your 2017 Audi S5!

Best-Selling Engine Cooling Parts for 2017 Audi S5s

Enhance the driving experience in your Audi with 33 quality Engine Cooling Part components, starting at $0.86.

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Premium – Engine Coolant Reservoir Cap (Part No.10249)

Engine Coolant Reservoir Cap

from

$11.99
Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Elth – Water Temp. Sensor (Part No.C6020239910ELT)

Water Temp. Sensor

from

$24.17
Water Temp. Sensor

Motorad – Integrated Thermostat Housing: With Seal, 185 Degrees (Part No.758-185)

Integrated Thermostat Housing: With Seal, 185 Degrees

from

$56.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Pierburg – Pierburg Auxiliary Water Pump (Part No.G3050551666APG)

Pierburg Auxiliary Water Pump

from

$604.04
The product selection from Pierburg Pump Technology covers the complete range of applications for electric water circulation and coolant pumps in the automotive industry. Pierburg has extensive experience in the area of electric water pumps, especially with regard to EC engine technology and hydraulics. The canned motor concept was selected to meet the high requirements for operational reliability and service life. This special motor design has an additional tube placed in the space between the stator and the rotor, which keeps the stator statically sealed with respect to the medium pumped by the running rotor. Since this drive system requires no dynamic sealing elements which are subject to wear (rotating mechanical seals), the water circulation and coolant pumps are especially reliable and free of wear problems. Moreover, the EC motor used in the pumps requires no brushes. Eliminating the mechanical commutation system leaves the durability of the rotor bearings as practically the only limiting factor for service life. In addition to that, the lower number of moving parts results in significantly reduced noise.

Product Features:
  • OE Quality, reliability and service life
  • Reduction in noise
  • Leak-proof sealing of the drive
  • Fuel savings and reduced emissions
  • Cooling even without operation of the engine
  • Water circulation pump can deliver as much as 800 liters per hour
  • Coolant pump can deliver more than 9,000 liters per hour
See More

Rein – Expansion Tank (Part No.EPT0156)

Expansion Tank

from

$42.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:
  • Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
  • Resistant to cracking and wear from heat cycles preventing coolant loss
  • Direct fitment allows easy installation
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

APA/URO Parts – Water Pump Pulley (Part No.G3020808481APA)

Water Pump Pulley

from

$65.26
Water Pump Pulley

Behr – Radiator (Part No.G1000654657BEH)

Radiator

from

$422.61
Radiator

Behr – Behr, Radiator (Part No.G1000859643BEH)

Behr, Radiator

from

$365.30
Behr, Radiator

Nissens – Radiator (Part No.G10001096342NSS)

Radiator

from

$362.53
Plastic Tank / Aluminum Core Radiator The Nissens Radiator flat tube and double folded fin design offers a significantly better cooling capacity and provides a stronger exterior resisting impacts from stones. This advanced design helps to prevent damage which would negatively affect the cooling capacity and engine performance.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style mounting brackets and hose connections.
  • Integrated transmission oil cooler when applicable.
  • Compact and lightweight.
See More

Nissens – Nissens Radiator (Part No.G1000306439NSS)

Nissens Radiator

from

$339.15
Plastic Tank / Aluminum Core Radiator The Nissens Radiator flat tube and double folded fin design offers a significantly better cooling capacity and provides a stronger exterior resisting impacts from stones. This advanced design helps to prevent damage which would negatively affect the cooling capacity and engine performance.

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style mounting brackets and hose connections.
  • Integrated transmission oil cooler when applicable.
  • Compact and lightweight.
See More

Worldpac – WATER PUMP (Part No.G30002694752APG)

WATER PUMP

from

$308.34
WATER PUMP

Worldpac – Water Pump (Part No.G30002709741VNE)

Water Pump

from

$291.92
Water Pump

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813278)

Radiator: With Transmission Oil Cooler

from

$229.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

Graf – Water Pump (Part No.G30002709741GRA)

Water Pump

from

$201.92
Water Pump

Pierburg – Auxiliary Water Pump (Part No.G3050551811APG)

Auxiliary Water Pump

from

$160.71
Auxiliary Water Pump

Rein – Expansion Tank (Part No.G10302930692RIN)

Expansion Tank

from

$132.10
Expansion Tank

Rein – Coolant Pipe (Part No.CHP0810)

Coolant Pipe

from

$99.99
Coolant Pipe

Carquest Premium – Radiator Cap Tester Adapter (Part No.12037)

Radiator Cap Tester Adapter

from

$75.99
Tester adapter for the 9300 and MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Rein – Thermostat Assembly 85C (Part No.CTA0017)

Thermostat Assembly 85C

from

$68.99
Rein Automotive OE quality thermostat assemblies install, fit and perform the way the original manufacturer intended. This ensures a smooth and easy installation, just as one would expect to find with OE quality. These assemblies are designed to meet or exceed the OE materials used. Rein thermostats are produced with high-quality metals and components to ensure proper durability and service life. The thermostats are temperature calibrated to have a consistent and precise response suiting cooling system needs. Our quality thermostat assemblies aim to provide the professional repair technician and vehicle owner peace of mind and trust that is expected from an OE quality component

Product Features:
  • Matches Original Equipment design specifications
  • Direct fitment allows easy installation
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Made by the OE manufacturer
See More

Beck/Arnley – Water Flange (Part No.147-0039)

Water Flange

from

$64.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Manufactured with high quality materials
  • Designed for underhood conditions
  • Quality constructed for durability
  • Application specific for this vehicle
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Victor Reinz – Engine Coolant Thermostat Housing Gasket (Part No.71-39052-00)

Engine Coolant Thermostat Housing Gasket

from

$29.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Rein – Radiator Mount (Part No.AVM0702)

Radiator Mount

from

$14.49
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
  • Part has a high corrosion resistance for maximum life.
  • Produced with high quality materials to ensure maximum life and a smooth ride.
  • Made by the OE manufacturer.
See More

Reutter – Expansion Tank Cap (Part No.G1040180209REU)

Expansion Tank Cap

from

$11.24
Expansion Tank Cap

Febi – Radiator Insulator (Part No.G1024818596FEB)

Radiator Insulator

from

$9.65
Radiator Insulator

Autopart International Inc – Expansion Tank Cap (Part No.G10402046473API)

Expansion Tank Cap

from

$7.19
Expansion Tank Cap

Rein – Radiator Mount (Part No.AVM0716)

Radiator Mount

from

$4.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
  • Part has a high corrosion resistance for maximum life
  • Produced with high quality materials to ensure maximum life and a smooth ride
  • Made by the OE manufacturer
See More

Elring – Water Pump O-Ring (Part No.G3059279771ELR)

Water Pump O-Ring

from

$4.11
Water Pump O-Ring

Mahle – Water Flange O-Ring (Part No.G202437848MAH)

Water Flange O-Ring

from

$3.73
Water Flange O-Ring

Febi – Radiator Insulator (Part No.G1024818598FEB)

Radiator Insulator

from

$2.89
Radiator Insulator

CRP – Cooling Hose Flange Plug (Part No.G202837841)

Cooling Hose Flange Plug

from

$0.86
Cooling Hose Flange Plug

Most Popular 2017 Audi S5 Air Conditioning Parts

Customize your Audi with 16 Air Conditioning Parts products like AC Compressor With Clutch, Expansion Valve and Orifice Tubes, and AC Condensers, all priced under $401.99.

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83029)

A/C Desiccant Bag Kit

from

$38.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2268)

ABS Wheel Speed Sensor

from

$113.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Carquest Premium – New Compressor (Part No.T198394)

New Compressor

from

$401.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:
  • Endurance tested the equivalent of 50k miles
  • Includes specific electrical connector to eliminate splicing
  • Charged with lubricant to reduce internal friction promoting enhanced system performance and longevity
  • For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, o-rings, or seals needed to repair your car
See More

Nissens – A/C Condenser (Part No.R1030856433NSS)

A/C Condenser

from

$369.15
A/C Condenser

DENSO – First Time Fit A/C Conr (Part No.R1030687985ND)

First Time Fit A/C Conr

from

$257.99
Like all DENSO First Time Fit® A/C components, our condensers are designed and manufactured to integrate seamlessly with the vehicle’s original air conditioning system. DENSO condensers match up to OE condensers at every benchmark. Multiflow, subcooling, and the latest Ssrpentine condenser styles are offered to provide the optimum configuration for each application. Premium aluminum construction improves reliability, resisting corrosion to avoid expensive system leaks, while the superior fin wave design offers higher heat transfer and maximum refrigerant condensation. Heat exchanger cores are specially designed to shed airborne material buildup, allowing the A/C system to operate at peak efficiency with minimal maintenance, assuring years of trouble-free service.

Product Features:
  • Zinc diffusion layer improves corrosion resistance
  • Unique fin design to minimize airflow blockage
  • High performance design reduces the required compressor power
  • System Efficiency: Superior fin waves provide a higher heat transfer coefficient and full condensation.
  • Engineered to Perfection: OE quality engineered for unparalleled performance
  • Exact Fit: Condensers install with speed and ease
  • Reduces required compressor power, resulting improved fuel economy
  • Restores A/C performance to as-new condition
  • First Time Fit® assures bolt-in replacement; no brackets or adapters
  • Greater Durability: Pure aluminum construction provides greater resistance for corrosion
See More

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.713868)

A/C Condenser and Receiver Drier Assembly

from

$216.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2267)

ABS Wheel Speed Sensor

from

$112.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Autopart International Inc – A/C Receiver Drier (Part No.R10403311394API)

A/C Receiver Drier

from

$74.98
A/C Receiver Drier

KAI – A/C Condenser (Part No.CND2994)

A/C Condenser

from

$73.99
New Platinum Pro A/C Condenser, 2.0/3.0 Liter Engines

Product Features:
  • 2.0/3.0 Liter Engines, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Santech – A/C Expansion Valve (Part No.R1045660914SII)

A/C Expansion Valve

from

$61.33
A/C Expansion Valve

Carquest Premium – A/C Evaporator Temperature Sensor (Part No.WTA2021)

A/C Evaporator Temperature Sensor

from

$60.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1802)

A/C Refrigerant Pressure Sensor

from

$49.49
The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Carquest Premium – A/C Filter Drier with Pad Mount (Part No.T83189)

A/C Filter Drier with Pad Mount

from

$33.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Block Expansion Valve (Part No.T39509)

A/C Block Expansion Valve

from

$23.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Santech – A/C Service Valve Co (Part No.R1254946899SII)

A/C Service Valve Co

from

$9.79
A/C Service Valve Co

Rein – A/C O-Ring (Part No.R1150324905RIN)

A/C O-Ring

from

$1.84
A/C O-Ring

Top Picks for 2017 Audi S5 Blower Motor and Related Products

Upgrade Audi S5s with top-quality Blower Motor and Related Products parts, including 4 OEM and aftermarket selections for your 2017 model.

Carquest Premium – Blower Motor: With Wheel (Part No.75030)

Blower Motor: With Wheel

from

$96.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Behr – Blower Motor (Part No.R2031452037BEH)

Blower Motor

from

$177.34
Behr manufactures an OEM quality replacement Blower Motor that guarantees the same performance, fitment and durability as that of the original unit it replaces. Behr’s advanced blower design provides boosted airflow performance, are highly efficient, and quiet-running, which provides excellent acoustic comfort from the climate control system.

Product Features:
  • OEM Quality.
  • Direct Fit Replacement.
  • Highly efficient
  • Quiet-running
  • Meets or exceeds OE design and performance.
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1888)

HVAC Blower Motor Resistor

from

$613.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Worldpac – Blower Motor Regulat (Part No.R20413554640BEH)

Blower Motor Regulat

from

$116.62
Blower Motor Regulat

In-Demand Heating Parts for 2017 Audi S5s

Select from 1 premium Heating Parts parts for your 2017 Audi S5.

Carquest Premium – Heater Core (Part No.910685)

Heater Core

from

$74.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Top-Rated Cooling and Climate Controls Brands For Your 2017 Audi S5

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2017 Audi S5s. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2017 S5 start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2017 Audi S5 Cooling and Climate Controls

When it comes to maintaining or upgrading your 2017 Audi S5, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2017 Audi S5. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ
from
$38.99
This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

Popular Carquest Premium 2017 Audi S5 Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2017 Audi S5 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2017 S5, Advance Auto Parts carries a full inventory of 15 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Audi in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $11.99 to $613.99, plus, with more than 11 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

ABS Wheel Speed Sensor
from
$113.99
This product is not rated

ABS Wheel Speed Sensor

“”

New Compressor
from
$401.99
This product is not rated

New Compressor

“”

HVAC Blower Motor Resistor
from
$613.99
This product is not rated

HVAC Blower Motor Resistor

“”

FAQs for 2017 Audi S5 Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2017 Audi S5s?

Out of 54 Cooling and Climate Controls that fit 2017 Audi S5s, the following parts are the top sellers:

What’s the price range for 2017 Audi S5 Cooling and Climate Controls?

Cooling and Climate Control prices for the 2017 Audi S5 start at $0.86 and go up to $613.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2017 Audi S5?

The average price for Cooling and Climate Controls for the 2017 Audi S5 is $131.01. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Audi S5 model years?

Yes, we currently carry Cooling and Climate Controls for 16 model years of Audi S5s between 2008 and 2024. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2016, 2015, and 2014.

What are the cheapest Cooling and Climate Controls for my 2017 Audi S5?

The cheapest 2017 Audi S5 Cooling and Climate Controls we carry in stock are:

What are the top-rated Cooling and Climate Controls that fit the 2017 Audi S5?

Out of 306 reviews by customers, our 2017 Audi S5 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2017 Audi S5 and their top-rated products:

What types of Cooling and Climate Controls do you sell for my 2017 Audi S5?

Can I get help with 2017 Audi S5 Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Cooling and Climate Controls and more.

What is your return policy for Audi S5 Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Audi S5 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.