2017 Acura TLX Catalytic Converters

The catalytic converter heat shield bolt is essential for keeping heat from the exhaust system, away from adjacent car parts and flammable materials positioned under the vehicle. Our direct replacement heat shield bolt secures and holds the catalytic converter heat shield in place.

Product Features:

• Direct replacement ensures a proper fit every time
• For extra protection our Heat Shield Bolts are galvanized for rust-resistance
• Easy to install – No special tools required during installation
• Testing on this part includes salt water corrosion and hardness testing for conformance to product standards and quality

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52027. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2013-2017 Honda Accord and 2015-2017 Acura TLX, this direct-fit catalytic converter also interchanges with OE parts 18150-5G0-A51 and 18150-5G1-305, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51655. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
• Compact, lightweight construction enables installation in confined areas, welding is required.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:

• CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
• SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
• BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty

Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

• CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
• BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52023. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2013-2017 Honda Accord and 2015-2017 Acura TLX, this direct-fit catalytic converter also interchanges with OE parts 18150-5A0-A00 and 18150-5A2-A50, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
• Simplifies installation with essential gaskets and hardware being included in the box.
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:

• CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
• SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability

This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:

• Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
• Convenient kit – includes gaskets and downpipe hardware to simplify installation
• Durable construction -manufactured within strict tolerances for reliable longevity
• Trustworthy value – backed by team of engineers and quality control experts in the United States

Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:

• CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
• CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
• DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
• SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
• BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty

Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:

• CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
• CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
• DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
• SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
• BUY WITH CONFIDENCE — Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty

This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:

• Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
• Convenient kit – includes gaskets and downpipe hardware to simplify installation
• Durable construction -manufactured within strict tolerances for reliable longevity
• Trustworthy value – backed by team of engineers and quality control experts in the United States