2016 Toyota Sienna Suspension Parts
More 2016 Toyota Sienna Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 2016 Toyota Sienna, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 2016 Toyota Sienna Suspension Parts
Firestone Ride-Rite – Controls Two Air Springs Individually, Switch Operated (Part No.2219)
from
$1023.99
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.
Product Features:
See More
Product Features:
- Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
- Provides An Instant Air Source For The Air Helper Springs Or Accessories
- Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
Firestone Ride-Rite – Controls Two Air Springs Simultaneously, With Compressor/Wiring Harness/Sensors (Part No.2543)
from
$1154.99
While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.
Product Features:
See More
Product Features:
- Controls Two Air Springs Simultaneously
- Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
- Provides An Instant Air Source For The Air Helper Springs Or Accessories
- Single Point Fill (Both Air Springs Fill To The Same Pressure)
- Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)
Dorman – Suspension Control Arm (Part No.521-813)
from
$196.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Control Arm (Part No.L2000285730DOR)
from
$165.50
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm and Ball Joint Assembly is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.
Product Features:
See More
Product Features:
- Ball joints and bushings (when applicable) included for a complete installation, saving time and labor (where applicable)
- Direct replacement for a trouble-free installation
- Steel, iron or aluminum construction ensures durability
- Powder-coated or painted for long-lasting rust and corrosion resistance
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.182981)
from
$179.99
Engineered to get more miles from your vehicle, the RoadMatic strut assembly includes all required components in a single unit. It meets OE specifications and reduces installation time, eliminating the need for a spring compressor.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- GET MORE MILES FROM YOUR RIDE – Engineered and fit and ride tested to meet OE spec
- EASY TO INSTALL – Fully integrated design reduces installation time, eliminating the need for a spring compressor
- CONSISTENT PERFORMANCE – Features nitrogen gas-charge and all-weather fluid for improved ride and handling
- COVERAGE – Available for domestic and import passenger cars, light trucks and SUVs
Suncore – Complete Strut Assem (Part No.55S11992)
from
$139.99
Complete Strut Assem
Monroe – Strut-Mate Strut Boot Kit (Part No.63640)
from
$28.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
International Suspension Group – Ride Control Shock Absorber (Part No.L4000654361ISG)
from
$55.28
The International Suspension Group advanced engineering team designed the Ride Control Valving to allow these premium shocks to sense the vehicles velocity and road conditions. The Ride Control shocks adjust constantly to the road for enhanced performance, ensuring superior handling, ride control and comfort.
Product Features:
See More
Product Features:
- Vented Striker Plate – Eliminates seal damage and prolongs strut life
- Teflon Banded Piston Seal – Provides superior sealing
- Multi-Shim Valve – For superior handling control and comfort
- Twin Tube Design – For extra protection, strength and durability
- Micro-polished Double Chrome plated Piston – Extra protection against pitting and rusting
- PBT Bump Stop – Dampens noise and stops metal to metal contact
- Machine Mounting Eyes – Seamless for strength and durability
International Suspension Group – Ride Control Shock Absorber (Part No.L40001339589ISG)
from
$68.08
The International Suspension Group advanced engineering team designed the Ride Control Valving to allow these premium shocks to sense the vehicles velocity and road conditions. The Ride Control shocks adjust constantly to the road for enhanced performance, ensuring superior handling, ride control and comfort.
Product Features:
See More
Product Features:
- Vented Striker Plate – Eliminates seal damage and prolongs strut life
- Teflon Banded Piston Seal – Provides superior sealing
- Multi-Shim Valve – For superior handling control and comfort
- Twin Tube Design – For extra protection, strength and durability
- Micro-polished Double Chrome plated Piston – Extra protection against pitting and rusting
- PBT Bump Stop – Dampens noise and stops metal to metal contact
- Machine Mounting Eyes – Seamless for strength and durability
Sachs – Suspension Strut Mount (Part No.L3030750277SAC)
from
$78.26
SACHS Suspension Strut Mount repair kits are designed to return the mount and bearing to Original Equipment standards.
Product Features:
See More
Product Features:
- SACHS Suspension Strut Mounts meet or exceed the OE designed specifications for the vehicle.
- SACHS Strut Mounts are designed to restore smooth steering while reducing vibrations and noise.
- It is highly recommended to replace your mounts, shocks and or struts in pairs.
Monroe – Strut-Mate Strut Mounting Kit (Part No.903906)
from
$78.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
KYB – Bushings, Washers, Bumper and Below (Part No.SM5840)
from
$41.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
Monroe – Suspension Strut (Part No.73094)
from
$118.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
- LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
- OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
- Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
MANDO – New Complete Strut Assembly (Part No.MSS050238)
from
$136.99
HL Mando is the Original Equipment manufacturer to offer a Complete Strut Assembly to the traditional automotive aftermarket. Save time & energy without the need for coil spring compressor tools, choose HL Mando Complete Strut replacements.
Product Features:
See More
Product Features:
- Precision Engineered by OE Suspension System Manufacturer
- Tested for Quality, Durability, and Reliability
Autopart International Inc – Strut Mounting Kit (Part No.L30332049870API)
from
$36.08
Strut Mounting Kit
MTC – Strut Bearing (Part No.L3035169712MTC)
from
$34.91
MTC Strut Bearings are made of high-quality OE materials for long life. They help improve strut assembly operation by increasing damping and restoring smooth steering ability.
Product Features:
See More
Product Features:
- Reduces suspension, road noises and vibrations
- Mount bearings provide smoother steering and help retain front end alignment
- Are built with design and quality that matches or exceeds OE quality
MOOG – Shock Mount (Part No.K201681)
from
$39.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Returns like-new steering
- Long-lasting performance
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Driveworks – Strut Bellow (Part No.DW-K90460)
from
$11.99
Driveworks Shock Mount, Suspension Strut Bellows
Product Features:
See More
Product Features:
- Designed to meet or exceeds OE performance specifications
- Durable neoprene rubber
KYB – Jounce Bumper and Bellows (Part No.SB102)
from
$30.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
KYB – Strut Mount and Bearing (Part No.SM5804)
from
$75.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
MOOG – Suspension Coil Spring Seat (Part No.K160251)
from
$24.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
International Suspension Group – Spring Seat (Part No.L5005326077ISG)
from
$16.94
Spring Seat
Rare Parts – Spring Seat (Part No.RP52753)
from
$29.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Reduces road noise
- Reduces vibration
- UV resistant
MOOG – Suspension Coil Spring Seat (Part No.K90725)
from
$18.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
MTC – Spring Seat Insulator (Part No.L501363590MTC)
from
$24.32
MTC Spring Seat Insulators eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. MTC Spring Seat Insulator cushions the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle.
Product Features:
See More
Product Features:
- Eliminates vibration and noise
- Reduces squeaks, rattles, and vibration noise
- Quality that matches or exceeds OE
KYB – Spring Seat Insulator (Part No.SM5441)
from
$20.99
KYB spring seats and insulators eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB spring seats and insulators have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Spring Insulator Available
- Reduces Squeaks, Rattles And Vibration Noises
- Built With Design And Quality That Matches Or Exceeds Original Equipment
Rare Parts – Spring Seat (Part No.RP47045)
from
$40.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Reduces road noise
- Reduces vibration
- UV resistant
Monroe – Strut-Mate Coil Spring Insulator (Part No.904951)
from
$23.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Popular 2016 Toyota Sienna Suspension Parts Categories
2016 Toyota Sienna Suspension Parts
You count on your 2016 Toyota Sienna to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 51 Suspension Parts ranging in price from $11.99 to $1,217.99, you’re sure to find everything you need for your 2016 Toyota Sienna.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 12 different brands like Monroe, Moog, and DriveWorks. 2016 Toyota Sienna Suspension Parts start as low as $11.99!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 191 extensive product reviews on 2016 Toyota Sienna Suspension Parts.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2016 Toyota Sienna below to get started!
Top-Rated Suspension Parts Brands For Your 2016 Toyota Sienna
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2016 Toyota Sienna running right for years to come. In our inventory you’ll find brands like Monroe, Moog, DriveWorks, and even more.
Popular KYB Suspension Parts
You’ll find popular KYB brand products across Shocks and Struts. All are waiting to get your 2016 Toyota Sienna back on the road. Some of the top-rated KYB products in these categories are:
Top-Rated Monroe Suspension Parts
If Monroe are what you’re looking for, our inventory holds plenty. We stock Monroe brand Suspension Parts for your 2016 Toyota Sienna, and some of our most reviewed Monroe parts include:
FAQs for 2016 Toyota Sienna Suspension Parts
What are the most purchased Suspension Parts for the 2016 Toyota Sienna?
Out of 51 Suspension Parts for the 2016 Toyota Sienna, the most popular in our inventory are:
