2016 Toyota Land Cruiser Steering and Chassis Parts
More 2016 Toyota Land Cruiser Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2016 Toyota Land Cruiser, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2016 Toyota Land Cruiser Steering and Chassis Parts
Rare Parts – Ball Joint (Part No.RP12743)
from
$119.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Rare Parts – Sway Bar Link (Part No.RP19715)
from
$57.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Product Features:
See More
- Power steering oil cooler
- 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Carquest Premium – End Fitting (Part No.34828)
from
$21.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Zinc coated tubes protect against rust and corrosion
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
Rein – Power Steering High Pressure Feed Assembly (Part No.PSH0328)
from
$84.99
Rein OE Quality power steering high pressure feed hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.
Product Features:
See More
Product Features:
- A direct fit, replacement hose and line assembly
- SAE J188 compliant high pressure rubber compound hose with internal noise absorber
- SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
- Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
- Pre attached protective jacket(s) and heat sleeve(s), where required
Dorman – Suspension Control Arm (Part No.520-447)
from
$379.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.522-617)
from
$141.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
MOOG – Caster/Camber Adjusting Kit (Part No.K100381)
from
$98.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Provides caster and pinion angle adjustments on vehicles with frozen OEM bolts
- Greaseable allowing for ease of future adjustments
- Adjustment Range: +/- 1.5 Degrees
- Easy to install
- Construction and design validated by MOOG engineers
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$31.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Cardone – Power Steering Filter (Part No.20-0058F)
from
$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)
from
$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Return Hose Assembly (Part No.40149)
from
$46.49
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Heat/abrasion tubing protects vital areas
Rein – P/S Oil Pressure Swi (Part No.M20951150035RIN)
from
$93.35
P/S Oil Pressure Swi
MOOG – Rack & Pinion Bellows Kit (Part No.K150324)
from
$33.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Rare Parts – R & P BELLOWS (Part No.RP57356)
from
$55.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Protects Rack & Pinion surfaces from contamination
- Hardware included
EMPI – re Steering Rack Boot (Part No.M1010849054EMP)
from
$16.24
The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Rare Parts – Tie Rod End (Part No.RP28927)
from
$79.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP28818)
from
$89.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
MOOG – Tie Rod End (Part No.ES800314)
from
$59.99
Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
PWR – New Hydraulic Power Rack and Pinion (Part No.42-2255)
from
$822.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR Rack and Pinions are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
- Precision Routed and Constructed Fluid Transfer Tubes
- Manufactured to meet or exceed OE requirements
- Engineering, test, and quality validation in the USA
PWR – New Hydraulic Power Rack and Pinion (Part No.42-2660)
from
$977.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR Rack and Pinions are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
- Precision Routed and Constructed Fluid Transfer Tubes
- Manufactured to meet or exceed OE requirements
- Engineering, test, and quality validation in the USA
Atlantic Automotive Eng. – Steering Rack, New (Part No.M1000303651AAE)
from
$653.28
With over 28 years of Steering Systems manufacturing experience, you can expect Best In Class performance from AAE’s New products The first NEW Rack and Pinion and Power Steering Pump Product line for the Automotive Aftermarket. By eliminating original design flaws and taking advantage of AAE’s vast product specific manufacturing experience, these NEW racks and pumps are the Best In Class alternative replacement parts
Product Features:
See More
Product Features:
- All NEW products have been re-engineered for improved durability and performance
- Every part is 100% hydraulically tested under load for vehicle simulation.
PWR – New Power Steering Pump with Pulley (Part No.60-6704P)
from
$331.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR “INSTALLATION READY” Power Steering Pumps are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE DIE CUT FOAM PACKAGING, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Supplied with a Pre-Installed Pulley, Return line fitting, as well as the required Installation Seals, Washers, Return Line Clamp, and Instructions
- Enables you to achieve a more efficient, durable, and professional installation
PWR – New Power Steering Pump with Pulley (Part No.60-5345P)
from
$341.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR “INSTALLATION READY” Power Steering Pumps are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE DIE CUT FOAM PACKAGING, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Supplied with a Pre-Installed Pulley, Return line fitting, as well as the required Installation Seals, Washers, Return Line Clamp, and Instructions
- Enables you to achieve a more efficient, durable, and professional installation
PWR – New Power Steering Pump with Pulley (Part No.60-5347P)
from
$268.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR “INSTALLATION READY” Power Steering Pumps are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE DIE CUT FOAM PACKAGING, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Supplied with a Pre-Installed Pulley, Return line fitting, as well as the required Installation Seals, Washers, Return Line Clamp, and Instructions
- Enables you to achieve a more efficient, durable, and professional installation
Popular 2016 Toyota Land Cruiser Steering and Chassis Parts Categories
2016 Toyota Land Cruiser Steering and Chassis Parts
You count on your 2016 Toyota Land Cruiser to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 36 Steering and Chassis Parts ranging in price from $11.49 to $977.99, you’re sure to find everything you need for your 2016 Toyota Land Cruiser.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 12 different brands like Imperial, Cardone, and Moog. 2016 Toyota Land Cruiser Steering and Chassis Parts start as low as $11.49!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 187 extensive product reviews on 2016 Toyota Land Cruiser Steering and Chassis Parts.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2016 Toyota Land Cruiser below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2016 Toyota Land Cruiser
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2016 Toyota Land Cruiser running right for years to come. In our inventory you’ll find brands like Imperial, Cardone, Moog, and even more.
Popular Cardone Steering and Chassis Parts
You’ll find popular Cardone brand products across Power Steering Parts. All are waiting to get your 2016 Toyota Land Cruiser back on the road. Some of the top-rated Cardone products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 2016 Toyota Land Cruiser, and some of our most reviewed Imperial parts include:
FAQs for 2016 Toyota Land Cruiser Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2016 Toyota Land Cruiser?
Out of 36 Steering and Chassis Parts for the 2016 Toyota Land Cruiser, the most popular in our inventory are:
