2016 Ram 1500 Exhaust System Kits

The MagnaFlow Street Series Cat-Back Performance Exhaust System 16870 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16870 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16870 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The BORLA(R) Cat-Back(TM) name implies the exhaust system is located behind the factory catalytic converter where there factory emissions remain untouched and vehicle stays emissions compliant. This remains distinct from the Axle Back exhaust system that is located behind the rear axle. The Cat-Back performance exhaust in 1978, a bolt-on replacement performance exhaust system requiring no welding, thus being secured using the factory hanger locations.

Product Features:

• Mufflers In Systems Are Designed, Tested, And Optimized Specifically For A Particular Year, Make, And Model Vehicle
• Increase The Overall Sound Level And Performance
• Replaces The Factory Exhaust System
• Exhausts Constructed In Aircraft Grade T-304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Constructed Of Mandrel Bent Stainless Steel
• Free Flowing Muffler For An Aggressive Sound
• Bayonet Style Hangers For Easy Installation
• Band Clamps And Hardware For Hassle-Free Installation

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Features Patented Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade T-304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

The Street Series Black Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound. Features Black coated tips.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Dual 6in. Black Powder coat Tips w/Laser Cut aFe Badges
• Increased Flow And Performance
• High Quality Band Clamps

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15249 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15249 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15249 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow Street Series Cat-Back Performance Exhaust System 15250 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Before Passenger Rear Tire exit with 3.5in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Very Aggressive exterior and Aggressive interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15250 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15250 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow Street Series Cat-Back Performance Exhaust System 16869 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16869 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16869 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow Street Series Cat-Back Performance Exhaust System 16868 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Before Passenger Rear Tire exit with 3.5in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Very Aggressive exterior and Aggressive interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16868 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16868 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow Street Series Cat-Back Performance Exhaust System 16386 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16386 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16386 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Engineered to perform in the most extreme environments. Constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque and lower EGTS. All systems use factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 deg. sealing surface. A free flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe locations during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Dual 6in. Black Powder coat Tips w/Laser Cut aFe Badges
• Increased Flow And Performance
• High Quality Band Clamps

This Mach FORCE Xp exhaust system is constructed of 5″ mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Maximum Flow
• High Flow Muffler
• Bayonet Style Hangers For Easy Installation

The MagnaFlow Ram 1500 Street Series 19359 has been designed from the ground up to make your 3.0L 2014-2018 Ram 1500 sound like and haul like it should thanks to its heavily dyno-tested, durable and corrosion resistant stainless steel design. This Ram 1500 exhaust kit is tuned to produce Moderate exterior and Mild interior sound levels through its fast-flowing, mandrel bent 3in. main piping and is compatible with 3.0L engines. The system terminates in a Dual Split Rear exit with 5in. Polished Welded-Double Wall-Angle Cut-Rolled Edge tip. Exhaust kit 19359 is tuned to produce our powerful, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. It does this with a filter-back layout that replaces your diesel truck¿s stock exhaust system from the particulate filter on back. Extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design. Once you hit the road or trail with this exhaust system hooked up your rig will stand out from the rest as the truest of trucks. 19359 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow¿s limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The MagnaFlow Off-Road Pro Series Cat-Back Performance Exhaust System 17108 17108 brings additional off-roading prowess and our deep signature exhaust note to your Truck with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17108 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Truck exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17108’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 3in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17108 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• 100% Stainless Steel
• High flow straight through design

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 3 in. 409 Stainless Steel Tubing
• Hassle Free Installation
• Free Flow Muffler
• Aggressive Sound

Simple Installation: This DPF-back exhaust system uses factory mounting locations providing stability and hassle-free installation._x000d_OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time._x000d_Flow and Performance: This Large Bore-HD DPF-back exhaust system is constructed of 3″ to 3-1/2″ mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGT’s._x000d_5″ Diameter Black Intercooled Tip: Finishing off the exhaust is a 5″ diameter, black, stainless steel slash cut tip with intercooling vents designed to reduce exhaust gas temperatures at the tailpipe. A unique stainless steel laser-cut aFe POWER logo plate is riveted on for an aggressive style._x000d_Fitment Note: Crew Cab / 5’7″ Bed (140″ Wheelbase), Crew Cab / 6’4″ Bed (149″ Wheelbase), Quad Cab / 6’4″ Bed (140″ Wheelbase)_x000d_Note: This system requires cutting behind the DPF unit._x000d_Emissions Disclaimer: This product does not require a CARB EO#._x000d_aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.

Product Features:

• Constructed from 3 to 3-1/2 Mandrel-Bent Stainless Steel Tubing
• Uses a High Quality Band Clamp and OE-Style Bayonet Hangers for a Secure Fit
• Utilizes all Factory Mounting Locations to Provide a Quick, Hassle-Free Installation
• Includes a Massive 5 Dia. Black Stainless Steel Intercooled Tip With a Laser-Cut aFe POWER Badge

Simple Installation: This DPF-back exhaust system uses factory mounting locations providing stability and hassle-free installation.OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions.

Product Features:

• Constructed from 3 to 3-1/2 Mandrel-Bent Stainless Steel Tubing
• Uses a High Quality Band Clamp and OE-style bayonet Hangers for a Secure Fit
• Utilizes all Factory Mounting Locations to Provide a Quick, Hassle-Free Installation
• Includes a Massive 5 Dia. Polished Stainless Steel Intercooled Tip with a Laser-Cut aFe POWER badge

Exhaust Kit