2016 Nissan Frontier Air Suspension and Kits

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

• The highest quality replacement strut mount available
• Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
• Superior rubber reduces noise, vibration and harshness
• Mount bearings provide smoother steering and help retain front end alignment
• Matched grade studs and nuts

Ride Rite(TM) air helper springs mount between the frame and the suspension of light trucks, vans, and motor homes. The heavy duty convoluted air springs will handle all leveling needs with load carrying capacities between 3200 to 5000 Pounds per set.

Product Features:

• Level The Vehicle Front To Rear And Side To Side
• Adjustability 5 To 100 PSI
• Stabilize The Vehicle While Loaded
• Maximize Vehicles Load Carrying Capacity
• Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

Belltech Lowering Blocks provide an inexpensive, easy to install way to lower your vehicle by increasing the distance between the leaf spring and the axle, effectively lowering the vehicle.

Product Features:

• Extruded Aluminum Construction
• Fits Most Mini/Mid-Size Trucks W/ 3 Inch Axle Tube
• Lowering Blocks Are Designed To Lower The Rear Of Your Vehicle In 1,2 Or 3 Inch Increments

Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

• Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
• Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
• Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
• Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
• Economical And Trouble Free
• Simple And Easy To Install

Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:

• Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:

• Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
• Enhanced anti-shudder protection for smooth shifting and maximum power transfer
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:

• Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
• Formulated to help prevent gear wear and protect against rust and corrosion
• Formulated to deliver enhanced protection against deposits
• Helps provide better protection during extreme operating conditions

Max Performance Synthetic Power Steering Fluid

While your car, truck, or SUV depends on Firestone Ride-Rite (TM) air springs to deliver in-cabin comfort, confidence, and control, you turn to Firestone Air Command (TM) products to take your experience to the next level. You count on air accessories like the Air Command Heavy-Duty Air Compressor System with Single Analog Gauge. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge makes inflating or deflating your air springs easy with the touch of a button. It provides an on-the-spot air source to your vehicle suspension system, letting you modify your springs to match the load and driving conditions. Firestone Air Command Heavy-Duty Air Compressor System with Single Analog Gauge, in particular, features a handful of distinct advantages. The Air Command Heavy-Duty Air Compressor System with Single Analog Gauge’s easy installation is chief among them, so you can get it hooked up and hop on the road in no time. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for uncluttered routing of power supply and lines.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Heavy-Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 30 Percent Duty Cycle, 0.40 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:

• Controls Two Air Springs Simultaneously
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

• The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
• The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
• Easy Installation

Finish: Zinc Plated Bilstein B8 5100 (Ride Height Adjustable) shock absorbers are designed for trucks and SUV’s with a front coilover style suspension. The monotube shocks feature a 46mm digressive piston with self-adjusting deflective disc valving. Multiple snap-ring grooves in the shock body allow for different spring seat positions, providing 0-2.5 inch of front end lift, depending on application. The Bilstein B8 5100 (Ride Height Adjustable) shock absorber provides increased wheel travel and improved handling and feature a zinc-plated steel body for resistance to harsh off-road elements.

Product Features:

• An extremely affordable and practical alternative to coil spring spacers.
• BILSTEIN’s superior monotube design
• Utilizes the vehicle’s stock front coil springs
• Zinc finish with multi-layer unique BILSTEIN coating for extreme protection
• Self-adjusting deflective disc valving with independent rebound and compression tuning Note: Spring is not included.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Construction and design validated by MOOG engineers
• Replacement helps restore vehicle handling
• Superior rubber to steel bonding for durability
• Engineered to meet or exceed OE requirements
• Provides like-new steering, ease of installation and longer life

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Meets or exceeds OE requirements
• Helps restore vehicle ride.
• Reduces tire wear