2016 Mazda 3 Belts and Hoses

Name: Multi Rib (Serpentine) Belt
Brand: ContiTech
SKU: W1000140828CON
Price: 29.77 USD

Below you will find various in-demand Mazda Belts and Hoses, components and accessories for your 2016 3. Advance Auto Parts has popular 3 parts like Serpentine and V Belts, Radiator Hoses, Belt Tensioners and more. You’ll also find aftermarket and OEM Belts and Hoses for other 3 model years including 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2019, 2020 and more. Select a category of 2016 Mazda 3 Belts and Hoses below and start saving instantly.

Popular 2016 Mazda 3 Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Coolant Hoses

V-Belts

Essential Belts and Hoses for 2016 Mazda 3s

from

$29.77

ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Temperature-stable from -22F to 176F (30C to 80C).
Delivers over 98% power efficiency.
High performance construction.
Polychloroprene rubber cover and body.
Polyester fiber tensile members and a ribbed belt design.

from

$22.29

Hutchinson stretch belts, are specifically designed for 2 to 4 point drives that do not require tensioning. Although these belts may look like standard poly rib belts, they are very different. These specially designed belts have self-tensioning capabilities required by specific original equipment (OE) drives designed for a “stretch” belt. Vehicles that are manufactured with “stretch” belts must replace those belts with “stretch” belts. These belts are not interchangeable with standard constructed belts of the same size. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. “Stretch” belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve. Dismounting and reusing stretch belts is not recommended. A new belt should be installed anytime one is removed.

Product Features:

Wear resistant EPDM rib material
Highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord
Designed to elongate over the fixed pulley system
Provides the proper tension maintenance

from

$34.53

Drive Belt

from

$22.24

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$51.47

The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$54.49

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Temperature-stable from -22F to 176F (30C to 80C).
Delivers over 98% power efficiency.
High performance construction.
Polychloroprene rubber cover and body.
Polyester fiber tensile members and a ribbed belt design.

from

$21.28

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$22.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$23.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$21.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$153.27

Radiator Hose

from

$21.34

MacKay utilizes leading edge rubber technology and compounds, supported by in-house processes from rubber mixing to final product. This ensures hoses are made to the strict specifications required for the advanced motor vehicles of the 21st century. In vehicles of today, a hose has to be designed to withstand the stresses of modern, more compact but powerful engines that run hotter and at a higher pressure. Other factors include smaller engine compartments with poor heat dissipation, aggressive coolant additives, and stray (electrochemical) current that may be conducting through the cooling system. In short, the smaller but more powerful engines of today work a lot harder than the larger engines that were standard before. More heat is generated, higher burst pressures are required in cooling system components, and hoses have to be made tougher to withstand these demands. MacKay’s research and development chemists have developed new rubber formulations and manufacturing processes that ensure MacKay hoses meet the greater wear and heat demands created by modern engines. Rubber compounds used in automotive hoses today are predominantly synthetic rubber formulation. All MacKay coolant hoses are made from EPDM compounds that are highly resistant to ozone attack. Hoses made from some other rubber compounds may be subject to ozone deterioration.

Product Features:

Excellent resistance to high temperatures
Resists chemical attack (oils, fuels etc.)
Excellent Ozone resistance
Good resistance to abrasion
High resistance to vibration

from

$60.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$51.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$195.99

This Litens belt tensioner is supplied by the original equipment (O.E.) tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part . As with the original equipment part, this replacement tensioner meets all performance and life specifications of the O.E. part. This part was designed for Mazda Applications and maintains the O.E. hydraulic strut technology. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Hydraulic Strut Technology for maximum damping.
Durable Thermoplastic Pulley for long service life and performance.
Includes lift-lug feature for ease of installation.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
Belt removal is required to change the tensioner. Therefore, doing both together will extend accessory drive life and lower overall labor versus performing these services separately.
Installation instructions included.

from

$184.99

This Litens belt tensioner is supplied by the original equipment tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this replacement tensioner is manufactured in Canada to meet Mazda’s specifications. The Litens replacement part maintains the heavy duty steel pulley, round spring technology and the specified internal damping components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Durable Steel Pulley for long service life and performance.
Professional Mechanics will change this tensioner in about 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$151.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Meets or exceeds OE quality

from

$197.99

This Litens supplied tensioner is manufactured to original equipment specifications. This tensioner boasts improvements to the OE design, enabling an efficient belt tensioner replacement process by a single technician. This part is specifically designed for Mazda applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. Our line is made up of over 900 ADTs, Pulleys, and OADs. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Heavy duty steel pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included
Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d

from

$102.99

This Litens belt tensioner is supplied by the original equipment tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). The original design experienced performance and noise issues. Therefore, the aftermarket part was redesigned (by the original equipment supplier) to correct the design flaws of the original part. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
High Performance Polymer Pulley
Professional Mechanics will change this tensioner in about 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$59.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Includes installation instructions

from

$32.99

Stretch Fit Drive Systems Demand Highly Engineered Solutions.

Product Features:

Specially formulated adhesive literally locks onto the cord, allowing the cord to elongate and stretch, but never lose tension
Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile cord
Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
NOTE: Stretch Fit belts are single-use only and must be replaced if removed

from

$22.99

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning
Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
Elasticity allows for long-lasting performance and proper tension

from

$31.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$25.99

Designed for two- to four-point drives that do not require automatic or manual tensioning
Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
Elasticity allows for long-lasting performance and proper tension

from

$39.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$34.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$26.99

Stretch Fit Drive Systems Demand Highly Engineered Solutions.

Product Features:

Specially formulated adhesive literally locks onto the cord, allowing the cord to elongate and stretch, but never lose tension
Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile cord
Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
NOTE: Stretch Fit belts are single-use only and must be replaced if removed

from

$22.99

Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:

Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

Upgrade your 2016 Mazda 3 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2016 Mazda 3, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Belts and Hoses are key to keeping your 3 functioning at its best. At Advance Auto Parts, we offer a wide selection of 14 Belts and Hoses for the 2016 Mazda 3, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Radiator Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2016 Mazda 3 at great prices. Our Belts and Hoses inventory for this model ranges from just $10.99 to $195.99, with an average price of $59.95. Our 14 Belts and Hoses in stock come from 5 trusted brands, so you’re sure to find the right part for your 2016 Mazda 3 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2016 Mazda 3, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Litens, Driveworks, and more. Dayco Belts and Hoses start at just $10.99 and boast an impressive 5 stars average rating from customers. Litens and Driveworks also bring quality to the table, with Belts and Hoses available starting at $14.79, and at an average 5 stars rating. With 20 customer reviews and counting, our 2016 Mazda 3 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2016 Mazda 3 is always ready to roll. We’re committed to providing you with everything you need to keep your 3 in top shape, all in one place. Start shopping confidently below for your 2016 Mazda 3!

Best-Selling Serpentine and V Belts for 2016 Mazda 3s

Enhance the driving experience in your Mazda with 10 quality Serpentine and V Belt components, starting at $10.99.

show more show less

from

$31.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$14.79

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$22.99

Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

from

$10.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$42.99

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion & flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning.
Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
Elasticity allows for long-lasting performance and proper tension
Elasticityáallows for long-lasting performance and proper tension

from

$25.99

Designed for two- to four-point drives that do not require automatic or manual tensioning
Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
Elasticity allows for long-lasting performance and proper tension

from

$22.24

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$27.07

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$21.28

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$20.53

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

Top Picks for 2016 Mazda 3 Belt Tensioners

Upgrade Mazda 3s with top-quality Belt Tensioners parts, including 2 OEM and aftermarket selections for your 2016 model.

show more show less

from

$195.99

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Hydraulic Strut Technology for maximum damping.
Durable Thermoplastic Pulley for long service life and performance.
Includes lift-lug feature for ease of installation.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
Belt removal is required to change the tensioner. Therefore, doing both together will extend accessory drive life and lower overall labor versus performing these services separately.
Installation instructions included.

from

$151.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Meets or exceeds OE quality

Top-Rated Belts and Hoses Brands For Your 2016 Mazda 3

Shop for the best-rated brands offering Belts and Hoses and other products for your 2016 Mazda 3s. Below you’ll find some of our best rated Belts and Hoses from Dayco, Litens, and Driveworks, and more. Belts and Hoses from these brands that fit a 2016 3 start at just $10.99 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2016 Mazda 3 Belts and Hoses

When it comes to maintaining or upgrading your 2016 Mazda 3, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2016 Mazda 3. With over 8 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $10.99, with an average price of just $45.24. Plus, with over 4 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$42.99

This product is not rated

Stretch Serpentine Belt; 31.26 Long, 3 Rib Count, Zip Tie Required

“”

from
$10.99

This product is not rated

Poly Rib Belt Serpentine Belt; 38.23 Long, 6 Rib Count

“”

from
$22.99

This product is not rated

Stretch Serpentine Belt: 30.5 "Long, 3 Rib Count, Engineered For High Mileage

“”

Popular Litens 2016 Mazda 3 Belts and Hoses

Litens auto parts is one of the highest quality Belts and Hose brands in the market. Any 2016 Mazda 3 owner should feel confident when installing genuine Litens parts in their vehicle. To ensure the best fit and performance for your 2016 3, Advance Auto Parts carries a full inventory of 1 Litens Belts and Hoses. Plus you will be keeping your Mazda in peak condition while saving money because prices on these Litens Belts and Hoses range up to $195.99, plus, with more than 1 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$195.99

(1)

Accessory Drive Belt Tensioner – Original Equipment Quality

“EXCELENT”

FAQs for 2016 Mazda 3 Belts and Hoses

Which Belts and Hoses are best-sellers for 2016 Mazda 3s?

Out of 14 Belts and Hoses that fit 2016 Mazda 3s, the following parts are the top sellers:

Stretch Serpentine Belt: 30.5 "Long, 3 Rib Count, Engineered For High Mileage (11936560) – $22.99
Poly Rib Belt Serpentine Belt; 38.23 Long, 6 Rib Count (11936689) – $10.99
Accessory Drive Belt Tensioner – Original Equipment Quality (12072567) – $195.99

What’s the price range for 2016 Mazda 3 Belts and Hoses?

Belts and Hose prices for the 2016 Mazda 3 start at $10.99 and go up to $195.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2016 Mazda 3?

The average price for Belts and Hoses for the 2016 Mazda 3 is $59.95. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Mazda 3 model years?

Yes, we currently carry Belts and Hoses for 14 model years of Mazda 3s between 2004 and 2020. Belts and Hoses are bought most frequently for the following model years: 2020, 2019, 2015, 2014, 2013, 2012, 2011, 2010, and 2009.

What are the cheapest Belts and Hoses for my 2016 Mazda 3?

The cheapest 2016 Mazda 3 Belts and Hoses we carry in stock are:

Poly Rib Belt Serpentine Belt; 38.23 Long, 6 Rib Count (11936689) – $10.99
Poly Rib Belt Serpentine Belt; 38 Long, 6 Rib Count (5065372) – $14.79
Drive V-Belt (11916234) – $20.53
Drive V-Belt (11492562) – $21.28
Drive V-Belt (11815137) – $22.24

What are the top-rated Belts and Hoses that fit the 2016 Mazda 3?

Out of 20 reviews by customers, our 2016 Mazda 3 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2016 Mazda 3 and their top-rated products:

Serpentine and V Belts
- Poly Rib Belt Serpentine Belt; 38 Long, 6 Rib Count (5065372) – $14.79
- Poly Rib Belt Serpentine Belt; 38 Long, 6 Rib Count (3290097) – $31.99
Belt Tensioners
- Poly Rib Belt Serpentine Belt; 38 Long, 6 Rib Count (5065372) – $14.79
- Poly Rib Belt Serpentine Belt; 38 Long, 6 Rib Count (3290097) – $31.99

What types of Belts and Hoses do you sell for my 2016 Mazda 3?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2016 Mazda 3:

Can I get help with 2016 Mazda 3 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Belts and Hoses and more.

What is your return policy for Mazda 3 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Mazda 3 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2016 Mazda 3 Belts and Hoses

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000140828CON)

Hutchinson – Stretch Poly Rib Serpentine Belt (Part No.W1000467496HUT)

Hutchinson – Drive Belt (Part No.W1000459595HUT)

Mitsuboshi – Drive V-Belt (Part No.W1000533093MBL)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W1000390095MBL)

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100090500CON)

Mitsuboshi – Drive V-Belt (Part No.W1000655119MBL)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.5" Long, 1.25" Diameter (Part No.E72900)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, .75" Diameter (Part No.C70023)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 9" Long, 1.19" Diameter (Part No.B72409)

Gates – Radiator Hose (Part No.G20001065742GAT)

MacKay – MacKay Radiator Hose (Part No.G2000457709MKY)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7" Long, 1.31" Diameter (Part No.B72102)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25.5" Long, 1.25" Diameter (Part No.E72880)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999630A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999186A)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD Cast Aluminum Case, Meets Or Exceeds OE (Part No.89710)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999420A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999228A)

Dayco – Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts (Part No.89372)

Gates – Stretch Fit« Micro-V« Serpentine Drive Belt (Part No.K050264SF)

Dayco – Stretch Serpentine Belt; 28.03 Long, 5 Rib Count, Zip Tie Required (Part No.5PK712EE)

Dayco – Poly Rib Belt Serpentine Belt; 38 Long, 6 Rib Count (Part No.5060380)

Dayco – Stretch Serpentine Belt; 32.05 Long, 3 Rib Count, Zip Tie Required (Part No.3PK814EE)

Driveworks – Poly Rib Belt Serpentine Belt; 91 Long, 6 Rib Count (Part No.910K6)

Dayco – Poly Rib Belt Serpentine Belt; 51.5 Long, 6 Rib Count (Part No.5060515)

Gates – Stretch Fit« Micro-V« Serpentine Drive Belt (Part No.K050272SF)

Dayco – Stretch Serpentine Belt: 30.5 "Long, 3 Rib Count, Engineered For High Mileage (Part No.E030305)

Dayco – Poly Rib Belt Serpentine Belt; 38 Long, 6 Rib Count (Part No.5060380)

Driveworks – Poly Rib Belt Serpentine Belt; 38 Long, 6 Rib Count (Part No.380K6)

Dayco – Stretch Serpentine Belt: 30.5 "Long, 3 Rib Count, Engineered For High Mileage (Part No.E030305)

Dayco – Poly Rib Belt Serpentine Belt; 38.23 Long, 6 Rib Count (Part No.5060382)

Dayco – Stretch Serpentine Belt; 31.26 Long, 3 Rib Count, Zip Tie Required (Part No.3PK794EE)

Dayco – Stretch Serpentine Belt; 32.05 Long, 3 Rib Count, Zip Tie Required (Part No.3PK814EE)

Mitsuboshi – Drive V-Belt (Part No.W1000533093MBL)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W1000106014MBL)

Mitsuboshi – Drive V-Belt (Part No.W1000655119MBL)

Mitsuboshi – Drive V-Belt (Part No.W10001324534MBL)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25.5" Long, 1.25" Diameter (Part No.E72880)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.5" Long, 1.25" Diameter (Part No.E72900)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999630A)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD Cast Aluminum Case, Meets Or Exceeds OE (Part No.89710)