2016 Jeep Wrangler Bumpers
More 2016 Jeep Wrangler Bumpers
Find your specific 2016 Jeep Wrangler original or aftermarket Bumpers below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2016 Jeep Wrangler Bumpers
Rugged Ridge – 3.5-Inch Bull Bar; B (Part No.11564.03)
from
$517.99
3.5-Inch Bull Bar; B
Rugged Ridge – Rear Bumper Guard; B (Part No.11513.03)
from
$509.99
Rear Bumper Guard; B
Rugged Ridge – Front Bumper (Part No.11561.03)
from
$561.99
Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included). For winch mounting plate
Product Features:
See More
Product Features:
- Textured Black
- With Raiser and Winch Cut Out
- Welded End Caps
- Limited 5 Year Warranty
Westin – WJ2 Full Width Front Bumper w/LED Light Bar Mount (Part No.59-80055)
from
$996.99
Westins WJ2 Bumper is constructed with high-strength 3/16-inch plate steel. Our WJ2 Bumper improves ground and tire clearance while offering corner light mount points and rock light mount points, plus 2 side and 2 front off-road jack points. Your winch fits down inside the bumper to allow maximum air flow to your vehicles radiator and the WJ2 Bumper includes pre-drilled holes to allow installation of a winch while the bumper is already installed on your Jeep – most other brands wont! Features recovery hooks with a recovery shackle mounting point to allow easy tow strap attachment. Bolt-on installation so no drilling is required. Recommended optional skid plate sold separately. Includes bumper, mounting hardware and install instructions.
Product Features:
See More
Product Features:
- Rock Light Mount Points
- Bolt On Installation; No Drill Required
- Integrated Recovery Shackle Mount Points
- Includes Bumper; Mounting Hardware And Install Instructions
- Designed To Work With Factory Or Westin Hitches
- Auxiliary Light Mount Points
- 2 Off-Road Jack Points
- 0.1875 in. Plate Steel Construction
Rugged Ridge – Xtreme Heavy Duty; Bumper Over Rider (Part No.11541.14)
from
$273.99
This textured black over-rider hoop from Rugged Ridge features 2.3 inch tubing and simply bolts to the XHD aluminum front bumpers. Its modular design will give your JK a whole new look to make your bumper stand out. Designed to be a whole new look while b
Product Features:
See More
Product Features:
- Textured Black
- 2.3 in. Tube
- Modular Design
- Bolt-on
- Limited 5 Year Warranty
KAI – Passenger Side Rear Bumper End (Part No.CH1105140)
from
$29.99
New Standard Replacement Passenger Side Rear Bumper End
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Rugged Ridge – D-Ring (Part No.11235.01)
from
$53.99
This pair of galvanized 3/4-inch D-shackles from Rugged Ridge is rated to 9,500 lbs. and provides everything you’ll need for recovering stuck Jeeps. Featuring a strong and sturdy construction, their natural high quality stainless steel finish gives them a
Product Features:
See More
Product Features:
- Silver with Red Pin
- 9500Lb Pull Capacity
- Galvanized Steel
- Pair
- 3/4 in.
Rugged Ridge – LED Light Mount Brackets (Part No.11232.23)
from
$70.99
If you want to update your factory fog lights to brighter and more energy efficient LED lights, you’ll need the proper mounting brackets. This pair of LED light mounting brackets from Rugged Ridge has a 3.5 inch circular hole that allows you to mount 3.5-
Product Features:
See More
Product Features:
- Durable Black Powder Coat
- Mount 3.5 in. Round LED Lights Into Your Fog Light Locations
- Easy Bolt-on Installation
- Works w/ Rugged Ridge; OE and many other bumpers
TrailFX – Jeep Bumper, 2 In Rec Hitch, Two 3 In Sq. Light CO, Textured Black, no spare tire carrier (Part No.J034T)
from
$869.99
When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyones needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.
Product Features:
See More
Product Features:
- Tough And Durable
- Rugged, Fully Welded Design For Extra Strength
- Limited 3 Year Warranty
TrailFX – One Piece Design, Direct-Fit, Mounting Hardware Included, Textured Black, Steel (Part No.JL03T)
from
$1169.99
When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.
Product Features:
See More
Product Features:
- Textured Black Powder Coat
- Wrap Around Corners To Protect The Jeep Body
- 3 Inch Cube Flush Mount Light Opening For Reverse Lighting (Lights Not Included)
- D-Ring Mounts And 2-3/4 Ton D-Rings Included
- 2 Inch Receiver Welded In Place To Vehicle Towing
- Spare Tire Carrier Mounts To Bumper And Tailgate For Support Up To 125 Pounds STC Moves Freely With Opening Of Rear Tailgate Door
Rugged Ridge – Rear Tube Bumper (Part No.11570.03)
from
$196.99
All Rugged Ridge bumpers feature smooth ground welds for an unbelievable look and further rust protection. No other tubular bumper manufacturer goes to the expense of smooth grinding their welds. This exclusive smooth grind process virtually eliminates sm
Product Features:
See More
Product Features:
- Gloss Black
- Allows Oversized Spare Tire
- Welded End Caps
- Limited 5 Year Warranty
Dorman – Rivet-Screw In-Hole Diameter .250 In-Head Diameter .610 In-Length .9 In (sold by each) (Part No.700-864)
from
$2.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – GM Bumper Retainer (Part No.963-202D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – GM Plastic Blind Rivet – Diameter 35/64 In. (Part No.963-201D)
from
$4.49
Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.
Product Features:
See More
Product Features:
- Available in blind, push-in and screw-in styles
- Constructed of high-quality materials for long-lasting durability
- Also suitable for a broad variety of industrial and commercial uses
- Packaged in a variety of piece counts for use with both small and large projects
KAI – Bumper Cover Reinforcement (Part No.CH1006212DSC)
from
$404.99
New CAPA Certified Premium Replacement Front Bumper Cover Reinforcement Bar
Product Features:
See More
Product Features:
- Made Of High Strength Steel
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Front Bumper To Body Filler Panel, Plastic Upper Cover (Part No.CH1087124)
from
$79.99
New Standard Replacement Front Bumper To Body Filler Panel, Plastic [Upper Cover]
Product Features:
See More
Product Features:
- Plastic [Upper Cover], Made Of Polypropylene
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Rugged Ridge – Front Tube Bumper (Part No.11561.01)
from
$379.99
Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Each front bumper has two welded light tabs for easy mounting of offroad lighting.
Product Features:
See More
Product Features:
- Textured Black
- With Raiser
- Welded End Caps
- Limited 5 Year Warranty
Rugged Ridge – Xtreme Heavy Duty; RRC Mount Tube Bumper (Part No.11540.18)
from
$823.99
Looking to add some versatility and style to your Wrangler? Well the XHD Modular Bumper is calling your name! No other bumper can give your Jeep this many looks. Featuring a modular design, these bumpers provide dozens of different appearances and styles
Product Features:
See More
Product Features:
- Textured Black
- 2.5 in. Tubing
- Modular Design
- Bolt-on
- Limited 5 Year Warranty
Rugged Ridge – Front Tube Bumper (Part No.11563.10)
from
$751.99
Rugged Ridge Bumpers have been engineered to the industries most exacting specifications. All powder coated Rugged Ridge bumper products are E-coated to ensure a no rust finish. Rugged Ridge Bumpers can take small rock chips and still maintain their rust
Product Features:
See More
Product Features:
- Stainless Steel
- With Raiser
- Welded End Caps
- Limited 5 Year Warranty
Rugged Ridge – Xtreme Heavy Duty Front Bumper (Part No.11540.10)
from
$597.99
Looking to add some versatility and style to your Wrangler? No other bumper can give your Jeep this many looks. Featuring a modular design, these bumpers provide dozens of different appearances and styles so you can build the exact bumper of your choice!
Product Features:
See More
Product Features:
- Textured Black
- Aluminum
- Modular Design
- Winch Plate
Rugged Ridge – Classic Rock Crawling Front Bumper (Part No.11502.20)
from
$296.99
Looking for an economical yet tough bumper for those weekend adventures? Classic Rock Crawling bumper series give you protection an understated at an affordable price. All Classic Rock Crawler Bumpers are constructed coat painted steel with formed ends fo
Product Features:
See More
Product Features:
- Black
- Steel
- Low Profile
- Formed Ends
Rugged Ridge – Front Bumper (Part No.11560.03)
from
$586.99
Front bumpers feature an enlarged opening for greater air flow and a clean offroad look. Need to mount a winch on your Jeep? This front tube bumper features a special cut-out for winch mounting (winch mounting plate not included). For winch mounting plate
Product Features:
See More
Product Features:
- Gloss Black
- With Raiser and Winch Cut Out
- Welded End Caps
- Limited 5 Year Warranty
Rugged Ridge – Xtreme Heavy Duty Front Bumper (Part No.11540.40)
from
$715.99
No other bumper can give your Jeep this many looks! The most versatile bumper system ever created, the XHD Modular Bumper System provides dozens of different looks and styles so you can customize your bumper the way you like it. This black powder-coated c
Product Features:
See More
Product Features:
- Textured Black
- Aluminum
- Modular Design
- Winch Plate
Rugged Ridge – Front Tube Bumper (Part No.11561.10)
from
$529.99
Rugged Ridge Bumpers have been engineered to the industries most exacting specifications. All powder coated Rugged Ridge bumper products are E-coated to ensure a no rust finish. Rugged Ridge Bumpers can take small rock chips and still maintain their rust
Product Features:
See More
Product Features:
- Textured Black
- With Raiser
- Welded End Caps
- Limited 5 Year Warranty
Popular 2016 Jeep Wrangler Bumpers Categories
2016 Jeep Wrangler Bumpers
Maybe you’re in the middle of a full rebuild of that 2016 Jeep Wrangler. Maybe you just need a couple of Bumpers. Either way, Advance Auto Parts has 38 different Bumpers in our inventory ranging from $2.29 to $996.99. That means you can find the exact parts or products you need to keep that 2016 Jeep Wrangler running smoothly.
Bumpers are only as good as their brand. We stock 7 different brands to make sure you have plenty of trusted parts to choose from for your 2016 Jeep Wrangler. Dorman, KAI, and Rugged Ridge are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Bumpers for your 2016 Jeep Wrangler, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 15 reviews in this category, some of the top rated parts include D-Ring with 1.0 stars.
So if you’re in the market for aftermarket Bumpers to keep your 2016 Jeep Wrangler rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Bumpers Brands To Make Your 2016 Jeep Wrangler Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2016 Jeep Wrangler demands trusted brand parts and products to keep it running. Many trusted brands of Bumpers make up Advance Auto Parts’ inventory, and all are ready to help make your Wrangler the best it can be. Be sure to browse some of our top Bumpers brands and parts.
Popular Dorman Bumpers
We carry Dorman parts in our stock across Bumper Pad Retainer Strips categories, plus more. For a 2016 Jeep Wrangler, our most popular Dorman Bumpers include:
FAQs for 2016 Jeep Wrangler Bumpers
What are the most purchased Bumpers for the 2016 Jeep Wrangler?
Out of 38 Bumpers for the 2016 Jeep Wrangler, the most popular in our inventory are:
from
$2.29
This product is not rated
Rivet-Screw In-Hole Diameter .250 In-Head Diameter .610 In-Length .9 In (sold by each)
Tailgate Stop Bumper Retainer
from
$79.99
This product is not rated
Front Bumper To Body Filler Panel, Plastic Upper Cover
Bumper to Body Filler Panels
What are the top-rated 2016 Jeep Wrangler Bumpers?
Top-rated Bumpers for your 2016 Jeep Wrangler based on customer reviews/ratings are:
from
$53.99
(1)
D-Ring
“These D-rings are cast in a manner that is inconsistent with industry standard, the opening is too narrow to use with most standard D-ring anchor poin”
