2016 Jeep Grand Cherokee Vehicle Hoods

New Standard Replacement Passenger Side Hood Hinge, Hood Half, Requires Body Half For Complete Hinge

Product Features:

• Hood Half, Requires Body Half For Complete Hinge, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Hood Hinge, Body Half, Requires Hood Half For Complete Hinge

Product Features:

• Body Half, Requires Hood Half For Complete Hinge, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Hood Hinge, Body Half, Requires Hood Half For Complete Hinge

Product Features:

• Body Half, Requires Hood Half For Complete Hinge, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Hood Hinge, Hood Half, Requires Body Half For Complete Hinge

Product Features:

• Hood Half, Requires Body Half For Complete Hinge, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications Comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

• Leading Manufacturer Of Quality Replacement Parts For Jeep
• Meets Standards For Quality
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy Installation

Restore and maintain the quick, easy opening of your hood with Dorman’s Hood Release Cable. Constructed of high-quality stainless steel, it naturally resists corrosion. Plus, it’s engineered to counteract the wear and tear that can lead to snapping and sticking.

Product Features:

• Comes with handle (where applicable)
• Direct replacement for a proper fit every time
• Durably designed to resist breakage
• Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:

• Direct replacement – this hood release cable is made to match the original cable on specific vehicles
• Durable construction -manufactured within strict tolerances for reliable longevity
• Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
• Trustworthy value – backed by team of engineers and quality control experts in the United States

Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:

• Direct replacement – this hood release cable is made to match the original cable on specific vehicles
• Durable construction -manufactured within strict tolerances for reliable longevity
• Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
• Trustworthy value – backed by team of engineers and quality control experts in the United States

Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:

• Direct replacement – this hood release cable is made to match the original cable on specific vehicles
• Durable construction -manufactured within strict tolerances for reliable longevity
• Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
• Trustworthy value – backed by team of engineers and quality control experts in the United States

Restore and maintain the quick, easy opening of your hood with Dorman’s Hood Release Cable. Constructed of high-quality stainless steel, it naturally resists corrosion. Plus, it’s engineered to counteract the wear and tear that can lead to snapping and sticking.

Product Features:

• Comes with handle (where applicable)
• Direct replacement for a proper fit every time
• Durably designed to resist breakage
• Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:

• Direct replacement – this hood release cable is made to match the original cable on specific vehicles
• Durable construction -manufactured within strict tolerances for reliable longevity
• Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
• Trustworthy value – backed by team of engineers and quality control experts in the United States

New Standard Replacement Hood Panel, Made Of Aluminum, All Models Except SRT-8

Product Features:

• Made Of Aluminum, All Models Except SRT-8, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Premium Replacement Hood Panel, Made Of Aluminum

Product Features:

• Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

• Exact fit original equipment design guarantees correct fit and function
• Engineered and built to meet or exceed original equipment quality standards
• Individually tested for performance and reliability
• Hardened, nitride plated steel shaft provides optimal durability
• Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
• Heavy gauge steel body is electrostatically painted and heat cured to OE specs
• Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
• Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
• No special installation tools required

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

• Exact fit original equipment design guarantees correct fit and function
• Engineered and built to meet or exceed original equipment quality standards
• Individually tested for performance and reliability
• Hardened, nitride plated steel shaft provides optimal durability
• Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
• Heavy gauge steel body is electrostatically painted and heat cured to OE specs
• Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
• Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
• No special installation tools required
• Consistent Performance In All Weather Conditions
• Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
• Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

• Restores the original opening and closing speeds of your hood, hatch or trunk
• Easy-to-install
• No special tools required
• Engineered for your application
• Easy lifting and reduced closing effort
• Consistent lifting force through 50,000 cycles
• Rust-resistant piston rod extends product life
• Dynamic damping technology, available on select lift supports

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1993-1998 Grand Cherokee, Liftgate Support Strut (Shock), Right

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

• Restores the original opening and closing speeds of your hood, hatch or trunk
• Easy-to-install
• No special tools required
• Engineered for your application
• Easy lifting and reduced closing effort
• Consistent lifting force through 50,000 cycles
• Rust-resistant piston rod extends product life
• Dynamic damping technology, available on select lift supports

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1996-1998 Grand Cherokee, Liftgate Glass Support Strut (Shock), LH or RH

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 2008-2010 Grand Cherokee, Lift gate Glass Support Strut (Shock) LH or RH
• 2005-2010 Grand Cherokee, Liftgate Support Strut (Shock) LH or RH

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

• Heavy Gauge Steel Body
• Self-Cleaning Piston Assembly
• Rubber O-Ring Piston Seal

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

• Exact fit original equipment design guarantees correct fit and function
• Engineered and built to meet or exceed original equipment quality standards
• Individually tested for performance and reliability
• Hardened, nitride plated steel shaft provides optimal durability
• Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
• Heavy gauge steel body is electrostatically painted and heat cured to OE specs
• Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
• Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
• No special installation tools required