2016 Ford F-150 Engine Cold Air Intakes
If you’ve upgraded your 2016 Ford F-150 with a cold air intake, congrats on giving your engine a breath of fresh air! To keep it performing at its best, regular maintenance is key. Check for signs of dirt or debris build-up on the filter, which can restrict airflow and reduce efficiency. A good rule of thumb is to clean or replace the filter every 12,000 to 15,000 miles, depending on your driving conditions. Keep an eye out for common symptoms of failure, such as a decrease in acceleration, rough idling, or even a check engine light—these can all indicate that your cold air intake needs some attention. By staying on top of maintenance, you’ll ensure your F-150 stays responsive and powerful on the road!
Essential Engine Cold Air Intake Maintenance for Your 2016 Ford F-150
If you’re driving a 2016 Ford F-150 and looking to boost your truck’s performance, upgrading to a cold air intake is one of the best moves you can make. Not only do these aftermarket parts enhance airflow to your engine, which can lead to increased horsepower and improved fuel efficiency, they also give your ride a more aggressive sound that’ll turn heads on the road. At Advance Auto Parts, we understand the importance of using quality components from trusted brands, so you can shop with confidence knowing you’re getting the best for your F-150. Whether you’re performing routine maintenance or taking on an upgrade, our extensive selection ensures you find the right cold air intake that meets your needs while keeping your ride running smoothly. So gear up, because an upgrade is just a click away!
Cost of Engine Cold Air Intakes for Your 2016 Ford F-150
At Advance Auto Parts, we’ve got an impressive lineup of Engine Cold Air Intakes to boost your vehicle’s performance without breaking the bank. With prices ranging from $199.99 to $739.99, there’s something for every budget – whether you’re looking to enhance your ride’s horsepower or just want a cooler sound under the hood. On average, you can expect to spend around $420.56, striking a solid balance between quality and affordability. We carry trusted brands known for their reliability and performance, ensuring that your DIY installation yields the results you’re looking for. Ready to give your engine some fresh air? Check out our selection today!
Complete Your 2016 Ford F-150 Engine Cold Air Intake Job with the Right Tools and Parts
When you’re diving into the world of Engine Cold Air Intakes, you might want to have a few essential products and tools on hand to ensure a smooth process and optimal performance. Consider grabbing some high-quality air filters to maintain airflow and efficiency, as well as a good cleaner for those filters to keep them in top shape. A set of screwdrivers and wrenches in various sizes will help with the removal and installation of the intake, and a torque wrench is a must to ensure your bolts are tightened to the manufacturer’s specifications. Don’t forget about safety! Always wear gloves and safety glasses to protect your hands and eyes from dirt and debris, and make sure your vehicle is securely lifted if you need to get underneath it. Keeping your workspace clean and organized can also go a long way in preventing any mishaps while you’re enhancing your engine’s performance.
Engine Cold Air Intakes for Your 2016 Ford F-150
K&N – Cold Air Intake: Adds Up To 19 Horsepower, With Washable Air Filter (Part No.63-2593)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Washable Air Filter (Part No.63-2591)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 13 Horsepower, With Washable Air Filter (Part No.77-2591KP)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Washable Air Filter (Part No.57-2591)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Washable Air Filter (Part No.63-2596)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter (Part No.71-2591)
from
$524.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Powder-coated aluminum intake tube paired with dry synthetic air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 50,000 miles under normal highway driving conditions
- Typical installation can be completed in 90 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- HIGH QUALITY: Made in America.
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9033)
from
$215.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with stainless steel clamps, velocity stack, couplers, and all necessary hardware for an OE fit and finish. Both PCV and vent hose mounts directly in the intake tube.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 19 Horsepower, With Washable Air Filter (Part No.57-2593)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 23 Horsepower, With Washable Air Filter (Part No.63-2592)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9034)
from
$208.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
aFe POWER – Momentum XP Cold Air Intake: Gain up to 15 Horsepower! Dry Air Filter For Easy Maintenance (Part No.50-30024DL)
from
$734.99
One-Piece Housing with Sight Window:A custom computer designed housing eliminates the use of multiple components. Its roto-molded and made from heat soak resistant cross-linked polyethylene, ensuring the coolest air intake charge possible. A clear sight window allows for filter inspection without removal of the airbox. The housing is designed to retain the same stock mounting points as the OE intake system for a hassle-free installation.Dual Inlet Large 3-Layer Performance Air Filter:This sealed intake system utilizes a radial flow performance air filter with three oil-free progressive synthetic media layers for maximum convenience. The unique filter-to-housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process.Dual 3″ Mandrel-Bent Tubes w/ Custom Silicone Coupling:Dual mandrel-bent powder-coated blue aluminum intake tubes direct unrestricted airflow from the filter to the throttle body for more horsepower and torque. A custom reinforced silicone coupling merges the dual tubes into a single outlet to connect to the throttle body.Premium Hardware:Premium stainless-steel worm-gear clamps provide the best corrosion resistance possible. Momentum XP intakes are designed with fewer parts for a quick and simple installation.
Product Features:
See More
Product Features:
- Dyno-Proven Gains up to +15 HP and +14 lbs. x ft. TQ
- Outflows Factory Intake by 38%
- Enjoy Lifelong Convenience with a Washable and Reusable Pro DRY S Air Filter
- One-Piece Roto-Molded Housing Captures Air Directly from the Front of the Truck
aFe POWER – Momentum XP Cold Air Intake: Gain up to 20 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.50-30024R)
from
$593.99
One-Piece Housing with Sight Window:A custom computer designed housing eliminates the use of multiple components. Its roto-molded and made from heat soak resistant cross-linked polyethylene, ensuring the coolest air intake charge possible. A clear sight window allows for filter inspection without removal of the airbox. The housing is designed to retain the same stock mounting points as the OE intake system for a hassle-free installation.Dual Inlet Large 5-Layer Performance Air Filter:This sealed intake system utilizes a radial flow performance air filter with five pre-oiled progressive cotton gauze media layers for maximum performance. The unique filter-to-housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process.Dual 3″ Mandrel-Bent Tubes w/ Custom Silicone Coupling:Dual mandrel-bent wrinkle-black powder-coated aluminum intake tubes direct unrestricted airflow from the filter to the throttle body for more horsepower and torque. A custom reinforced silicone coupling merges the dual tubes into a single outlet to connect to the throttle body.Premium Hardware:Premium stainless-steel worm-gear clamps provide the best corrosion resistance possible. Momentum XP intakes are designed with fewer parts for a quick and simple installation.
Product Features:
See More
Product Features:
- Dyno-Proven Gains up to +20 HP and +18 lbs. x ft. TQ
- Outflows Factory Intake by 41%
- Enjoy Lifelong Performance with a Washable and Reusable Pro 5R Air Filter
- One-Piece Roto-Molded Housing Captures Air Directly from the Front of the Truck
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 5 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-22642-B)
from
$479.99
Dual Large 5-Layer Performance Air Filters: This sealed intake system utilizes pre-oiled, large 7″ tall radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Top Mounted Heat Shield Design: aFe developed this sturdy 18 gauge steel wrinkle-black powder-coated heat shield to snap onto the top of the lower half of the factory airbox to provide a hassle-free installation utilizing factory mounting locations. Large Dual 3″ Intake Tubes: Dual Mandrel-bent Wrinkle-black Powder-coated aluminum intake tubes are designed with an H-pipe to balance intake tubes. Hassle-Free Installation: All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.
Product Features:
See More
Product Features:
- Balanced Intake Tube Pressures
- Maximizes Air Flow and Velocity
- Powder coated One Piece Steel Housing
- Dual Pro 5R Pre-Oil Air Filters
K&N – Cold Air Intake: Adds Up To 17 Horsepower, With Washable Air Filter (Part No.30-2617KC)
from
$472.99
The K&N DRYFLOW Air Intake System replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The DRYFLOW Air Intake System features an oil-free synthetic filter media providing increased airflow and exceptional engine protection without requiring oil. This allows cooler, denser air to be directed through a custom intake tube into the engine’s throttle body for a guaranteed power gain. The system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Designed to improve throttle response and engine sound
- Replaces entire factory air intake system
- Filter only requires cleaning every 50,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- K&N No-Hassle Limited Warranty
- Will not void vehicle warranty
K&N – Cold Air Intake: Adds Up To 21 Horsepower, With Washable Air Filter (Part No.77-2617KC)
from
$472.99
K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your F150 or Raptor truck and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable Powerflow Cotton Air Filter for ultimate airflow. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty and will not void your factory warranty. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine.
- DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system.
- IMPROVED ENGINE SOUND – HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed.
- BETTER TOWING: K&N Air intake kit improves acceleration and uphill performance when towing by improving throttle response, overall horsepower and torque. Excellent for daily and highway driving.
- PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Lifetime Limited Warranty protects for the life of your vehicle.
- HIGH-FLOW REUSABLE AIR FILTER: 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles under normal highway drivin
- EASY TO INSTALL: Includes detailed, step-by-step instructions & all necessary parts- the entire air intake system can typically be installed in less than 60 minutes with basic hand tools.
- MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.
K&N – NextGen Cold Air Intake: Adds Up To 15.2 Horsepower, With Washable Air Filter (Part No.50-2591)
from
$425.99
This K&N NextGen cold air intake system is engineered for Ford F150 V8 5.0L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 46.24% to your engine and provides an increase of 15.22 horsepower and 20.37 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Dyno-Proven Performance: Dyno-proven to deliver a guaranteed increase in horsepower and torque on your engine’s stock tune. Experience the exciting roar of your engine during acceleration, without any drone at cruising speeds.
- NextGen Airbox: The hybrid airbox features a semi-enclosed airbox that helps lower air temperatures, an enlarged fresh air inlet for improved airflow, and better protection against contaminants.
- Oversized Air Filter: An oversized air filter features an increased surface area and a radius-entry design, both engineered to increase airflow and enhance performance.
- Large-Diameter Tube: The large-diameter, CAD-designed intake tube features strategically positioned air channels that increase airflow, boosting airspeed and delivering more air to your engine for added performance.
- Precision Engineering: Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.
- Simplified Installation: The simplified design reduces mounting hardware, while Quick-Lock technology allows the filter to snap into place. A sealing bead secures the system with just one hose clamp.
- 50+ Years of Trusted Protection: Since 1969, K&N filters have delivered superior filtration, extended cleaning intervals, and proven performance, trusted by racers and enthusiasts alike.
- Warranty: K&N NextGen intakes come with a No-Hassle Limited Warranty, preserving your factory warranty. Designed and engineered in the USA since 1969, K&N provides dedicated, USA-based customer service.
aFe POWER – Momentum GT Cold Air Intake: Gain up to 11 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-73114)
from
$419.99
Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.
Product Features:
See More
Product Features:
- 1-Piece Housing
- 5 Layer Performance Air Filter
- Premium Hardware
AEM Induction – Cold Air Intake System (Part No.21-8128DC)
from
$419.99
The AEM 21-8128DC Performance Cold Air Intake System produces horsepower And torque gains by replacing your vehicle’s restrictive factory air filter And air intake housing. This air intake system was designed, tuned And dyno-tested to fit specific Ford F150 EcoBoost models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration And performance. The air filter is located in the original air box space And is protected by a heat shield which is designed to reduce intake air temperature And increase horsepower. The air intake tubes are constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the intake air temperature sensor. The dual intake AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools And it is backed by AEM’s Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the 21-8128DC vehicle applications to determine the legal status for each vehicle.
See More
Flowmaster Inc. – Cold Air Intake (Part No.615147)
from
$392.12
Cold Air Intake
K&N – Cold Air Intake: Adds Up To 23 Horsepower, With Washable Air Filter (Part No.57-2592)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Washable Air Filter (Part No.57-2596)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (Part No.30-2591)
from
$367.99
The K&N DRYFLOW Air Intake System replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The DRYFLOW Air Intake System features an oil-free synthetic filter media providing increased airflow and exceptional engine protection without requiring oil. This allows cooler, denser air to be directed through a custom intake tube into the engine’s throttle body for a guaranteed power gain. The system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Designed to improve throttle response and engine sound
- Replaces entire factory air intake system
- Filter only requires cleaning every 50,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- K&N No-Hassle Limited Warranty
- Will not void vehicle warranty
Flowmaster Inc. – Cold Air Intake (Part No.615136)
from
$347.67
Cold Air Intake
Airaid – Junior Air Intake System (Part No.401-793)
from
$262.99
The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube And the paper filter, in order to help boost horsepower And mileage. This air intake system offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter And an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten And improve clean air flow to the engine for added throttle response And increased horsepower And torque. Each kit is custom made to fit specific vehicles And is easy to install And requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable And fully backed by the AIRAID No-Hassle limited lifetime warranty. Some AIRAID air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the product’s vehicle applications to determine the legal status for each vehicle.
See More
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9048)
from
$225.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
- Product might not be available in all states due to local laws.
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.90330K)
from
$213.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a black washable, reusable low restriction Spectre air filter, black powder coated aluminum intake tube and a black powder coated steel heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with the necessary rubber boots, velocity stack, stainless steel clamps and all necessary hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
- Product might not be available in all states due to local laws.
FAQs for 2016 Ford F-150 Engine Cold Air Intakes
Which Engine Cold Air Intakes are the top sellers for the 2016 Ford F-150?
Out of 26 Engine Cold Air Intakes that fit 2016 Ford F-150s, the following parts are the top sellers:
from
$367.99
(5)
Cold Air Intake: Adds Up To 19 Horsepower, With Washable Air Filter
Engine Cold Air Intakes
from
$367.99
(5)
Cold Air Intake: Adds Up To 12 Horsepower, With Washable Air Filter
Engine Cold Air Intakes
from
$215.99
This product is not rated
Cold Air Intake Kit Engineered to Add Horsepower & Torque
Engine Cold Air Intakes
How can I make sure that a part will be compatible with my 2016 Ford F-150?
Our Ford F-150 aftermarket and OEM parts are designed specifically for the 2016 model. You can always find your specific fitment and compatibility for your 2016 Ford on an individual product page.
What is the price range for 2016 Ford F-150 Engine Cold Air Intakes?
The range of prices of Engine Cold Air Intakes for the 2016 Ford F-150 goes from $208.99 up to $734.99 for the most premium parts.
What is the average price of 2016 Ford F-150 Engine Cold Air Intakes?
2016 Ford F-150 Engine Cold Air Intakes average $398.18 for our selection of OEM and aftermarket parts.
Does Advance Auto Parts sell Engine Cold Air Intakes for other Ford F-150 model years?
Which Engine Cold Air Intakes are highest rated for the 2016 Ford F-150?
Based on 83 customer reviews, our 2016 Ford F-150 Engine Cold Air Intakes have an average rating of 4. Explore our top-rated Engine Cold Air Intakes here:
from
$472.99
(1)
Cold Air Intake: Adds Up To 13 Horsepower, With Washable Air Filter
“Directions were easy to follow and install took about 15 min.”
from
$367.99
(1)
Cold Air Intake: Adds Up To 12 Horsepower, With Washable Air Filter
“1 Star Review”
from
$524.99
(1)
Cold Air Intake: Adds Up To 11 Horsepower, With Washable Air Filter
“Tube was dented”
Can I get help with 2016 Ford F-150 Engine Cold Air Intakes orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Engine Cold Air Intakes and more.
What is your return policy for Ford F-150 Engine Cold Air Intakes?
Advance Auto Parts keeps returns simple. For new Ford F-150 Engine Cold Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
Engine Cold Air Intakes For Other Ford F-150 Model Years
Looking for parts for a different model year of the Ford F-150? Below, you’ll find links to Engine Cold Air Intakes for a range of model years, from 1998 models all the way up to 2026. At Advance Auto Parts, we carry high-quality OEM and aftermarket auto parts for popular years like 2014, 2015, 2017, 2018, 2019, 2020, 2021, 2022, 2023, and more, ensuring you have access to the best options for your specific needs. Choosing an Engine Cold Air Intakes from Advance Auto Parts means investing in top-tier parts that will keep your Ford F-150 running at its best, no matter the year.
