2016 Ford E-350 Super Duty Remanufactured Automatic Transmissions
If you own a 2016 Ford E-350 Super Duty and are considering a remanufactured automatic transmission, it’s important to keep it in top shape to avoid unwanted headaches down the road. Maintenance is key—regularly check your transmission fluid levels, ensuring they’re not too low or dirty, and flush the system as needed to keep those gears shifting smoothly. Be on the lookout for common signs of failure, like slipping gears, strange noises (like whining or clunking), or unexpected delays when shifting. Staying on top of these symptoms can help you catch issues early, saving you time and money in the long run. With a little TLC, your remanufactured transmission can keep your E-350 performing at its best!
Essential Remanufactured Automatic Transmission Maintenance for Your 2016 Ford E-350 Super Duty
If you own a 2016 Ford E-350 Super Duty, you know that maintaining its performance often comes down to the quality of its components—especially when it comes to the automatic transmission. That’s where our remanufactured automatic transmissions come into play! With a focus on reliability, these units are rigorously restored to meet or even exceed OEM specifications, ensuring you get the best out of your ride. Upgrading or replacing a transmission can seem daunting, but when you shop at Advance Auto Parts, you’re not just getting a part; you’re investing in peace of mind with trusted brands that have a reputation for quality. With our extensive selection, competitive pricing, and knowledgeable staff, we make it easy to find exactly what you need to keep your E-350 running smoothly for years to come. Plus, you’ll appreciate the added value of knowing that quality parts can lead to better vehicle performance and longevity—so you can tackle any DIY project with confidence!
Cost of Remanufactured Automatic Transmissions for Your 2016 Ford E-350 Super Duty
At Advance Auto Parts, we’ve got a great selection of remanufactured automatic transmissions, perfect for DIY enthusiasts looking to upgrade or replace their vehicle’s transmission without breaking the bank. Our prices range from $2,569.99 to $4,817.99, with an average around $3,673.74, giving you plenty of options depending on your budget and vehicle needs. Whether you’re tackling a tough repair or just want to ensure your ride shifts smoothly, you can count on our quality brands to deliver reliable performance. Plus, with our expert advice and wide array of parts, getting your car back in top shape has never been easier!
Complete Your 2016 Ford E-350 Super Duty Remanufactured Automatic Transmission Job with the Right Tools and Parts
When tackling the maintenance or repair of remanufactured automatic transmissions, it’s essential to consider a few related products and tools to make the job smoother. You might need new transmission fluid, gaskets, or filters to ensure everything’s in tip-top shape after replacement. Don’t forget about a torque wrench for those critical bolts; they need to be just right to avoid leaks or even improper function. A transmission jack can also be a lifesaver when maneuvering the heavy unit into place. Safety should always be your top priority, so make sure to wear gloves and safety glasses, and consider using a vehicle lift or jack stands to securely elevate the car before you crawl underneath. Remember, a safe workspace not only protects you but also prevents further damage to your vehicle!
Remanufactured Automatic Transmissions for Your 2016 Ford E-350 Super Duty
Shift Pro by ETE – 6R140 Automatic Transmission Assembly (Part No.T162211)
from
$4817.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.
Product Features:
See More
Product Features:
- Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
- All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
- During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
- All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
- Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
- No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
- Product might not be available in all states due to local laws.
Shift Pro by ETE – 6R140 Automatic Transmission Assembly (Part No.T162208)
from
$4817.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.
Product Features:
See More
Product Features:
- Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
- All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
- During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
- All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
- Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
- No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
- Product might not be available in all states due to local laws.
Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T6R1406215T4)
from
$4409.99
All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.
Product Features:
See More
Product Features:
- All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
- 100% of friction components are replaced with upgraded heavy duty parts.
- Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
- 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
- Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
- Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
- 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T6R1406215T2)
from
$4353.99
All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.
Product Features:
See More
Product Features:
- All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
- 100% of friction components are replaced with upgraded heavy duty parts.
- Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
- 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
- Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
- Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
- 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Shift Pro by ETE – 5R110W Automatic Transmission Assembly (Part No.T162612)
from
$2924.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.
Product Features:
See More
Product Features:
- Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
- All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
- During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
- All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
- Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
- No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
- Product might not be available in all states due to local laws.
Shift Pro by ETE – 5R110W Automatic Transmission Assembly (Part No.T162613)
from
$2924.99
At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.
Product Features:
See More
Product Features:
- Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
- All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
- During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
- All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
- Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
- No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
- Product might not be available in all states due to local laws.
Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T5R1106808T2P)
from
$2569.99
All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.
Product Features:
See More
Product Features:
- All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
- 100% of friction components are replaced with upgraded heavy duty parts.
- Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
- 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
- Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
- Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
- 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T5R1106808T2)
from
$2569.99
All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.
Product Features:
See More
Product Features:
- All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
- 100% of friction components are replaced with upgraded heavy duty parts.
- Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
- 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
- Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
- Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
- 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T5R1106808T4)
from
$2569.99
All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.
Product Features:
See More
Product Features:
- All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
- 100% of friction components are replaced with upgraded heavy duty parts.
- Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
- 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
- Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
- Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
- 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T5R1105408T4)
from
$2569.99
All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.
Product Features:
See More
Product Features:
- All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
- 100% of friction components are replaced with upgraded heavy duty parts.
- Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
- 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
- Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
- Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
- 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T5R1105408T2)
from
$2569.99
All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.
Product Features:
See More
Product Features:
- All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
- 100% of friction components are replaced with upgraded heavy duty parts.
- Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
- 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
- Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
- Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
- 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Premium Drive Train – Premium Remanufactured Automatic Transmission Assembly (Part No.T5R1106808T4P)
from
$2569.99
All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required. All of friction components are replaced with upgraded heavy duty parts. Drum assemblies are air checked and side play is checked to assure proper clearance. All of seals, o’rings and gaskets are replaced. All of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing. Transmissions are assembled, end plays are set and fasteners are torqued to the required specification. All of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno test. Transmission park locking mechanism is checked during dyno test. (where applicable). (Torque Converter) All of converters are dynamic balanced. All of pumps are furnaced brazed. All new bearings and o’rings. All new springs and rollers in stator. All new thrust washers. All new friction liners in overdrive lockup converters. Converter endplay and hub/pump runout and diameter is checked.
Product Features:
See More
Product Features:
- All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
- 100% of friction components are replaced with upgraded heavy duty parts.
- Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
- 100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear.
- Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
- Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
- 100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
FAQs for 2016 Ford E-350 Super Duty Remanufactured Automatic Transmissions
Which Remanufactured Automatic Transmissions are the top sellers for the 2016 Ford E-350 Super Duty?
Out of 12 Remanufactured Automatic Transmissions that fit 2016 Ford E-350 Super Duties, the following parts are the top sellers:
from
$4409.99
This product is not rated
Premium Remanufactured Automatic Transmission Assembly
Remanufactured Automatic Transmissions
from
$2569.99
This product is not rated
Premium Remanufactured Automatic Transmission Assembly
Remanufactured Automatic Transmissions
from
$2569.99
This product is not rated
Premium Remanufactured Automatic Transmission Assembly
Remanufactured Automatic Transmissions
How can I make sure that a part will be compatible with my 2016 Ford E-350 Super Duty?
Our Ford E-350 Super Duty aftermarket and OEM parts are designed specifically for the 2016 model. You can always find your specific fitment and compatibility for your 2016 Ford on an individual product page.
What is the price range for 2016 Ford E-350 Super Duty Remanufactured Automatic Transmissions?
The range of prices of Remanufactured Automatic Transmissions for the 2016 Ford E-350 Super Duty goes from $2,569.99 up to $4,817.99 for the most premium parts.
What is the average price of 2016 Ford E-350 Super Duty Remanufactured Automatic Transmissions?
2016 Ford E-350 Super Duty Remanufactured Automatic Transmissions average $3,305.82 for our selection of OEM and aftermarket parts.
Does Advance Auto Parts sell Remanufactured Automatic Transmissions for other Ford E-350 Super Duty model years?
Can I get help with 2016 Ford E-350 Super Duty Remanufactured Automatic Transmissions orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Remanufactured Automatic Transmissions and more.
What is your return policy for Ford E-350 Super Duty Remanufactured Automatic Transmissions?
Advance Auto Parts keeps returns simple. For new Ford E-350 Super Duty Remanufactured Automatic Transmissions and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
Remanufactured Automatic Transmissions For Other Ford E-350 Super Duty Model Years
Looking for parts for a different model year of the Ford E-350 Super Duty? Below, you’ll find links to Remanufactured Automatic Transmissions for a range of model years, from 2000 models all the way up to 2019. At Advance Auto Parts, we carry high-quality OEM and aftermarket auto parts for popular years like 2010, 2011, 2012, 2013, 2014, 2015, 2017, 2018, 2019, and more, ensuring you have access to the best options for your specific needs. Choosing a Remanufactured Automatic Transmissions from Advance Auto Parts means investing in top-tier parts that will keep your Ford E-350 Super Duty running at its best, no matter the year.
