2016 Dodge Dart Exhaust Parts

Below you will find various in-demand Dodge Exhaust Parts, components and accessories for your 2016 Dart. Advance Auto Parts has popular Dart parts like Exhaust Pipes, Exhaust Manifold and Headers, Exhaust Fittings and more. You’ll also find aftermarket and OEM Exhaust Parts for other Dart model years including 1971, 1972, 1973, 1974, 1975, 1976, 2013, 2014, 2015 and more. Select a category of 2016 Dodge Dart Exhaust Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2016 Dodge Dart Exhaust Parts Categories

Exhaust Manifold and Headers

Mufflers

Catalytic Converters

Tail Pipes

Exhaust Manifold and Header Hardware

Catalytic Converter Gaskets

Exhaust Manifold Gaskets

Exhaust Clamps

Exhaust Pipe and Flange Gaskets

Essential Exhaust Parts for 2016 Dodge Darts

from

$137.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$173.99

The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$135.99

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$54.99

Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.

Product Features:

100 Percent Flexible Graphite Construction
Designed To Withstand Clamping Force And Incredible Heat
Eliminate Exhaust Leaks
No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque

from

$42.99

Mr. Gasket Performance Exhaust Gaskets are manufactured from high-temperature composite material. They provides maximum torque retention to eliminate gasket failure. Precision die cut for an excellent fit, but can be trimmed if necessary for modified port applications. For OE replacement, high-performance street, drag race and oval track. Rectangular Ports, 1.30 inch x 1.80 inch

Product Features:

Manufactured from high-temperature acrylic blend exhaust material
Provides excellent sealing and durability
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Precision Die Cut For Excellent Fit

from

$45.49

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Has A Steel Core With Graphite Facing
Graphite Facing Has Excellent Thermo-conductivity
High Recovery Mat Allows For Better Seal Retention

from

$7.19

Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT – Designed to resist heat for long-lasting performance
PREMIUM MATERIALS – Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$396.99

Designed, tested and validated for assured compliance to meet CARB standards, Walker® CalCat® Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
BUY WITH CONFIDENCE — Backed by Walker’s emissionsáandástructural integrity warranty.áVisit Walkerexhaust.com for details

from

$561.99

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 3322305. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

Compact, lightweight construction enables installation in confined areas, welding is required
Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Compact, lightweight construction enables installation in confined areas, welding is required
Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off

from

$464.99

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty

from

$1289.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51148. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2013 Dodge Dart 1.4L & 2012-2013 Fiat 500 1.4L. MagnaFlow 51148 includes (6) Bolts and interchanges with OE parts 6808 1928AA, 6808 1928AB, 6808 1928AC, 6808 3897AC, 6827 1491AA. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$2.99

Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:

CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from quality material for durability and long life
BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

from

$2.99

CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from quality material for durability and long life
BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

from

$49.49

Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.

Product Features:

12 per Package
Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
410 stainless steel
Minimum 180,000 PSI tensile strength
24 equally spaced clockwise teeth

from

$49.99

Vibe-Lock Bolt

from

$12.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$2.59

AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT – Designed to resist heat for long-lasting performance
PREMIUM MATERIALS – Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$2.79

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$4.29

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$696.99

This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
Convenient kit – includes gaskets and downpipe hardware to simplify installation
Durable construction -manufactured within strict tolerances for reliable longevity
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$1127.99

Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Product Features:

Long Tube Lengths
Long Transition Collectors
Monstrous Low-Mid Range Torque
Keep Top End Horsepower
Provides Finest Fit
Most Durable Design Available

from

$406.99

Full length and fenderwell headers provide the ultimate performance for streetrodders with high performance engines. These header styles have longer primarytubes, which help produce more horsepower and torque than Tight Tucks. Chassisheaders fit inside

Product Features:

Patriot Exhaust H8206 1 5/8″ Full Length Header Mopar A Body Small Block Mopar 67-82 Raw
Full length headers are typically used for higher RPM horsepower, but can also increase the mid range torque in applications were there is room to fit a long tube design.

from

$1127.99

Long Tube Lengths
Long Transition Collectors
Monstrous Low-Mid Range Torque
Keep Top End Horsepower
Provides Finest Fit
Most Durable Design Available

from

$1007.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Manifold Catalytic Converter 22-158. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 22-158 includes (2) Flange Gaskets, (5) Bolts, (2) Nuts, (2) Split Lock Washers and interchanges with OE parts 6806 6674AA, 6806 6674AB, 6806 6674AC, 6808 1818AB, 6808 1818AC, 6824 6553AA, 6835 0592AA. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$1025.99

Long Tube Lengths
Long Transition Collectors
Monstrous Low-Mid Range Torque
Keep Top End Horsepower
Provides Finest Fit
Most Durable Design Available

from

$931.99

Product Features:

EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
DIRECT-FIT DESIGN – Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
STRONG AND DURABLE – Features thick OE-style flanges and manifolds for strength and durability
OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

from

$666.99

Patriot Exhaust H8206-1 1 5/8″ Full Length Header Mopar A Body Small Block Mopar 67-82 Coated
Full length headers are typically used for higher RPM horsepower, but can also increase the mid range torque in applications were there is room to fit a long tube design.

from

$393.99

Product Features:

Gen III Hemi swap exhaust manifolds – a compact, high-flow design with a factory look that is ideal for engine swaps with limited space
Choose from plain as-cast, black ceramic, or silver ceramic finishes – ceramic finish reduces underhood heat and resists corrosion
Intended for Gen III Hemi engine swap applications where durability, quiet operation, and leak-free sealing are desired
Cast from heavy-duty hi-silicon-moly ductile iron for long-lasting durability and corrosion resistance
2.50-inch outlet diameter offers improved flow for maximum performance from cast iron exhaust manifolds
Includes collector flanges, Multi-Layer stainless Steel (MLS) collector gaskets, and bolts – that make it easy to fabricate downpipes
Works with left or right-hand side starters and all popular transmissions
The slotted bottom row of holes makes it easy to install (on pre-installed lower bolts and gaskets for each cylinder head)
Ideal for use in applications that require Catalytic convertors

Upgrade your 2016 Dodge Dart with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 2016 Dodge Dart, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Exhaust Parts are key to keeping your Dart functioning at its best. At Advance Auto Parts, we offer a wide selection of 14 Exhaust Parts for the 2016 Dodge Dart, designed to meet your needs without breaking the bank. From Exhaust Pipe replacements to Exhaust Manifold and Headers upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2016 Dodge Dart at great prices. Our Exhaust Parts inventory for this model ranges from just $2.59 to $1,155.99, with an average price of $259.97. Our 14 Exhaust Parts in stock come from 5 trusted brands, so you’re sure to find the right part for your 2016 Dodge Dart without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2016 Dodge Dart, we stock popular OEM and aftermarket Exhaust Parts from top names like Walker, and more. Walker Exhaust Parts start at just $2.59 and boast an impressive 4.2 stars average rating from customers. With 376 customer reviews and counting, our 2016 Dodge Dart Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2016 Dodge Dart is always ready to roll. We’re committed to providing you with everything you need to keep your Dart in top shape, all in one place. Start shopping confidently below for your 2016 Dodge Dart!

Best-Selling Exhaust Pipes for 2016 Dodge Darts

Enhance the driving experience in your Dodge with 4 quality Exhaust Pipe components, starting at $2.59.

show more show less

from

$2.59

AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
HEAT RESISTANT – Designed to resist heat for long-lasting performance
PREMIUM MATERIALS – Made from high-quality materials for durability and long life
ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

from

$12.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$45.99

Made from aluminized steel for durability, Walker® premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.), Outlet Diameter (O.D.) connection; see product specifications for more information
COMPATIBILITY — Ideal for weld or clamp installations

from

$45.99

RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.), Outlet Diameter (O.D.) connection; see product specifications for more information
COMPATIBILITY — Ideal for weld or clamp installations

Top Picks for 2016 Dodge Dart Exhaust Fittings

Upgrade Dodge Darts with top-quality Exhaust Fittings parts, including 1 OEM and aftermarket selections for your 2016 model.

show more show less

from

$2.99

CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS – Made from quality material for durability and long life
BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade

In-Demand Exhaust Gaskets for 2016 Dodge Darts

Select from 1 premium Exhaust Gaskets parts for your 2016 Dodge Dart.

show more show less

from

$23.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold

Most Sold 2016 Dodge Dart Exhaust Mufflers

Explore our best-selling Dodge parts for the 2016 Dart among 1 OEM and aftermarket options starting from $173.99.

show more show less

Quiet-Flow SS Direct Fit Exhaust Muffler Assembly

from

$173.99

Product Features:

CORROSION RESISTANT STAINLESS STEELá–áThe only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot weldsáprovideástability and longer service life

Top-Rated Exhaust Parts Brands For Your 2016 Dodge Dart

Shop for the best-rated brands offering Exhaust Parts and other products for your 2016 Dodge Darts. Below you’ll find some of our best rated Exhaust Parts from Walker, and more. Exhaust Parts from these brands that fit a 2016 Dart start at just $2.59 and are rated as high as 4.2 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Walker 2016 Dodge Dart Exhaust Parts

When it comes to maintaining or upgrading your 2016 Dodge Dart, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Walker ticks all of those boxes. We offer a wide selection of Walker Exhaust Parts, specifically designed for the 2016 Dodge Dart. With over 2 Walker brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.59, with an average price of just $4.89. Plus, with over 47 customer reviews and an average rating of 4.2 stars, you can trust that our Walker Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $2.59

(23)

Exhaust Pipe Flange Gasket

“Right part”

from $7.19

(24)

Exhaust Pipe Flange Gasket

“installed with resonator had went bad”

FAQs for 2016 Dodge Dart Exhaust Parts

Which Exhaust Parts are best-sellers for 2016 Dodge Darts?

Out of 14 Exhaust Parts that fit 2016 Dodge Darts, the following parts are the top sellers:

Vibe-Lock Bolt (10556931) – $49.99
Manifold Converter – Not CARB Compliant – Not For Sale – NY – CA – ME (11953661) – $696.99
Exhaust Pipe Flange Gasket (12044998) – $12.49

What’s the price range for 2016 Dodge Dart Exhaust Parts?

Exhaust Part prices for the 2016 Dodge Dart start at $2.59 and go up to $1,155.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 2016 Dodge Dart?

The average price for Exhaust Parts for the 2016 Dodge Dart is $259.97. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other Dodge Dart model years?

Yes, we currently carry Exhaust Parts for 19 model years of Dodge Darts between 1960 and 2015. Exhaust Parts are bought most frequently for the following model years: 2015, 2014, 2013, 1976, 1975, 1974, 1973, 1972, and 1971.

What are the cheapest Exhaust Parts for my 2016 Dodge Dart?

The cheapest 2016 Dodge Dart Exhaust Parts we carry in stock are:

Exhaust Pipe Flange Gasket (5601118) – $2.59
Exhaust Clamp (11012223) – $2.99
Exhaust Pipe Flange Gasket (18370231) – $7.19
Exhaust Pipe Flange Gasket (12044998) – $12.49
Exhaust Manifold Gasket Set (12081611) – $23.99

What types of Exhaust Parts do you sell for my 2016 Dodge Dart?

As of 3/1/26, these are some of the most in-demand types of Exhaust Parts for a 2016 Dodge Dart:

Can I get help with 2016 Dodge Dart Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Exhaust Parts and more.

What is your return policy for Dodge Dart Exhaust Parts?

Advance Auto Parts keeps returns simple. For new Dodge Dart Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2016 Dodge Dart Exhaust Parts

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942446)

Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)

Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.8042441)

Remflex – Flexible Graphite, Set Of 2, 1-3/32 Inch X 1-7/16 Inch Square Port Size (Part No.6008)

Mr. Gasket – Exhaust Gasket Set (Part No.358)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5935)

Walker – Exhaust Pipe Flange Gasket (Part No.31578)

Walker – CalCat CARB Universal Catalytic Converter, 2.25" Inlet (ID) 2.25"Outlet (ID) (Part No.81327)

MagnaFlow – Universal California Grade CARB Compliant Catalytic Converter (Part No.3322305)

Walker – CalCat CARB Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.81127)

MagnaFlow – Direct-Fit OEM Grade Federal / EPA Compliant Catalytic Converter (Part No.51148)

Walker – Exhaust Clamp (Part No.35335)

Walker – Exhaust Clamp (Part No.35336)

Mr. Gasket – Exhsthdrbolt (Part No.2230G)

Taylor Gaskets – Vibe-Lock Bolt (Part No.310072)

Felpro – Exhaust Pipe Flange Gasket (Part No.61811)

Walker – Exhaust Pipe Flange Gasket (Part No.31337)

Felpro – Exhaust Pipe Flange Gasket (Part No.9547)

Felpro – Exhaust Pipe Flange Gasket (Part No.60025)

Dorman – Manifold Converter – Not CARB Compliant – Not For Sale – NY – CA – ME (Part No.674-303)

Hooker Headers – Super Comp. Header (Part No.5205HKR)

Patriot Exhaust – H8206 1 5/8" Full Length Header Mopar A Body Small Block Mopar 67-82 Raw (Part No.H8206)

Hooker Headers – Super Comp. Header (Part No.5215HKR)

MagnaFlow – Direct-Fit OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.22-158)

Hooker Headers – Super Comp. Header (Part No.5602HKR)

Walker – Ultra EPA Direct-Fit Catalytic Converter with Integrated Exhaust Manifold (Part No.16795)

Patriot Exhaust – H8206-1 1 5/8" Full Length Header Mopar A Body Small Block Mopar 67-82 Coated (Part No.H8206-1)

Hooker BlackHeart – Hooker BlackHeart Gen III Hemi Swap Exhaust Manifolds – Low Profile (Part No.BHS582)

Walker – Exhaust Pipe Flange Gasket (Part No.31337)

Felpro – Exhaust Pipe Flange Gasket (Part No.61811)

Walker – Exhaust Tail Pipe, Pipe Diameter 2" (Part No.52984)

Walker – Exhaust Tail Pipe, Pipe Diameter 2" (Part No.52985)

Dorman – Manifold Converter – Not CARB Compliant – Not For Sale – NY – CA – ME (Part No.674-303)

Taylor Gaskets – Vibe-Lock Bolt (Part No.310072)

Dorman – Manifold Converter – Not CARB Compliant – Not For Sale – NY – CA – ME (Part No.674-093)

MagnaFlow – Direct-Fit OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.22-158)

Walker – Ultra EPA Direct-Fit Catalytic Converter with Integrated Exhaust Manifold (Part No.16795)

Walker – Exhaust Clamp (Part No.35335)

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97401)

Walker – Quiet-Flow SS Direct Fit Exhaust Muffler Assembly (Part No.50392)